Flyspray

Regardless if a gmail.com or other address (tested with my gmail and also other email address)

So this is probably a mail server problem. I try to reach server admin.

I can see my “unfinished registrations” tests in the admin→checks area, but received no emails (waited and checking spam folders too)

I administer a moderate-sized (~14K ticket) 1.0-rc9 instance running on a Fedora 32 host (php 7.4.16, mariadb 10.4.18) Following the upgrade instructions (ie transfer attachments, avatars, flyspray.conf.php) the setup/upgrade tool loads, and prompts me to upgrade.

It churns a while before refreshing the screen, claiming a successful 1.0-rc10 upgrade. However, the upgrade seems to not actually “stick”, because clicking on the “return” button I’m dropped back into the upgrader, which is once again claiming I’m running 1.0-rc9 and prompting me to perform the -rc10 upgrade.

According to Flyspray’s admin ‘checks’ tab:

* PHP 7.4.16
* MariaDB 10.4.18
* default_charset: utf8mb4
* default_collation: utf8mb4_unicode_ci
* All tables are ‘InnoDB’

There are no errors logged that I can find, but the upgrade is clearly not working. If I revert to the -rc9 php files, everything continues along as if nothing was done.

Any suggestions?

My project has 37 pending requests. Each has a set of Accept / Deny buttons next to it.

If I click on Deny, a textbox pops up for me to enter “Reason for denial” but the entire page immediately regreshes/reloads back to the task list before I have a chance to enter the reason and submit it.

I can always “Accept” the request implicitly by going to the appropriate task and closing/re-opening it, but there’s no way to “deny” something without going through this UI path.

The last build is very old, it is possible to create a new build?
- The last RC: 2 years soon
- The last stable: 9 years soon

GitHub Releases section:
- https://github.com/Flyspray/flyspray/releases

Latest release
v1.0-rc9
136c339

Flyspray 1.0-rc9

@peterdd peterdd released this Apr 22, 2019

Stable: http://www.flyspray.org/docs/download/

Flyspray 0.9.9.7 - 28 May 2012

I administer a small personal (<1K ticket) 1.0-rc9 instance running on a Fedora 32 host (php 7.4.16, postgresql 12.6) Following the upgrade instructions (ie transfer attachments, avatars, flyspray.conf.php) the setup/upgrade tool loads, and prompts me to upgrade.

Unfortunately, the upgrade fails spectacularly, with a reported SQL error that belies what’s actually wrong. Here’s a snippet from the postgresql logs where the upgrade is failing:

2021-04-28 10:33:07.190 EDT [2032049] ERROR: column “attachment_id” of relation “flyspray_attachments” already exists
2021-04-28 10:33:07.190 EDT [2032049] STATEMENT: ALTER TABLE flyspray_attachments ADD COLUMN attachment_id SERIAL
2021-04-28 10:33:07.194 EDT [2032049] ERROR: current transaction is aborted, commands ignored until end of transaction block
2021-04-28 10:33:07.194 EDT [2032049] STATEMENT: ALTER TABLE flyspray_attachments ADD COLUMN task_id INTEGER
[…and everything else fails because the transaction aborted…]

It appears that the upgrade script is blindly trying to create columns that already exist in the -rc9 database, and postgresql is treating this as a failure. Because the entire upgrade happens within one transaction, this means the entire upgrade fails at the outset and won’t ever succeed.

The way past this specific problem is to make these ALTER TABLE operations conditional (eg “ALTER TABLE flyspray_attachments ADD COLUMN IF NOT EXISTS task_id INTEGER”).

Trying to add a new user having the same email address as an another user in the do=admin&area=newuser section results in

“That username is already taken. You will need to choose another one.”

instead of

“Email address has already been taken”

(I’ve stumbled on this issue because I have an older disabled user with the same email address)

currently absolute positioning overlapping deny button and not full visible

Possible better solution:

• cssbased toggle

• left:50%; width:300px;margin-left:-150px;margin-top:50px;

make a option in configuration file

me need set same $db1→set_charset(’utf8mb4’); for my MySQLi

have a problem with national letters

I see this error after i try enter national letters to the summary input text field for create new task

Query {UPDATE `flyspray_tasks` SET project_id = ?, task_type = ?, item_summary = ?, detailed_desc = ?, item_status = ?,
 mark_private = ?, product_category = ?, closedby_version = ?, operating_system = ?, task_severity = ?, task_priority = ?, 
last_edited_by = ?, last_edited_time = ?, due_date = ?, percent_complete = ?, product_version = ?, estimated_effort = ?
 WHERE task_id = ?} 
with params {1,1,тестовая задача,<p>sdfsdfdsfsd</p> ,2,0,4,0,1,2,4,1,1441344777,0,0,1,0,2} Failed!
(Incorrect string value: '\xD1\x82\xD0\xB5\xD1\x81...' for column 'item_summary' at row 1)

When viewing a project via the tasklist, there are a series of checkboxes available. If a user in a group with “modify own tasks” checks a box on a ticket - no matter who actually owns it - they are given a list of options to change it with.

