Flyspray

If you are reporting a bug please provide as much information as possible to help understand and reproduce the problem:

Did you installed an official release or did you used an inoffical docker?!

database type and version, php version and OS version/linux distribution flavour, global or project settings you used that could be relevant for reproducing the problem

Steps done to create the problem: Deleate a Task

Expected behavior: Send a email

Experienced behavior:
Completely unexpected exception: Connection could not be established with host smtp.gmail.com [Connection timed out #110]
This should never happend, please inform Flyspray Developers

The last build is very old, it is possible to create a new build?
- The last RC: 2 years soon
- The last stable: 9 years soon

GitHub Releases section:
- https://github.com/Flyspray/flyspray/releases

Latest release
v1.0-rc9
136c339

Flyspray 1.0-rc9

@peterdd peterdd released this Apr 22, 2019

Stable: http://www.flyspray.org/docs/download/

Flyspray 0.9.9.7 - 28 May 2012

Regardless if a gmail.com or other address (tested with my gmail and also other email address)

So this is probably a mail server problem. I try to reach server admin.

I can see my “unfinished registrations” tests in the admin→checks area, but received no emails (waited and checking spam folders too)

After updating from “1.0-rc6” to “1.0-rc7 dev” there is missing controls menu on writer. Look attachment.
How to solve this?

Is there any settings to enable this or I’m missing something...

The application installer needs an overhaul, all strict notices fixed and the associated dependant tasks resolved.

“Oh, there are some incompatible properties set that must be resolved before moving this task to a different project.”

Oh, but I am not moving the task to a different project. Just trying to edit my own submission.

“Edit this task” → “Save details”

See attached screen capture.

I administer a moderate-sized (~14K ticket) 1.0-rc9 instance running on a Fedora 32 host (php 7.4.16, mariadb 10.4.18) Following the upgrade instructions (ie transfer attachments, avatars, flyspray.conf.php) the setup/upgrade tool loads, and prompts me to upgrade.

It churns a while before refreshing the screen, claiming a successful 1.0-rc10 upgrade. However, the upgrade seems to not actually “stick”, because clicking on the “return” button I’m dropped back into the upgrader, which is once again claiming I’m running 1.0-rc9 and prompting me to perform the -rc10 upgrade.

According to Flyspray’s admin ‘checks’ tab:

* PHP 7.4.16
* MariaDB 10.4.18
* default_charset: utf8mb4
* default_collation: utf8mb4_unicode_ci
* All tables are ‘InnoDB’

There are no errors logged that I can find, but the upgrade is clearly not working. If I revert to the -rc9 php files, everything continues along as if nothing was done.

Any suggestions?

I administer a small personal (<1K ticket) 1.0-rc9 instance running on a Fedora 32 host (php 7.4.16, postgresql 12.6) Following the upgrade instructions (ie transfer attachments, avatars, flyspray.conf.php) the setup/upgrade tool loads, and prompts me to upgrade.

Unfortunately, the upgrade fails spectacularly, with a reported SQL error that belies what’s actually wrong. Here’s a snippet from the postgresql logs where the upgrade is failing:

2021-04-28 10:33:07.190 EDT [2032049] ERROR: column “attachment_id” of relation “flyspray_attachments” already exists
2021-04-28 10:33:07.190 EDT [2032049] STATEMENT: ALTER TABLE flyspray_attachments ADD COLUMN attachment_id SERIAL
2021-04-28 10:33:07.194 EDT [2032049] ERROR: current transaction is aborted, commands ignored until end of transaction block
2021-04-28 10:33:07.194 EDT [2032049] STATEMENT: ALTER TABLE flyspray_attachments ADD COLUMN task_id INTEGER
[…and everything else fails because the transaction aborted…]

It appears that the upgrade script is blindly trying to create columns that already exist in the -rc9 database, and postgresql is treating this as a failure. Because the entire upgrade happens within one transaction, this means the entire upgrade fails at the outset and won’t ever succeed.

The way past this specific problem is to make these ALTER TABLE operations conditional (eg “ALTER TABLE flyspray_attachments ADD COLUMN IF NOT EXISTS task_id INTEGER”).

danoh on github wants to work on patch. Couldn’t find him here..

After I upgraded to version 1.0 (the upgrade was successful), flyspray only shows a white page (and the source in firefox shows, that the page is completely white).

Please help us finding the roots of these bugs!

Please report what you were exactly doing before this happend, report us your steps made, the used php version, used OS version, and such information.

make a option in configuration file

me need set same $db1→set_charset(’utf8mb4’); for my MySQLi

have a problem with national letters

I see this error after i try enter national letters to the summary input text field for create new task

Query {UPDATE `flyspray_tasks` SET project_id = ?, task_type = ?, item_summary = ?, detailed_desc = ?, item_status = ?,
 mark_private = ?, product_category = ?, closedby_version = ?, operating_system = ?, task_severity = ?, task_priority = ?, 
last_edited_by = ?, last_edited_time = ?, due_date = ?, percent_complete = ?, product_version = ?, estimated_effort = ?
 WHERE task_id = ?} 
with params {1,1,тестовая задача,<p>sdfsdfdsfsd</p> ,2,0,4,0,1,2,4,1,1441344777,0,0,1,0,2} Failed!
(Incorrect string value: '\xD1\x82\xD0\xB5\xD1\x81...' for column 'item_summary' at row 1)

Summary of TODO I found on the net:

• There is a very old project site of flyspray on sf.net . The info there should be updated or removed.

