Flyspray - The bug killer!

This is the Bug Tracking System for the Flyspray project. This is not a demo!

2019-04-22: Flyspray 1.0-rc9 released See https://github.com/Flyspray/flyspray/releases

ID Category Task Type Severity Summary Status Progress  desc Assigned To Due In Version Opened Last Edited
2066Installer and UpgraderFeature RequestMediumAutomated site update (like Wordpress)Unconfirmed
0%
209.10.201510.10.2015 Task Description

All is in the title

vote for this task please

2202Installer and UpgraderBug ReportHighUnable to upgradeUnconfirmed
0%
310.09.201611.10.2016 Task Description

I tried to upgrade from 0.9.9.7 to 1-0-rc1 but I end in an infinite redirection loop

I tried to use the github version, to change the domain name (hosted in dreamhost), to use/not-use the .htaccess, upgraded the version of php from 5.5 to 5.6, to change all the settings in the flyspray.conf.php file, but still having the error after to perform the Upgrade task and removing the setup dir

Used the prepacked dependencies since i cannot install them in this server

Thanks
Thanatermesis

2319Installer and UpgraderBug ReportHighUpdate failed with "invalid byte sequence for encoding ...Unconfirmed
0%
223.11.201609.12.2016 Task Description

I’m trying to upgrade from 0.9.9.7 to 1.0-rc4 but the Upgrader stops with this message:

Query {UPDATE "tasks" SET detailed_desc = ?WHERE task_id = ?} with params {,400} Failed! (ERROR: invalid byte sequence for encoding "UTF8": 0xc3 0x3c)

Ubuntu 14.04.5 LTS
PostgreSQL 9.3.10

2444Installer and UpgraderInformationLowcomposer hits memory limitsNew
0%
04.10.201704.10.2017 Task Description

Quick anwser: enable swap partition on your server.

Tried upgrading a rc4-dev to rc5-dev/rc6/flyspray-master on a virtual server with 500MB RAM and php5.6.30 on the commandline (debian)

After file upgrade, I wanted also update the vendor stuff according to composer.json changes.

But surprisingly this failed:

php composer.phar update

and also after

php composer.phar selfupdate


to version Composer version 1.5.2 2017-09-11 the memory limit bug exists:

The following exception is caused by a lack of memory or swap, or not having swap configured
Check https://getcomposer.org/doc/articles/troubleshooting.md#proc-open-fork-failed-errors for details

PHP Warning:  proc_open(): fork failed - Cannot allocate memory in phar:///var/www/***/composer.phar/vendor/symfony/console/Application.php on line 979

Warning: proc_open(): fork failed - Cannot allocate memory in phar:///var/www/***/composer.phar/vendor/symfony/console/Application.php on line 979

  [ErrorException]
  proc_open(): fork failed - Cannot allocate memory

Also doing a more fresh vendor install like

rm composer.lock
rm vendor/*
(keeps the .htaccess there)
php composer.phar install

300 MB not enough for a handful of php package installations? wtf, but didn’t dig deeper..

I temporarly solved the problem by making a swap partition on this vServer like suggested at
https://getcomposer.org/doc/articles/troubleshooting.md#proc-open-fork-failed-errors

/bin/dd if=/dev/zero of=/var/swap.1 bs=1M count=1024
/sbin/mkswap /var/swap.1
chmod 600 /var/swap.1
/sbin/swapon /var/swap.1
free
             total       used       free     shared    buffers     cached
Mem:        506300     374920     131380      30628      21904     143872
-/+ buffers/cache:     209144     297156
Swap:      1048572          0    1048572

This is just documentation and is for the people who prefer a Flyspray development version from github.com

Full Flyspray release download files do not needs to fiddle with composer.

Maybe an entry for the FAQ

2222GreekInformationVery LowGreek translation issuesUnconfirmed
0%
324.10.201624.10.2016 Task Description

After completing the Greek translation I have a series of issues I want to report concerning mainly (but not limited to) the Greek languange.

I was thinking of opening a separate task for each one of them (note that they are all ultra low severity/priority) and adding them as sub-tasks to this one (or maybe as dependencies - or both).

I also request a Translations > Greek sub-category. I really have a lot of issues.

