Flyspray

I have the last version rc10

When I try to update/delete a item from a list in “Categories” I have this message in the top of the page:

http://XXXXX/index.php?do=pm&area=cat&project=2

Warning: Invalid argument supplied for foreach() in /var/www/html/includes/modify.inc.php on line 2215

When I try to update/delete a item from a list in “Versions” I have this message in the top of the page:

http://XXXX/index.php?do=pm&area=version&project=2

Warning: Invalid argument supplied for foreach() in /var/www/html/includes/modify.inc.php on line 2119 

http://XXXX/index.php?do=admin&area=cat

Warning: Invalid argument supplied for foreach() in /var/www/html/includes/modify.inc.php on line 2215

My project has 37 pending requests. Each has a set of Accept / Deny buttons next to it.

If I click on Deny, a textbox pops up for me to enter “Reason for denial” but the entire page immediately regreshes/reloads back to the task list before I have a chance to enter the reason and submit it.

I can always “Accept” the request implicitly by going to the appropriate task and closing/re-opening it, but there’s no way to “deny” something without going through this UI path.

I administer a small personal (<1K ticket) 1.0-rc9 instance running on a Fedora 32 host (php 7.4.16, postgresql 12.6) Following the upgrade instructions (ie transfer attachments, avatars, flyspray.conf.php) the setup/upgrade tool loads, and prompts me to upgrade.

Unfortunately, the upgrade fails spectacularly, with a reported SQL error that belies what’s actually wrong. Here’s a snippet from the postgresql logs where the upgrade is failing:

2021-04-28 10:33:07.190 EDT [2032049] ERROR: column “attachment_id” of relation “flyspray_attachments” already exists
2021-04-28 10:33:07.190 EDT [2032049] STATEMENT: ALTER TABLE flyspray_attachments ADD COLUMN attachment_id SERIAL
2021-04-28 10:33:07.194 EDT [2032049] ERROR: current transaction is aborted, commands ignored until end of transaction block
2021-04-28 10:33:07.194 EDT [2032049] STATEMENT: ALTER TABLE flyspray_attachments ADD COLUMN task_id INTEGER
[…and everything else fails because the transaction aborted…]

It appears that the upgrade script is blindly trying to create columns that already exist in the -rc9 database, and postgresql is treating this as a failure. Because the entire upgrade happens within one transaction, this means the entire upgrade fails at the outset and won’t ever succeed.

The way past this specific problem is to make these ALTER TABLE operations conditional (eg “ALTER TABLE flyspray_attachments ADD COLUMN IF NOT EXISTS task_id INTEGER”).

I administer a moderate-sized (~14K ticket) 1.0-rc9 instance running on a Fedora 32 host (php 7.4.16, mariadb 10.4.18) Following the upgrade instructions (ie transfer attachments, avatars, flyspray.conf.php) the setup/upgrade tool loads, and prompts me to upgrade.

It churns a while before refreshing the screen, claiming a successful 1.0-rc10 upgrade. However, the upgrade seems to not actually “stick”, because clicking on the “return” button I’m dropped back into the upgrader, which is once again claiming I’m running 1.0-rc9 and prompting me to perform the -rc10 upgrade.

According to Flyspray’s admin ‘checks’ tab:

* PHP 7.4.16
* MariaDB 10.4.18
* default_charset: utf8mb4
* default_collation: utf8mb4_unicode_ci
* All tables are ‘InnoDB’

There are no errors logged that I can find, but the upgrade is clearly not working. If I revert to the -rc9 php files, everything continues along as if nothing was done.

Any suggestions?

There should be only one request to

js/callbacks/gethistory.php when activating the History tab

The request is made:

• on mousedown event
• on click event

So holding down the tab sends the first request and releasing sends the second request.

FS version: 1.0-rc9
PHP version: 7.4.15
database: mysql
php.ini: error_reporting = E_ALL | E_STRICT

Steps done to create the problem:
- Login as Admin or User, with name “Admin”, not with email.

Experienced behavior:
PHP Notice: Trying to access array offset on value of type bool in …/flyspray-1.0-rc9/includes/class.flyspray.php on line 812

A possible fix is attached as patch.

Think, it is this line in currend code:
https://github.com/Flyspray/flyspray/blob/5b0a3d80fc9612ca8e8743450fbf2c8243b5bf47/includes/class.flyspray.php#L836

The last build is very old, it is possible to create a new build?
- The last RC: 2 years soon
- The last stable: 9 years soon

GitHub Releases section:
- https://github.com/Flyspray/flyspray/releases

Latest release
v1.0-rc9
136c339

Flyspray 1.0-rc9

@peterdd peterdd released this Apr 22, 2019

Stable: http://www.flyspray.org/docs/download/

Flyspray 0.9.9.7 - 28 May 2012

An incorrect email configuration may cause flyspray to hung during several seconds and report an exception.