This should not happen. The checkboxes should only be available from the tasklist if the user can actually edit the tickets they’d be next to.

https://imgur.com/a/JwORB

Correct or wrong code return false!

The results of Securimage Test Script on my server

This script will test your PHP installation to see if Securimage will run on your server.

Session Functionality: Yes!
GD Support: Yes!
GD Version: bundled (2.1.0 compatible)
imageftbbox function: Yes!
TTF Support (FreeType): Yes!
JPEG Support: Yes!
PNG Support: Yes!
GIF Read Support: Yes!
GIF Create Support: Yes!
SQLite Support: Yes!
SQLite is available. If you choose to use it, Securimage can support users who do not accept cookies.
MySQL Support: Yes!
MySQL is available. If you choose to use it, Securimage can support users who do not accept cookies by storing codes in MySQL.
PostgreSQL Support: No
No PostgreSQL support.
LAME MP3 Support: No
LAME was not found, audio will work in WAV format, but not MP3. See Securimage HTML5 audio documentation for info.
Your server meets the requirements for using Securimage!

on modify.inc.php line:754 got

if( !Post::isAlnum('captcha_code') || !$image->check(Post::val('captcha_code'))) {

if( true == false || false == false ) {

Edit 2021-03-15: Only effects Flyspray source releases on Windows where running composer is required. Releases with included dependencies are not effected!

An incorrect email configuration may cause flyspray to hung during several seconds and report an exception.

Environment

* Linux Debian 10
* Nginx
* PHP-7.3 FPM
* Mariadb 10.3
* Flyspray 1.0-rc9

Steps done to create the problem:

1. Cause a misconfiguration in the email configuration (e.g. an email server rejecting the user authentication)
2. Try to post a comment on a ticket to generate a notification

Expected behavior:

Report the error in a logfile and gently show a user-friendly notification

Experienced behavior:

Flyspray hungs during several seconds and reports a user-unfriendly error:
The exception occurs in conditions that generate email notifications (e.g. posting a comment on a ticket):

Notice: fwrite(): send of 6 bytes failed with errno=104 Connection reset by peer in /var/www/flyspray/vendor/swiftmailer/swiftmailer/lib/classes/Swift/Transport/StreamBuffer.php on line 240 Completely unexpected exception: Expected response code 250 but got code "421", with message "XXX edited XXX"
This should never happend, please inform Flyspray Developers

FS version: 1.0-rc9
PHP version: 7.4.15
database: mysql
php.ini: error_reporting = E_ALL | E_STRICT

Steps done to create the problem:
- Login as Admin or User, with name “Admin”, not with email.

Experienced behavior:
PHP Notice: Trying to access array offset on value of type bool in …/flyspray-1.0-rc9/includes/class.flyspray.php on line 812

A possible fix is attached as patch.

Think, it is this line in currend code:
https://github.com/Flyspray/flyspray/blob/5b0a3d80fc9612ca8e8743450fbf2c8243b5bf47/includes/class.flyspray.php#L836

There should be only one request to

js/callbacks/gethistory.php when activating the History tab

The request is made:

• on mousedown event
• on click event

So holding down the tab sends the first request and releasing sends the second request.

Sometimes comes this message with a lot of backtrace log.
If you are reporting a bug please provide as much information as possible to help understand and reproduce the problem:

Did you installed an official release or did you used an inoffical docker?!
Official download flyspray-1.0-rc9

mysqlnd 5.0.12-dev
Linux 64bit
PHP Version 7.2.25

Steps done to create the problem:
Wait some weeke and edit a ID.

Experienced behavior:

[18-Dec-2019 13:19:41 Europe/Berlin] PHP Notice:  session_start(): ps_files_cleanup_dir: opendir(/tmp/.priv) failed: Permission denied (13) in /var/foo/htdocs/flyspray/includes/class.flyspray.php on line 1006
[18-Dec-2019 13:19:41 Europe/Berlin] PHP Warning:  session_start(): Cannot send session cache limiter - headers already sent (output started at/var/foo/htdocs/flyspray/includes/class.flyspray.php:1006) in /var/foo/htdocs/flyspray/includes/class.flyspray.php on line 1006
[18-Dec-2019 12:19:41 UTC] PHP Warning:  Cannot modify header information - headers already sent by (output started at /var/foo/htdocs/flyspray/includes/class.flyspray.php:1006) in /var/foo/htdocs/flyspray/index.php on line 96
[18-Dec-2019 12:19:41 UTC] PHP Warning:  Cannot modify header information - headers already sent by (output started at /var/foo/htdocs/flyspray/includes/class.flyspray.php:1006) in /var/foo/htdocs/flyspray/index.php on line 97
[18-Dec-2019 12:19:41 UTC] PHP Warning:  Cannot modify header information - headers already sent by (output started at /var/foo/htdocs/flyspray/includes/class.flyspray.php:1006) in /var/foo/htdocs/flyspray/includes/class.csp.php on line 76
[18-Dec-2019 12:19:41 UTC] PHP Warning:  Cannot modify header information - headers already sent by (output started at /var/foo/htdocs/flyspray/includes/class.flyspray.php:1006) in /var/foo/htdocs/flyspray/includes/class.csp.php on line 80
[18-Dec-2019 12:19:41 UTC] PHP Warning:  Cannot modify header information - headers already sent by (output started at /var/foo/htdocs/flyspray/includes/class.flyspray.php:1006) in /var/foo/htdocs/flyspray/includes/class.csp.php on line 82

From: https://groups.google.com/forum/?hl=en#!topic/flyspray/jC5BBQ1XiQo

19-04-09 // More one year ago.