2223GreekBug ReportVery LowSome strings need splitting or replacementUnconfirmed
0%
2124.10.201625.10.2016 Task Description

There is a conflict in meaning in some words. In English past tense (”he closed the task”) and past participle (”List of closed tasks”) is the same word. But in Greek they are two different words (past tense of close: έκλεισε, past participle of close: κλεισμένος/κλεισμένη/κλεισμένο/.../etc → (actually, past participle has 3 genders (male/female/neutral) x 2 grammatical numbers (singular/plural) x 4 grammatical cases (nominative/genitive/accusative/vocative)) = 24 combinations but we’ll deal with this later if needed).

So, strings that now are used both as past tense and past participle, or used both for singular and plural, must split and use a different string when past tense and a different string when past participle or singular/plural.

These strings are:

varvaluenotes
openedOpened It is used in Event log as past tense (meaning: “User X opened Y task” or “Y task was opened by X” → so in Greek must either use past tense or past participle as singular because it’s one task) and it is also used in Overview as past participle (meaning: “List of opened tasks” → so in Greek must use plural). On the other hand, the same message in task’s History uses var taskopened=”Task opened”. Maybe it would be best if var taskopened was used in Event log too instead of var opened. It would solve my problem.
closedClosed (same as above)
editedEdited (same as above)
2224GreekBug ReportVery LowSemicolon is a bad separatorUnconfirmed
0%
1124.10.201625.10.2016 Task Description

The symbol “;” in Greek is the question mark. So a list of semicolon-separated values looks like a series of questions in Greek. (looks like this: “cat? dog? rabbit?” ;-))

I suggest replacing semicolons with commas as list separators.

In email lists space is good choice too.

2305GreekFeature RequestVery LowMonth names not translatableUnconfirmed
0%
2126.10.201611.03.2019 Task Description

At first I thought month names were controled by jscalendar. But after restoring functionality of jscalendar ( FS#2226 ) I realized that month names are probably a native feature of Flyspray.

So month names need translation. Moreover, in Greek there should be grammatical cases used. For example October in Greek is Οκτώβριος (nominative case). But when you say “October 2” in Greek is “2 Οκτωβρίου” (genitive case). So month translation would require at least two strings for each month.

1882EmailBug ReportMediumError with email notificationPlanned
0%
2.0622.12.201308.04.2016 Task Description

Hello,

First of all, thanks for this great tool, very user friendly.
I'm informing you as requested ("This should never happend, please inform Flyspray Developers" :)) because I'm getting this error message:

[Completely unexpected exception: Connection could not be established with host http://ssl0.ovh.net/ [php_network_getaddresses: getaddrinfo failed: Name or service not known #0]
This should never happend, please inform Flyspray Developers]

I set up the SMTP configuration (SSL) with information provided.

Enclosed in PHPinfo configuration, if it helps.

Thanks

2071EmailBug ReportLowNew user e-mail validationConfirmed
0%
14.10.201514.10.2015 Task Description

On flyspray/index.php?do=admin&area=newuser I sucessfuly register user with email ;

I don’t recieve popup with message ‘You did’nt enter valid e-mail address’

After that on new page i receive error:

Completely unexpected exception: Address in mailbox given [;] does not comply with RFC 2822, 3.6.2.
This should never happend, please inform Flyspray Developers

2094EmailBug ReportHighAfter Upgrade All Users Receive Notifications for All T...Unconfirmed
0%
4106.01.201613.01.2016 Task Description

I upgraded from 0.9.9 to 1.0-beta2 a few hours ago. I received an error about oauth during the upgrade (didn’t think to take a screenshot). In any case, the upgrade otherwise seemed to go smoothly. When I subsequently closed a few tasks people who weren’t assigned to receive notifications for those tasks, even old consultants whose account I had disabled years ago, received the email notification. I also received lots of bounced emails from accounts whose email addresses were no longer existant.

Has anyone else experienced this? I’ve gone into the database and null’d out the email addresses of old accounts to prevent further spam. Not only did it notify everyone who had an account (active or disabled) but it put their email address in the To: field for all to see.

2116EmailBug ReportMediumError with email notificationUnconfirmed
0%
1908.04.201615.04.2016 Task Description

I have a major problem. At the first I thought that problem is on my server - Windows OS, IIS. But now when I have second bug tracker site on Apache server and error is the same I know that this is not server error but bug tracker error.

How can I help that we resolve this problem?

If e-mail need’s to be sent I got blank white page and nothing happens.