• Update info and keep an eye on http://alternativeto.net/software/flyspray/ from time to time.

• Keep an eye and update Flyspray info on wikipedia for example:
  • http://en.wikipedia.org/wiki/Bug_tracking_system
  • http://en.wikipedia.org/wiki/Comparison_of_issue-tracking_systems
  • http://en.wikipedia.org/wiki/Comparison_of_project_management_software
  • http://en.wikipedia.org/wiki/Comparison_of_help_desk_issue_tracking_software
  • http://de.wikipedia.org/wiki/Issue-Tracking-System

Hi,

I can’t see the Editor when I make new task. Also when I editing a exciting task.

See nothing to put any HTML code in it. Can you help me!?

I use this version: Flyspray 0.9.9.7

I upgraded from 0.9.9 to 1.0-beta2 a few hours ago. I received an error about oauth during the upgrade (didn’t think to take a screenshot). In any case, the upgrade otherwise seemed to go smoothly. When I subsequently closed a few tasks people who weren’t assigned to receive notifications for those tasks, even old consultants whose account I had disabled years ago, received the email notification. I also received lots of bounced emails from accounts whose email addresses were no longer existant.

Has anyone else experienced this? I’ve gone into the database and null’d out the email addresses of old accounts to prevent further spam. Not only did it notify everyone who had an account (active or disabled) but it put their email address in the To: field for all to see.

Moving task to another project seems to require fields updated to target project options. This operation is not possible on the task category field and possibly others. Attempting to submit changes gives error:

“Oh, there are some incompatible properties set that must be resolved before moving this task to a different project.”

However, you cannot select a new value (from the target list) for the properties in question.

Flyspray does not recover the time set in php.ini. On display, the system has two hour delay.

Fatal error: Class 'League\OAuth2\Client\Provider\Github' not found in /html/bugs/includes/GithubProvider.php on line 11

I have downloaded this:
Precompiled with 3rd party libs for PHP5.6: flyspray-1.0-rc1_php56.tgz
and the file seems really dont exist.

I tried to upgrade from 0.9.9.7 to 1-0-rc1 but I end in an infinite redirection loop

I tried to use the github version, to change the domain name (hosted in dreamhost), to use/not-use the .htaccess, upgraded the version of php from 5.5 to 5.6, to change all the settings in the flyspray.conf.php file, but still having the error after to perform the Upgrade task and removing the setup dir

Used the prepacked dependencies since i cannot install them in this server

Thanks
Thanatermesis

When a anonymous user tries to display a ticket of a non public project (for example by entering a random ticket id), Flyspray exposes the title of the non public project in the header bar.

Edit by peterdd: also applies to project description

The issue with many servers now and the reason that recaptcha does not work is because it requires servers to enable allow_url_fopen which is a huge security risk. That is why you get the warning message when you try to run recaptcha that file_get_contents failed to connect.

So the solution is to use Curl to do that job.

Here is the fixed file, excuse my mess i had not cleaned up my code yet... but recaptcha now works.

this file goes in the includes dir... you can clean up the file if you like again sorry about that.

Official release

Steps done to create the problem:
Insert correct (tested with gmail) data into the notification tab and click on “Test”

SSL and TLS are checked.

Expected behavior:
Send test email and confirm it.

Experienced behavior:
Following error message

Error message:
Warning: stream_socket_enable_crypto(): Peer certificate CN=`*.netcup.net’ did not match expected CN=`mail*.netcup.net’ in /var/www/vhosts/.netcup.net/httpdocs/**/flyspray/vendor/swiftmailer/swiftmailer/lib/classes/Swift/Transport/StreamBuffer.php on line 103 Completely unexpected exception: Unable to connect with TLS encryption
This should never happend, please inform Flyspray Developers

Problem: https://github.com/Flyspray/flyspray/pull/552

The button ‘My assigned tasks’ should search only by userid, not in username or realname with the LIKE ‘%...%’ operator.

Currently the button is using the same as doing an advanced search filling the ‘Assigned To’ input field. (currently ‘dev’ param) But that search param searches in userid, username and realname.

Edit: Implemented simpler solution: if param is digitsonly, then search by userid, otherwise by username and realname if that param exists.

Tags can only be added on the “new task” page, not managed on the “edit task”-page. done

• The information when a tag is added or removed and by whom logged through flyspray_history table is still TODO.
• The information when a tag is added by whom is visible when hovering over it in the task details view
• Tags are now also searched by the submitted search string when doing a task search.
• In addition to the project level ‘free tagging’ which allows users create new tag names there exists also a use_tags permission per project. This is currently only used on some of the appropriate locations.

Integrate the selectpure javascript to the new task and edit task form.

By default there is a text field where tag names are separated by ‘;’ character.

Selectpure could instead show the tags with their visual layout with a little ‘x’ inside on the right side for removing a tag and autocomplete when typing a tag name to show existing tags from the flyspray_list_tag-table as possible selections.

Instead implemented a CSS and raw javascript solution with a single taghelper.js without any dependancies.

A button beside the tag input text field toggles a list of available tags for the current task, depending on the project and settings.

Still TODO

For example, say I no longer want 1.1, 0.9.9.8, 1.0.0, etc. So want to merge them all into one version 1.0. Same goes for OS, and others