Environment

* Linux Debian 10
* Nginx
* PHP-7.3 FPM
* Mariadb 10.3
* Flyspray 1.0-rc9

Steps done to create the problem:

1. Cause a misconfiguration in the email configuration (e.g. an email server rejecting the user authentication)
2. Try to post a comment on a ticket to generate a notification

Expected behavior:

Report the error in a logfile and gently show a user-friendly notification

Experienced behavior:

Flyspray hungs during several seconds and reports a user-unfriendly error:
The exception occurs in conditions that generate email notifications (e.g. posting a comment on a ticket):

Notice: fwrite(): send of 6 bytes failed with errno=104 Connection reset by peer in /var/www/flyspray/vendor/swiftmailer/swiftmailer/lib/classes/Swift/Transport/StreamBuffer.php on line 240 Completely unexpected exception: Expected response code 250 but got code "421", with message "XXX edited XXX"
This should never happend, please inform Flyspray Developers

If you are reporting a bug please provide as much information as possible to help understand and reproduce the problem:

Did you installed an official release or did you used an inoffical docker?!

database type and version, php version and OS version/linux distribution flavour, global or project settings you used that could be relevant for reproducing the problem

Steps done to create the problem: Deleate a Task

Expected behavior: Send a email

Experienced behavior:
Completely unexpected exception: Connection could not be established with host smtp.gmail.com [Connection timed out #110]
This should never happend, please inform Flyspray Developers

I tried to register a user test3, and in my flyspray Installation the adminstratior disabled the notifications.
So I could only select “None” as text next to “Notifications”. After I pressed the button “Send Code!”, I received the email with the confirmation code. I clicked on the link in the email, and on the appearing website I entered the confirmation code and password and pressed the button “Register this account”.

Then I got the next e-mail message.
This message begins with:

“You have registered at Flyspray. Your details are as follows:”

This e-mail ends with the sentences:

“You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don’t want to receive mails in future, you can change your notification settings at the URL shown above.”

But this is not true. I have not requested this email. I as user test3 cannot change the notification settings because the notifications are disabled by the administrator.

From: https://groups.google.com/forum/?hl=en#!topic/flyspray/jC5BBQ1XiQo

19-04-09 // More one year ago.

On https://www.flyspray.org/ On https://www.flyspray.org/devel/team/

Replace :
- https://www.psi-im.org/ → https://psi-im.org/

→ Remove the WWW.

Trying to add a new user having the same email address as an another user in the do=admin&area=newuser section results in

“That username is already taken. You will need to choose another one.”

instead of

“Email address has already been taken”

(I’ve stumbled on this issue because I have an older disabled user with the same email address)

Hello,

When registering and when later editing users settings it’s possible to specify “Time zone” but the way it’s implemented is confusing. What I see is a drop-down list with GMT[+-]:digit: and this is an odd way to set the timezone for multiple reasons:

1. “GMT” is a word without universally accepted and defined meaning these days, see https://www.ucolick.org/~sla/leapsecs/timescales.html#GMT ;

2. Often time zone specification needs to include the rules when (if ever) to apply DST and what abbreviation is to be used in different cases. See TZ description on https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap08.html#tag_08_03 .

Taking these two points into account I can’t see how to meaningfully use this feature.

TIA for looking into it.

Sometimes comes this message with a lot of backtrace log.
If you are reporting a bug please provide as much information as possible to help understand and reproduce the problem:

Did you installed an official release or did you used an inoffical docker?!
Official download flyspray-1.0-rc9

mysqlnd 5.0.12-dev
Linux 64bit
PHP Version 7.2.25

Steps done to create the problem:
Wait some weeke and edit a ID.

Experienced behavior:

[18-Dec-2019 13:19:41 Europe/Berlin] PHP Notice:  session_start(): ps_files_cleanup_dir: opendir(/tmp/.priv) failed: Permission denied (13) in /var/foo/htdocs/flyspray/includes/class.flyspray.php on line 1006
[18-Dec-2019 13:19:41 Europe/Berlin] PHP Warning:  session_start(): Cannot send session cache limiter - headers already sent (output started at/var/foo/htdocs/flyspray/includes/class.flyspray.php:1006) in /var/foo/htdocs/flyspray/includes/class.flyspray.php on line 1006
[18-Dec-2019 12:19:41 UTC] PHP Warning:  Cannot modify header information - headers already sent by (output started at /var/foo/htdocs/flyspray/includes/class.flyspray.php:1006) in /var/foo/htdocs/flyspray/index.php on line 96
[18-Dec-2019 12:19:41 UTC] PHP Warning:  Cannot modify header information - headers already sent by (output started at /var/foo/htdocs/flyspray/includes/class.flyspray.php:1006) in /var/foo/htdocs/flyspray/index.php on line 97
[18-Dec-2019 12:19:41 UTC] PHP Warning:  Cannot modify header information - headers already sent by (output started at /var/foo/htdocs/flyspray/includes/class.flyspray.php:1006) in /var/foo/htdocs/flyspray/includes/class.csp.php on line 76
[18-Dec-2019 12:19:41 UTC] PHP Warning:  Cannot modify header information - headers already sent by (output started at /var/foo/htdocs/flyspray/includes/class.flyspray.php:1006) in /var/foo/htdocs/flyspray/includes/class.csp.php on line 80
[18-Dec-2019 12:19:41 UTC] PHP Warning:  Cannot modify header information - headers already sent by (output started at /var/foo/htdocs/flyspray/includes/class.flyspray.php:1006) in /var/foo/htdocs/flyspray/includes/class.csp.php on line 82

In the page http://www.flyspray.org/manual/group_permissions/ , it is written

Shown is an image of the permissions page for the Flyspray project’s Contributors group

but there is no image in there.