In attachment is my bug tracker with installer (setup) folder. If this somehow helps it?

Version which is used is 1.0 (latest on web) (edit by peterdd: was a mix of older Flyspray versions). The problem is that nothing works because e-mails are not working..

2339EmailInformationLowEmailing issuesUnconfirmed
0%
110.02.201710.02.2017 Task Description

Sometimes the emailing fails for a while with the message:

Completely unexpected exception: Expected response code 250 but got code “550”, with message “550 Bad HELO - Host impersonating domain name [mysite.nl] "
This should never happend, please inform Flyspray Developers

It useually simply works so actually I don’t know if it’s a flyspray issue or a hosting issue...

2343EmailBug ReportMediumNotification mailUnconfirmed
0%
214.02.201715.02.2017 Task Description

Good Morning,

I have this message error when I want configure SMTP Server :
Completely unexpected exception: Connection could not be established with host 192.168.0.10 [Permission denied #13]
This should never happend, please inform Flyspray Developers

My flyspray installs on CentOS v7. Postfix installs on the server but I don’t configure anymore.

Can you help me please

Julia LECLERC

2496EmailBug ReportLowNotification Mail - Link to the task invalid when quick...Waiting on Customer
0%
213.09.201814.09.2018 Task Description

Hello,

I’m having an issue on the notification’s mail sent to people when quick-editing a task, more precisely on the link to the task below.

I had this in my older mails :
mybugtracker.com/js/callbacks/index.php?do=details&task_id=xxxx

I “corrected” it by adding a str_replace here (see my screenshot), and now it’s good.

Thank you

2521EmailInformationLowTLS email with self-signed certificate doesn't work, "C...Unconfirmed
0%
531.10.201803.11.2018 Task Description

I use a personal email server with a self-signed certificate (i’m not sure if it’s possible to use my https certificate for that? i don’t even kind of understand what all I did to get this email server setup, and I don’t really want to mess with it... especially since my https certificate comes from Let’s Encrypt... so i might have to muck with the email server every 60 days ... not sure?) ..

anyway, when I try to connect to it with Flyspray, I get above the Test Email button, “Completely unexpected exception: Unable to connect with TLS encryption
This should never happend, please inform Flyspray Developers”

Most systems have a way to override and accept an invalid cert, but I’m not seeing anything obvious about doing that with Flyspray. Does a function for this already exist, or do we need a way to do that? (alternatively, I would accept help in properly configuring my email lol)

2524EmailInformationLowSMTP Mailer doesn't accept custom portsUnconfirmed
0%
05.11.201827.11.2018 Task Description

Did you installed an official release or did you used an inoffical docker?!
Yeah
MySQL 8.0.12, 7.2.9 on debian buster

Steps done to create the problem:
Enter server:port at Mail-Settings

Expected behavior:
smtp.example.com:customport would make use of the custom port

Experienced behavior:
TLS Errors

          if ($fs->prefs['email_tls']) {
              $swiftconn = Swift_SmtpTransport::newInstance($fs->prefs['smtp_server'], 587, 'tls');
          } else if ($fs->prefs['email_ssl']) {
              $swiftconn = Swift_SmtpTransport::newInstance($fs->prefs['smtp_server'], 465, 'ssl');
          } else {
              $swiftconn = Swift_SmtpTransport::newInstance($fs->prefs['smtp_server']);
          }

Should be changed to

          $someTemporaryVariable = explode(':',$fs->prefs['smtp_server']);
          if ($fs->prefs['email_tls']) {
              $swiftconn = Swift_SmtpTransport::newInstance($someTemporaryVariable[0], $someTemporaryVariable[1] || 587, 'tls');
          } else if ($fs->prefs['email_ssl']) {
              $swiftconn = Swift_SmtpTransport::newInstance($someTemporaryVariable[0], $someTemporaryVariable[1] || 465, 'ssl');
          } else {
              $swiftconn = Swift_SmtpTransport::newInstance($someTemporaryVariable[0], $someTemporaryVariable[1] || 25);
          }
2544EmailBug ReportLowError when registering new accountUnconfirmed
0%
123.03.201923.03.2019 Task Description

I installed the developer edition.

mysql Ver 14.14 Distrib 5.7.25, for Linux
PHP 7.2.15-0ubuntu0.18.04.1
Ubuntu 18.04.2

Admin settings → Allow users to register and send conf. email.

