Flyspray - The bug killer!

This is the Bug Tracking System for the Flyspray project. This is not a demo!

2019-04-22: Flyspray 1.0-rc9 released See https://github.com/Flyspray/flyspray/releases

ID Category Task Type Severity Summary Status Progress Assigned To Due In Version   desc Opened Last Edited
2453Backend/CoreBug ReportMediumvalidate category before storing a new taskNew
0%
1.014.12.201714.12.2017 Task Description

Currently the category_id is not checked if the value is legal for the project when a new task is created.

  • must be unsigned int
  • must be an active category_id of the project or global category.
  • setting a category_id must be allowed - see project settings.

If invalid category_id is sent, deny creating task and show error message and show filled form again.

If no category_id is sent (or empty string) and category select is enabled:

  • either choose a default category

or

  • implement feature request FS#2451 and show that user should select a category.
2444Installer and UpgraderInformationLowcomposer hits memory limitsNew
0%
04.10.201704.10.2017 Task Description

Quick anwser: enable swap partition on your server.

Tried upgrading a rc4-dev to rc5-dev/rc6/flyspray-master on a virtual server with 500MB RAM and php5.6.30 on the commandline (debian)

After file upgrade, I wanted also update the vendor stuff according to composer.json changes.

But surprisingly this failed:

php composer.phar update

and also after

php composer.phar selfupdate


to version Composer version 1.5.2 2017-09-11 the memory limit bug exists:

The following exception is caused by a lack of memory or swap, or not having swap configured
Check https://getcomposer.org/doc/articles/troubleshooting.md#proc-open-fork-failed-errors for details

PHP Warning:  proc_open(): fork failed - Cannot allocate memory in phar:///var/www/***/composer.phar/vendor/symfony/console/Application.php on line 979

Warning: proc_open(): fork failed - Cannot allocate memory in phar:///var/www/***/composer.phar/vendor/symfony/console/Application.php on line 979

  [ErrorException]
  proc_open(): fork failed - Cannot allocate memory

Also doing a more fresh vendor install like

rm composer.lock
rm vendor/*
(keeps the .htaccess there)
php composer.phar install

300 MB not enough for a handful of php package installations? wtf, but didn’t dig deeper..

I temporarly solved the problem by making a swap partition on this vServer like suggested at
https://getcomposer.org/doc/articles/troubleshooting.md#proc-open-fork-failed-errors

/bin/dd if=/dev/zero of=/var/swap.1 bs=1M count=1024
/sbin/mkswap /var/swap.1
chmod 600 /var/swap.1
/sbin/swapon /var/swap.1
free
             total       used       free     shared    buffers     cached
Mem:        506300     374920     131380      30628      21904     143872
-/+ buffers/cache:     209144     297156
Swap:      1048572          0    1048572

This is just documentation and is for the people who prefer a Flyspray development version from github.com

Full Flyspray release download files do not needs to fiddle with composer.

Maybe an entry for the FAQ

2440Backend/CoreFeature RequestLowOption to disable tag featureNew
0%
15.09.201715.09.2017 Task Description

There is a wish on the Flyspray mailing list:

Is there a way of hiding the TAGS input field from the Add New Task form?
Alan

If it is just hiding on that form, there are several options to achieve this (from simple to complex)

A) Hide by CSS

Add that rule to themes/CleanFS/theme.css CSS file:

#edit_tags{display:none;}

B) Hide by CSS (better)

Add a rule to a custom_*.css, for instance themes/CleanFS/custom_mytheme.css

#edit_tags{display:none;}

and choose custom_mytheme.css in your project settings.