I can think of two ways of dealing with that I guess:

1. add an image
2. remove the sentence

What do you think?

Closing a task with selected close reason duplicate should warn when there is no comment or FS # id is given in the close comment text field.

The task is closed as duplicate without any further notice. The information to which task it is duplicate or a description (if the problem is logged/handled outside Flyspray) is lost.

Possible solutions

Frontend hints

Backend deny

Official release

Steps done to create the problem:
Insert correct (tested with gmail) data into the notification tab and click on “Test”

SSL and TLS are checked.

Expected behavior:
Send test email and confirm it.

Experienced behavior:
Following error message

Error message:
Warning: stream_socket_enable_crypto(): Peer certificate CN=`*.netcup.net’ did not match expected CN=`mail*.netcup.net’ in /var/www/vhosts/.netcup.net/httpdocs/**/flyspray/vendor/swiftmailer/swiftmailer/lib/classes/Swift/Transport/StreamBuffer.php on line 103 Completely unexpected exception: Unable to connect with TLS encryption
This should never happend, please inform Flyspray Developers

Someone reported this:

Today i tried to report an issue about xxx on the xxx (namely xxx) and the following error message has been displayed:

Completely unexpected exception: Expected response code 250 but got code “451”, with message “451 Error in writing spool file "
This should never happend, please inform Flyspray Developers

The issue itself has been created though.

RC9 running on CentOS LAMP stack

Steps done to create the problem:
Set up google as an oauth provider.
Have a user click “Sign in with Google” in the login box.
User connects their account with Flyspray.
Google redirects the user back to Flyspray
The return screen (on flyspray) asks for a username.

Expected behavior:
No warning about duplicate username should be shown on initial page load since no username was entered yet

Experienced behavior:
A warning about the username being already taken is shown.

It appears there is no logic for showing or hiding that warning in register.oauth.tpl

(It would be great if flyspray was able to just use the email as a username to make the UX even better/simpler.)

I installed the developer edition.

mysql Ver 14.14 Distrib 5.7.25, for Linux
PHP 7.2.15-0ubuntu0.18.04.1
Ubuntu 18.04.2

Admin settings → Allow users to register and send conf. email.

I DID set up email settings thru google and sent a test email. it did work.

After logging out, I tried to register a new account. I filled in details and got the following error:
Completely unexpected exception: Expected response code 250 but got code “530”, with message “530 5.7.0 Must issue a STARTTLS command first. u13sm3937813iog.80 - gsmtp "
This should never happend, please inform Flyspray Developers

Obviously, the confirmation email was never sent.

I am going to try to manually add a new user. Will update with outcome.

Steps done to create the problem:
Visit https://bugs.flyspray.org/index.php?do=register in a private browser window (so you are logged out)

Put in an already taken username (e.g. Stefan or Stefan2)

Expected behavior:
Username gets red and a note appears that username already is taken

Experienced behavior:
Username gets green and registration of a new user proceeds with sending a notification mail with confirmation code.
After putting in the confirmation code in provided page, user gets presented a “username is already taken, choose another” (where?) message, and has to re-start registration process from beginning and hopefully this time choose a not taken name.

Steps done to create the problem:
Access /index.php?do=admin&area=checks with a MySQL Version >= 5.5.3

Expected behavior:
Flyspray tests for character set and displays »Your mysql supports full utf-8 since 5.5.3. You are using x.x.x and flyspray tables could be upgraded.« when database schema or one table isn’t set to utf8mb4 character set.

Experienced behavior:
Flyspray always shows this note, even though character set is correct.

As far as I can tell from the source, a query gets executed to the database (and if I do that manually the result is “utf8mb4, utf8mb4_unicode_ci” for my database), but the result doesn’t get checket, the note is always shown (line 123)

The issue with many servers now and the reason that recaptcha does not work is because it requires servers to enable allow_url_fopen which is a huge security risk. That is why you get the warning message when you try to run recaptcha that file_get_contents failed to connect.

So the solution is to use Curl to do that job.

Here is the fixed file, excuse my mess i had not cleaned up my code yet... but recaptcha now works.

this file goes in the includes dir... you can clean up the file if you like again sorry about that.

When a user has project manager permissions, but not admin permissions, then on the ‘edit group’ pages like index.php?do=pm&area=editgroup&id=8
the links in the list of users of that group are

index.php?do=admin&area=users&user_id=12345

instead of linking to the users page

index.php?do=user&area=users&id=12345

and a redirect follows with Error #4: You don’t have administrative rights.

After updating from “1.0-rc6” to “1.0-rc7 dev” there is missing controls menu on writer. Look attachment.
How to solve this?

Is there any settings to enable this or I’m missing something...