I DID set up email settings thru google and sent a test email. it did work.

After logging out, I tried to register a new account. I filled in details and got the following error:
Completely unexpected exception: Expected response code 250 but got code “530”, with message “530 5.7.0 Must issue a STARTTLS command first. u13sm3937813iog.80 - gsmtp "
This should never happend, please inform Flyspray Developers

Obviously, the confirmation email was never sent.

I am going to try to manually add a new user. Will update with outcome.

2550EmailBug ReportLowException handling sending email notificationUnconfirmed
0%
06.05.201906.05.2019 Task Description

Someone reported this:

Today i tried to report an issue about xxx on the xxx (namely xxx) and the following error message has been displayed:
Completely unexpected exception: Expected response code 250 but got code “451”, with message “451 Error in writing spool file "
This should never happend, please inform Flyspray Developers
The issue itself has been created though.
2552EmailBug ReportHighEmail TLS error (was 'Mail Adress encryption')Unconfirmed
0%
130.05.201931.05.2019 Task Description

Official release

Steps done to create the problem:
Insert correct (tested with gmail) data into the notification tab and click on “Test”

SSL and TLS are checked.

Expected behavior:
Send test email and confirm it.

Experienced behavior:
Following error message

Error message:
Warning: stream_socket_enable_crypto(): Peer certificate CN=`*.netcup.net’ did not match expected CN=`mail*.netcup.net’ in /var/www/vhosts/.netcup.net/httpdocs/**/flyspray/vendor/swiftmailer/swiftmailer/lib/classes/Swift/Transport/StreamBuffer.php on line 103 Completely unexpected exception: Unable to connect with TLS encryption
This should never happend, please inform Flyspray Developers

1964DocumentationFeature RequestLowOn page documentationNew
0%
11.03.201511.03.2015 Task Description

This is a parent task for all small helping or explaining tooltips that can be maybe added where approriate.

Many people don't like reading external documentations, which sometimes often is also not up to date with the current used version.

If you are doing something in Flyspray and you don't know exactly how it works or have to be done rigth and you must look at documentation, it breaks your workflow.

The best case is if its all perfect intuitive and you don't have to read any help texts. But in the case of more complex operations or things that do many things behind the scene a helping tooltip or explanation can give you a mental map and more trust into what the tool is doing.

2337DocumentationInformationLowFlyspray ThemesNew
0%
402.02.201716.02.2017 Task Description
  • Flyspray 1.0 includes 1 default theme CleanFS. That decision was made to reduce maintainance effort and the old blue theme was dropped. Also the CleanFS contains UI-logic implemented in HTML/CSS and tries to be usable even for the people who turned off javascript in their web browsers for security reasons. (and reduces spam on many other websites too without an adblocker)
  • Current Flyspray source and the theme CleanFS provides several methods to customize the layout without touching the .tpl files. These are:
    1. custom_*.css files that extend or overwrite properties of CleanFS/theme.css
    2. 2 fields in admin area where to put code
      ?do=admin&area=prefs#lookandfeel

      For instance a corporate footer menu or something like that.

Advantages of CleanFS instead running your own

  • Theme is maintained with Flyspray source. Detected security issues related with themes are fixed with Flyspray releases.
  • Added features or capabilities are implemented for the default theme.

‘Subtheme’ can be a compromise: Theme CleanFS is always uptodate in sync with Flyspray. Subthemer only needs to check changes required for own subtheme .tpl files.

I do not want complete stop people from writing their whole new template, it allows new ideas implemented or alternative usability. For them, it is probably better to create a Github project for that theme.

This is just raw info from me and can be discussed. Something should be finally written on https://www.flyspray.org in the documentation area.

2568DocumentationBug ReportMedium[MANUAL] a missing image in "Understanding Permissions:...Unconfirmed
0%
101.09.201902.09.2019 Task Description

In the page http://www.flyspray.org/manual/group_permissions/ , it is written

Shown is an image of the permissions page for the Flyspray project’s Contributors group

but there is no image in there.

I can think of two ways of dealing with that I guess:

  1. add an image
  2. remove the sentence

What do you think?

1748Database QueriesFeature RequestLowSort by recent activityPlanned
0%
1.1 devel717.06.201211.03.2015 Task Description

It would be great to sort the task list by recent activity. This would mean any change to an issue, including new comments, would rise to the top. This would make it easy to keep up on recent discussion even if you don't want to get every single detail via notifications.