On https://www.flyspray.org/ On https://www.flyspray.org/devel/team/

Replace :
- https://www.psi-im.org/ → https://psi-im.org/

→ Remove the WWW.

If you are reporting a bug please provide as much information as possible to help understand and reproduce the problem:

Did you installed an official release or did you used an inoffical docker?!

database type and version, php version and OS version/linux distribution flavour, global or project settings you used that could be relevant for reproducing the problem

Steps done to create the problem: Deleate a Task

Expected behavior: Send a email

Experienced behavior:
Completely unexpected exception: Connection could not be established with host smtp.gmail.com [Connection timed out #110]
This should never happend, please inform Flyspray Developers

If you have a tasklist with tasks that have multiple assignees in a task and you search just by one of the assignees, the resulting tasklist shows only this user in the assignees column.

Expected: all assignees of the tasks are shown.

I tried to register a user test3, and in my flyspray Installation the adminstratior disabled the notifications.
So I could only select “None” as text next to “Notifications”. After I pressed the button “Send Code!”, I received the email with the confirmation code. I clicked on the link in the email, and on the appearing website I entered the confirmation code and password and pressed the button “Register this account”.

Then I got the next e-mail message.
This message begins with:

“You have registered at Flyspray. Your details are as follows:”

This e-mail ends with the sentences:

“You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don’t want to receive mails in future, you can change your notification settings at the URL shown above.”

But this is not true. I have not requested this email. I as user test3 cannot change the notification settings because the notifications are disabled by the administrator.

Official release

Steps done to create the problem:
Insert correct (tested with gmail) data into the notification tab and click on “Test”

SSL and TLS are checked.

Expected behavior:
Send test email and confirm it.

Experienced behavior:
Following error message

Error message:
Warning: stream_socket_enable_crypto(): Peer certificate CN=`*.netcup.net’ did not match expected CN=`mail*.netcup.net’ in /var/www/vhosts/.netcup.net/httpdocs/**/flyspray/vendor/swiftmailer/swiftmailer/lib/classes/Swift/Transport/StreamBuffer.php on line 103 Completely unexpected exception: Unable to connect with TLS encryption
This should never happend, please inform Flyspray Developers

With the existence of now two peoples named “Peter” on bugs.flyspray.org (I - peterdd , and PeterTheOne)
there are several places where the full names are display instead of usernames and the user can’t know who is which “Peter” until he visits the users profile page.

Different solutions possible:

• more profile image/gravatar usage where user names are shown, on mouseover link title attribute shows username and realname
• display user name (username) instead of full name (realname)
• display full name and username (where much space available and precision needed)
• …

When adding the mention feature, the username will be probably the prefered setting as the username is unique but the realname not.

Hello,

When registering and when later editing users settings it’s possible to specify “Time zone” but the way it’s implemented is confusing. What I see is a drop-down list with GMT[+-]:digit: and this is an odd way to set the timezone for multiple reasons:

1. “GMT” is a word without universally accepted and defined meaning these days, see https://www.ucolick.org/~sla/leapsecs/timescales.html#GMT ;

2. Often time zone specification needs to include the rules when (if ever) to apply DST and what abbreviation is to be used in different cases. See TZ description on https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap08.html#tag_08_03 .

Taking these two points into account I can’t see how to meaningfully use this feature.

TIA for looking into it.

In the page http://www.flyspray.org/manual/group_permissions/ , it is written

Shown is an image of the permissions page for the Flyspray project’s Contributors group

but there is no image in there.

I can think of two ways of dealing with that I guess:

1. add an image
2. remove the sentence

What do you think?

Keyboard navigation is not documented

grep -r 'accesskey' *

Closing a task with selected close reason duplicate should warn when there is no comment or FS # id is given in the close comment text field.

The task is closed as duplicate without any further notice. The information to which task it is duplicate or a description (if the problem is logged/handled outside Flyspray) is lost.

Possible solutions

Frontend hints

Backend deny

I understand this is likely due to some sort of XSS CSRF protection, but the delay doesn’t appear to be long enough to be useful for a lengthy comment to be posted. I’ve now lost two detailed comments in our tracker because the software threw everything out and generated a meaningless error.

Further, attempting to do the normal thing and making the browser resubmit the page results in Flyspray throwing “Error #3” something something repeated action and causing a redirect to the homepage.

Surely there has to be a better way to handle this that doesn’t incur data loss?