D) Edit themes/CleanFS/templates/newtask.tpl directly

and remove the whole div-tag with id=”edit_tags” (all between ‘<div id=”edit_tags>”’ and its closing ‘</div>’ (not recommended)

E) Use a custom template

  1. Create a folder in themes/, for instances themes/mynotagtheme/
  2. Only copy themes/CleanFS/templates/newtask.tpl to themes/mynotagtheme/templates/newtask.tpl
  3. Make the changes to that newtask.tpl like in B) (custom theme not overwritten by Flyspray Updates if you keep or backup your themes/mynotagtheme/ folders, but requires review if something has changed within themes/CleanFS/templates/newtask.tpl between version updates)
  4. Choose your mynotagtheme as project theme. All other files fall back to default themes/CleanFS/

(not tested, but thats the way it should work with current Flyspray 1.0-rc5)

D) Nag or caress someone

to finish tag feature for Flyspray with options/permissions to turn it off per project or project group or something like that.

This would effect not only that newtask form but all places where that options should kick in (listing tags in tasklist, tasklist filters etc)

2441Backend/CoreBug ReportMediumrefactor dokuwiki image tagsNew
0%
15.09.201715.09.2017 Task Description
I’ve tried inserting an image in the intro message but it doesn’t show. Is there something broken in the formattext.inc file? Seems unlikley because it’s so old but can’t work out why nothing shows.
Alan

I had to disable some parts last year within dokuwiki quickly due sever reported security issues in that area.

As tradeoff embedding images currently don’t work within dokuwiki textareas in Flyspray.

As I too wish that feature reappear working for my projects, this is on my personal list. But requires focused free time because must be made secure.

Maybe instead of using fetch.php of dokuwiki, we can use Flypsray’s ?getfile=id , which also checks permissions.
But must check also securly file types and maybe resize images to fit into the desired page (thumbnails).

2439Backend/CoreFeature RequestLowClone a ProjectNew
0%
15.09.201715.09.2017 Task Description

There is a request for cloning a project on Flyspray mailing list:

Would be a very welcome features to have Project Templates for repetitive workflow. Any idea if its in the pipeline?
Thanks

Well, not yet.

The question is, how exactly you want that project clone.

Do you want just a rough copy of the project table entry?
Thats quite easy and can even be done without programming or writing a line of SQL just by using PHPMyAdmin (or similiar Tools for PostgreSQL) and copy a row of the project table for example.
See yellow marked project table on the right of the attached dbschema screenshot.

The other extreme is copying every project depending list table entries to new ones.
This sure requires some programming, but not too hard to add this to Flyspray. (all yellow marked tables in the attached dbschema screenshot.

I attach a rough form mockup how could this could look like.

Possible solution

  1. add a new file scripts/ folder for instance copyproject.php (check admin permission)
  2. add a template file to themes/CleanFS/templates/copyproject.tpl
  3. Set a link to that clone form page somewhere, for example on the toplevel page of a project (see screenshot)
  4. Handle the adminuser (or add a clonepermission for that project manager usergroup) submitted form careful and savely either by includes/modify.inc.php (or like scripts/copyproject.php to keep it seperate from core)

The link to the clone form looks then ?project=123&do=copyproject

2030User InterfaceFeature RequestLowshow votes of a user on user pageNew
0%
12.08.201515.01.2017 Task Description

On the user page

/index.php?do=user&area=users&id=*
or
/index.php?do=user&area=users&id=*&project=1
or
/index.php?do=user&area=users&id=*&switch=1 (project switch select)

an info could be shown how many votes a user has given.

Maybe show the tasks on mouse hover (:hover) if permission to view them exists.

Needs to be considered:

  • Show count only for current project or all projects? (project param is optional on user page)
  • counts of hidden, closed or restricted projects (user permission)
  • How to handle votes of private tasks?
  • Show votes of closed tasks too? (votes on closed tasks should don’t count for max votes per project)
  • When personal “max votes per project” (open tasks) is active, this is of more value.