1985Database QueriesFeature RequestVery LowFor developers - testing with huge flyspray data setsNew
0%
224.03.201516.03.2016 Task Description

Here I will put some sql examples for the current developers to have a base for testings:

Starting with a default installation with its 1 example project and 1 example task:

I hope we can put all this into valuable phpunit tests for automatic testing with travis-ci.

Still TODO, do not use:
After fresh Flyspray install, add some more projects:

INSERT INTO flyspray_projects (project_title,project_is_active,others_view,anon_open) VALUES('Inactive Project', 0, 1, 1);
INSERT INTO flyspray_projects (project_title,project_is_active,others_view,anon_open) VALUES('Active Project Anonymous Reporting', 1, 1, 1);
INSERT INTO flyspray_projects (project_title,project_is_active,others_view,anon_open) VALUES('Deleted Project', 1, 1, 1);
DELETE FROM flyspray_projects WHERE project_title LIKE 'Deleted Project'; -- delete to have an id gap
INSERT INTO flyspray_projects (project_title,project_is_active,others_view,anon_open) VALUES('Active Project NO Others View', 1, 0, 0);
-- There should now be 4 projects with ids (1,2,3,5).
-- Now lets add some extra roles for a few projects
INSERT INTO flyspray_groups (group_name,project_id,manage_project,view_tasks,open_new_tasks,modify_own_tasks,view_own_tasks,view_groups_tasks) VALUES('Project3 Manager', 3, 1, 1, 1, 1, 1, 1 );
INSERT INTO flyspray_groups (group_name,project_id,manage_project,view_tasks,open_new_tasks,modify_own_tasks,view_own_tasks,view_groups_tasks) VALUES('Project3 Reporter', 3, 0, 1, 0, 1, 1, 1 );
INSERT INTO flyspray_groups (group_name,project_id,manage_project,view_tasks,open_new_tasks,modify_own_tasks,view_own_tasks,view_groups_tasks) VALUES('Project5 Developer', 5, 0, 1, 1, 1, 1, 1 );
-- TODO
-- Then create some more users:
INSERT INTO flyspray_users(user_name,real_name,email_address,account_enabled,tasks_perpage,lang_code) VALUES('tester1','T1Developer','tester1@example.com',1,100,'en');
INSERT INTO flyspray_users(user_name,real_name,email_address,account_enabled,tasks_perpage,lang_code) VALUES('tester2','T2Reporter_P3Manager','tester2@example.com',1,100,'de');
INSERT INTO flyspray_users(user_name,real_name,email_address,account_enabled,tasks_perpage,lang_code) VALUES('tester3','T3Basic_P3Reporter_P5Developer','tester3@example.com',1,100,'fr');
-- And put them into a global group and a few into project roles too:
INSERT INTO flyspray_users_in_groups(user_id,group_id) VALUES(2,2);
INSERT INTO flyspray_users_in_groups(user_id,group_id) VALUES(3,3);
INSERT INTO flyspray_users_in_groups(user_id,group_id) VALUES(3,8);
INSERT INTO flyspray_users_in_groups(user_id,group_id) VALUES(4,4);
INSERT INTO flyspray_users_in_groups(user_id,group_id) VALUES(4,9);
INSERT INTO flyspray_users_in_groups(user_id,group_id) VALUES(4,10);
-- And lets fill the Database with 10 different configured task to simulate different cases:
INSERT INTO flyspray_tasks(project_id,task_type,item_status,supertask_id) VALUES(1,1,1,0); -- id2 in first project
INSERT INTO flyspray_tasks(project_id,task_type,item_status,supertask_id) VALUES(2,1,1,0); -- id3 in inactive project
INSERT INTO flyspray_tasks(project_id,task_type,item_status,supertask_id) VALUES(2,1,1,3); -- id4 in inactive project
INSERT INTO flyspray_tasks(project_id,task_type,item_status,supertask_id) VALUES(3,1,0,6); -- id5 status 0,supertask_id6
INSERT INTO flyspray_tasks(project_id,task_type,item_status,supertask_id) VALUES(3,1,0,0); -- id6
INSERT INTO flyspray_tasks(project_id,task_type,item_status,supertask_id) VALUES(3,1,1,6); -- id7
INSERT INTO flyspray_tasks(project_id,task_type,item_status,supertask_id) VALUES(5,1,1,0); -- id8
INSERT INTO flyspray_tasks(project_id,task_type,item_status,supertask_id) VALUES(5,1,1,8); -- id9
INSERT INTO flyspray_tasks(project_id,task_type,item_status,supertask_id) VALUES(5,1,1,9); -- id10
-- TODO
-- And now lets fill the database with many task referencing the 10 base tasks (10k or more rows) by repeating the following until enough (grows exponential x**2 !
INSERT INTO flyspray_tasks (project_id,task_type,item_status, supertask_id, item_summary) SELECT 3,1,1,FLOOR(RAND()*11),RAND() FROM flyspray_tasks;