2324Backend/CoreInformationLowUpdate composer.jsonUnconfirmed
0%
31.12.201631.12.2016 Task Description
...
symfony/event-dispatcher suggests installing symfony/dependency-injection ()
symfony/event-dispatcher suggests installing symfony/http-kernel ()
guzzle/guzzle suggests installing guzzlehttp/guzzle (Guzzle 5 has moved to a new package name. The package you have installed, Guzzle 3, is deprecated.)
Package guzzle/guzzle is abandoned, you should avoid using it. Use guzzlehttp/guzzle instead.
2315Backend/CoreBug ReportLowFiling a new task is possible with no details in the ma...Unconfirmed
0%
21.11.201621.11.2016 Task Description

When filing a task, it’s possible to submit the task without any information at all being added to the main body of the ticket. This leads to reports that are of no value because the user can simply add some vague title, hit submit, and then wonder why nothing happens other than someone closing it later as invalid.

The main body of the ticket should be considered a required field and should throw an error if nothing is in the box.

2221Installer and UpgraderInformationLowNotices on install with PHP7New
50%
1.0124.10.201624.10.2016 Task Description
Notice: Only variables should be assigned by reference in /*/setup/index.php on line 883 
Notice: Only variables should be assigned by reference in /*/setup/index.php on line 949
2200User InterfaceBug ReportMediumIncomplete list of timezones available in the user pref...Unconfirmed
0%
26.08.201626.08.2016 Task Description

The user preferences and the add new user screens both allow you to set the timezone offset of the user, however, we are only provided with whole hour offsets from GMT. This makes it impossible to select our timezone here in India, which is GMT+5:30 - IST(Indian Standard Time - Asia/Kolkata as per TZ Zoneinfo). In addition, there are also timezones in the GMT+x:45, which wouild also require to be handled. Note, this is totally independent of DST Changes, since some of the countries use DST(Like in Australia) and others do not(Like India).

Here is a link with more details of the same - http://www.timeanddate.com/time/time-zones-interesting.html

I will be trying to identify and fix the codebase to resolve this, and will hopefully have a patch to submit soon.

Regards
R. K. Rajeev

2193User InterfaceFeature RequestLowEdit a comment while seeing task details and other comm...New
0%
07.08.201608.08.2016 Task Description

If someone with ‘edit comment’-permission wants to edit a comment, the edit comment form is shown on an extra page.

This is not optimal, because the editor cannot see task details or the other comments while modifying the comment.

Possible Solutions

  • with javascript is enabled: Stay on the ‘task detail’-page, just the comment changes from a ‘view’ layout to ‘edit’ layout, similiar to the quickedit-feature (like in FS1.0).
  • when javascript is disabled: The ‘edit comment’-page shows task details (check permissions) and other comments too, but maybe a bit narrow, so ‘visible focus’ is on editing the comment.
2190Backend/CoreFeature RequestLowenable move of a closed clask to other project without ...Researching
0%
06.08.201606.08.2016 Task Description

Problem: By replacing just the project_id of the closed task it is possible the task then has invalid field values within the target project.

Possible scenarios:

  1. Ignore invalid values within the target project
    • Pro: Easy to do, an immidiatly revert back to the old project would “heal” the task properties.
    • Contra: may effect accuracy and reliability of other parts like searching, listing, statistic calculations
  2. Silent change task field values to valid field values of the target project if necessary
    • Pro: relative easy to do
    • Contra: a bit loss of information, little side effects
  3. allow user to modify the fields that must be changed so that every field of the task has valid values within the target project
    • Pro: accuracy
    • Contra: a bit loss of information(fallback to default values) if there are no similiar field values selectable within the project
  4. allow user to modify the fields, fields or field select values that do not exists in target project will be automatically created.
    • Pro: accuracy
    • Contra: target project may be cluttered with too many fields/field values
  5. ???
2188Backend/CoreBug ReportVery LowIt should not possible to relate a task to itselfNew
0%
01.08.201601.08.2016 Task Description

Flyspray should show a warning, and maybe set the focus back to the field (only when it is a this-one-field-only-form.)