These Examples can be used for finding bottle necks or problems on huge installations.


	
2014Database QueriesFeature RequestVery LowAdd MS SQL Server as database backendMaybe
0%
2120.07.201530.07.2015
2304Database QueriesBug ReportMediumGreek letters crash tagsConfirmed
0%
126.10.201626.10.2016
2432Database QueriesInformationLowDelete tasks from all projects (like factory reset)Unconfirmed
0%
208.05.201710.05.2017
407Backend/CoreFeature RequestMediumPlugin systemConfirmed
0%
2.0261404.12.200417.01.2013
1222Backend/CoreFeature RequestMediumWorkflow engine / Role-based State Transition Rules Eng...Unconfirmed
0%
11625.03.200705.05.2019
1237Backend/CoreFeature RequestMediumAllow Multiple Owners Per CategoryPlanned
0%
2.04709.04.200710.08.2015
1521Backend/CoreFeature RequestLowAssignees should be able to see and create reminders fo...Unconfirmed
0%
22.11.200818.04.2009
1529Backend/CoreBug ReportLowInactivity-close doesn't work, bug is left openMaybe
0%
2.0207.01.200924.09.2015
1539Backend/CoreFeature RequestLowSitemap.xml GenerationUnconfirmed
0%
2.12112.01.200911.03.2015
1612Backend/CoreFeature RequestLowAllow Comments by anonymous UsersUnconfirmed
0%
2.02120.10.200917.01.2013
1720Backend/CoreFeature RequestLowBetter Access Control Lists and User / Group ManagementPlanned
0%
1.1 devel301.05.201220.03.2015
1734Backend/CoreBug ReportLowAdd Timezone Selection to Admin PanelMaybe
0%
2.0112.05.201207.03.2015
1753Backend/CoreFeature RequestMediumUsergroup Restriction: Only View SummaryConfirmed
0%
1.1 devel4220.06.201227.06.2016
1760Backend/CoreFeature RequestLowColumn 'last commenter' in tasks list viewMaybe
0%
2.01227.07.201225.10.2016
1766Backend/CoreFeature RequestLowAllow users to choose their favourite themePlanned
0%
2.01116.08.201204.08.2015
1772Backend/CoreFeature RequestLowDifferent kinds of votesMaybe
0%
2.01123.09.201209.03.2015
1774Backend/CoreFeature RequestLowEmail LayoutMaybe
0%
2.011.10.201220.07.2015
1782Backend/CoreFeature RequestLowCustom fields on taskPlanned
0%
2.030327.11.201228.04.2016
1792Backend/CoreFeature RequestLowChanges from Deprecated 1.0.0New
0%
2.113.12.201203.03.2013
1798Backend/CoreFeature RequestLowBounty System New
0%
2.0113.12.201206.03.2015
1811Backend/CoreFeature RequestLowGoogle Docs/Dropbox IntegrationNew
0%
2.0417.01.201313.03.2015
1818Backend/CoreFeature RequestLowGit/SVN/CVS IntegrationPlanned
0%
2.05217.01.201312.08.2015
1819Backend/CoreFeature RequestLowCommunicate via emailPlanned
0%
2.08317.01.201318.10.2016
1820Backend/CoreFeature RequestLowMerge comments, history, and detailsNew
0%
2.0317.01.201325.05.2016
1823Backend/CoreFeature RequestLowComments with edit changesPlanned
0%
2.0230.01.201306.03.2015
Showing tasks 151 - 200 of 303 Page 4 of 7

Available keyboard shortcuts

Tasklist

Task Details

Task Editing