2142Backend/CoreBug ReportLowPost-authenticate redirect does not make use of baseurl...Unconfirmed
0%
28.06.201601.08.2016 Task Description

I run flyspray behind a reverse proxy with the front end url being https and with the actual back end server not being on a standard port and not using https.

Setting force_baseurl seems to sort most areas with flyspray’s url generation using that instead of picking up from $_SERVER, however post-authentication redirection does not do that it just processes redirect_to as is (which in my case means it picks up the protocol, name and port for the back end server rather than what’s set in force_baseurl).

./themes/CleanFS/templates/loginbox.tpl puts out $_SERVER[’REQUEST_URI‘] into a hidden redirect_to input field - on my setup on the front page that’s e.g. “/” or for a ticket url it would be “/index.php?do=details&task_id=999” so no protocol or hostname.

scripts/authenticate.php picks up that redirect_to value and just passes it to Flyspray::Redirect, which in turn calls FlySpray::absoluteURI on what it’s passed, and FlySpray::absoluteURI doesn’t use $baseurl to qualify the url.

Not sure what the best fix is - my suggestion would be that Redirect detects urls that aren’t fully qualified and adds the $baseurl on to the front of them, rather than calling absoluteURI (absoluteURI is used to set $baseurl if force_baseurl is unset, so that’s not appropriate to modify). Alternatively scripts/authenticate.php could check redirect_to and add $baseurl if needed.

2160Backend/CoreBug ReportLowCannot "accept" PM close request if already closedUnconfirmed
0%
14.07.201614.07.2016 Task Description

If a task creator requested closure, and someone (developer) closes the task explicitly, the PM request cannot be later ‘accepted’ and the PM request remains in the queue.

Workaround - Deny request and queue item is removed OK.

It looks like the PM request button invoked details.close which returns early if task is already closed.

2138User InterfaceFeature RequestVery LowOverhaul dokuwiki editor buttonbarNew
0%
17.06.201617.06.2016 Task Description

Rethink the current sets of buttons and their functionality.

Maybe a mousover hint/cheatsheet of available dokuwiki syntax is more helpful in writing fast and efficient.

  • buttongroup links http,email,ftp
  • buttongroup code, code php: why a single button for php? maybe a cheatsheet or subselect for choosing a language (read directory plugins/dokuwiki/inc/geshi for that). Or even better: Let the project administrator define what source code languages are used/popular in a software project and dependend of that setting prefer/promote that languages
  • I miss a blockquote- or cite-tag for citation, which is more semantic than bold, italic, underline buttons. Update: It is the > character followed by text!
  • Show a cheatsheet (by mouseover?) of dokuwiki smileys as defined at plugins/dokuwiki/conf , update to current config of dokuwiki, facepalm for instance is missing
8-) 8-O 8-o :-( :-) =) :-/ :-\ :-? :-D :-P :-o :-O :-x :-X :-| ;-) ^_^ :?: :!: LOL FIXME DELETEME

8-) icon_cool.gif 8-O icon_eek.gif 8-o icon_eek.gif :-( icon_sad.gif :-) icon_smile.gif =) icon_smile2.gif :-/ icon_doubt.gif :-\ icon_doubt2.gif :-? icon_confused.gif :-D icon_biggrin.gif :-P icon_razz.gif :-o icon_surprised.gif :-O icon_surprised.gif :-x icon_silenced.gif :-X icon_silenced.gif :-| icon_neutral.gif ;-) icon_wink.gif ^_^ icon_fun.gif (not working as first character on a line, bug?) :?: icon_question.gif :!: icon_exclaim.gif LOL icon_lol.gif FIXME fixme.gif DELETEME delete.gif

2139User InterfaceFeature RequestVery LowAdd project setting of popular used programming languag...New
0%
1.1 devel17.06.201617.06.2016 Task Description

This is at the moment just a bit brainstorming ..:

Let the project administrator define what source code languages are used/popular in a software project and dependend of that setting prefer/promote that languages at the dokuwiki editor buttonbar.

This requires probably an additional database field in the flyspay_projects table (if just used for dokuwiki that should be ok)

If thinking further like Filter me all software projects that may ontain CSS code on the projects overview, a m:n-table setup is thinkable. But thats maybe overengineering..
Or can we use the existing tag-feature for that and just ‘tag’ projects with tags?

2137Backend/CoreBug ReportLowfeature accesskey bad implemented by web browsersNew
0%
15.06.201615.06.2016 Task Description

My tests showed that the html accesskey feature is not well and consistent supported by current web browsers and is quite cumbersome to use.
And it seems it will not be better in future..

The only solution I see dropping that feature or replacing them with simple single-key-event javascript listeners, like it is currently done with keys o, j, k, n, and p.

accesskeys in Flyspray I talk about:

  • l (current SHIFT+ALT+l Firefox) login dialog / logout
  • a (current SHIFT+ALT+a Firefox) add new task
  • m (current SHIFT+ALT+m Firefox) my searches
  • t (current SHIFT+ALT+t Firefox) focus taskid search
  • e (current SHIFT+ALT+e + Enter Firefox) edit task
  • x or y? (current SHIFT+ALT+y Firefox) close task
  • s (current SHIFT+ALT+s Firefox) save task

Also related to Keyboard navigation: tabindex

2119Backend/CoreBug ReportMediumfunction filter_input not always availableResearching
0%
15.04.201615.04.2016 Task Description

filter_input() is in extension “Filter”.

It is enabled by default since PHP5.2, see http://php.net/manual/en/migration52.new-extensions.php but not “always”, see https://groups.google.com/forum/?hl=de#!topic/flyspray/QM75BvwPqGM

filter_input() is only used at 1 section in Flyspray (since 2014 up to v1.0rc1) in includes/fix.inc.php
This is the commit https://github.com/Flyspray/flyspray/commit/40861911260812c99682fe3456350cb63bb243a9

How do we solve it? Several possibilities:

2039Installer and UpgraderTODOLowReview INSTALL, README, documentation files for release...New
30%
1.023.08.201509.04.2016 Task Description

Check if the install, setup and upgrade instruction are correct:

  • dev/github versions (using composer for dependency resolving)
  • release versions (using composer or complete bundled binary releases containing all dependencies (ADODB, oauth2, ..)
1966User InterfaceFeature RequestLowMy votes on myprofileNew
80%
1.1 devel11.03.201503.11.2015 Task Description
  • On the myprofile page have a section to show all my votes I put on tasks. done!
  • Add the possibility to remove own votes from tasks. done!
  • Implement a limitation of the amount of votes a user can put on tasks for a project. Can be enabled/disabled and amount configured. Done!
  • project based vote limitation
  • When a task is finished/closed, remove the user votes from the task and make that vote again available to the user. Maybe safe the existing historic voting count in an extra field of the task as the votes would drop to 0 on closing the task. removed.

We keep the votes, because a task can be reopened everytime and then the old voters and votes should be visible again. In this case the amount of votes on active task could be a bit greater than allowed, but thats no real problem.
The calculation of done votes and available votes based only on open task and project voting limit.

For example on uservoice.com you have 10 voting points. So you as user has to decide where your priorities are to put your votes.

So all users have more or less the same power to vote for tasks.

2075NotificationsBug ReportHighToo spammy notifications under some circumstancesRequires testing
40%
1.019.10.201503.11.2015 Task Description

danoh on github wants to work on patch. Couldn’t find him here..

2083User InterfaceInformationLowDrag and drop tasks on roadmapUnconfirmed
0%
30.10.201530.10.2015 Task Description

On the roadmap it would make life a lot easier if it was possible to drag and drop tasks into versions.

2078User InterfaceBug ReportMediumlayout of requested close on small displaysNew
0%
1.026.10.201529.10.2015 Task Description

currently absolute positioning overlapping deny button and not full visible

Possible better solution:

  • cssbased toggle
  • left:50%; width:300px;margin-left:-150px;margin-top:50px;
2073Backend/CoreBug ReportLowCouldn't edit comment of anonymous reporterNew
0%
17.10.201517.10.2015 Task Description

I wanted edit/fix the comment of an anonymous reporter, but the edit shows empty content on editing..

(here on closed, but non yet implemented  FS#218 )

2071EmailBug ReportLowNew user e-mail validationConfirmed
0%
14.10.201514.10.2015
2066Installer and UpgraderFeature RequestMediumAutomated site update (like Wordpress)Unconfirmed
0%
209.10.201510.10.2015
1491User InterfaceFeature RequestLowCustom task table columns for individual usersUnconfirmed
0%
2.0301.07.200801.10.2015
2063Backend/CoreFeature RequestVery Lowshow closed/open usage count on do=pm&area=XXXNew
0%
29.09.201529.09.2015
2059Backend/CoreFeature RequestLowusage of github automated/webhook notificationsNew
0%
24.09.201524.09.2015
2058Backend/CoreBug ReportLowClosing of github.com 'Issues' featureNew
0%
24.09.201524.09.2015
2055Backend/CoreBug ReportLowMake the csv export table fields respect the user permi...New
0%
1.1 devel17.09.201517.09.2015
2048Backend/CoreBug ReportLowerror when adding data containing national charactersUnconfirmed
0%
09.09.201509.09.2015
2046User InterfaceFeature RequestLowGrouping in Task List Unconfirmed
0%
104.09.201504.09.2015
2045User InterfaceFeature RequestLowneed add option for can set default Severity and Priori...Unconfirmed
0%
204.09.201504.09.2015
2028Text RenderingBug ReportMediumupgrade dokuwiki 'plugin'New
0%
12.08.201520.08.2015
2034User InterfaceFeature RequestLowreduced extended search form when applicableNew
0%
17.08.201517.08.2015
2023NotificationsFeature RequestLowInform users if reminder is disabled in system settingsNew
0%
04.08.201504.08.2015
2019User InterfaceFeature RequestMediumtitle -tag Waiting on Customer
0%
1.1 devel26.07.201526.07.2015
2016User InterfaceTODOMediumheading and h1, h2, h3New
0%
1.1 devel23.07.201523.07.2015
1774Backend/CoreFeature RequestLowEmail LayoutMaybe
0%
2.011.10.201220.07.2015
2010User InterfaceFeature RequestLoweffort tracking widgetNew
0%
2.018.07.201518.07.2015
2008User InterfaceTODOLowdifference between related tasks and related linksNew
0%
18.07.201518.07.2015
2007Backend/CoreBug ReportLowtime on project overview activity timelinesNew
0%
18.07.201518.07.2015
2005Backend/CoreFeature RequestLowone account, several authenticationsNew
0%
1.1 devel18.07.201518.07.2015
1991User InterfaceFeature RequestMediumAbillity to drill into progress graph from toplevel vie...New
0%
17.04.201524.04.2015
1983Backend/CoreFeature RequestLowExport Roadmap as "Changelog"Unconfirmed
0%
21.03.201521.03.2015
1968User InterfaceFeature RequestLowReplace Expand all / Collapse all on Roadmap page by pu...Planned
0%
1.1 devel12.03.201516.03.2015
1976Backend/CoreFeature RequestLowSave sorting for actual projectPlanned
0%
1.1 devel15.03.201515.03.2015
1971Backend/CoreFeature RequestLowa field like challenge level or doom levelNew
0%
12.03.201512.03.2015
Showing tasks 251 - 300 of 316 Page 6 of 7

Available keyboard shortcuts

Tasklist

Task Details

Task Editing