Flyspray

This is the Bug Tracking System for the Flyspray project. This is not a demo!

2021-04-23: Flyspray 1.0-rc10 released See https://github.com/Flyspray/flyspray/releases

If you are upgrading from older version, please wait for 1.0-rc11.

2021-11-23: New user registration and password forgotten currently not working on bugs.flyspray.org due email server problems. peterdd

ID Category Task Type Severity Summary Status Progress Assigned To Due In Version  desc Opened Last Edited
2552EmailBug ReportHighEmail TLS error (was 'Mail Adress encryption')Unconfirmed
0%
330.05.201908.04.2020 Task Description

Official release

Steps done to create the problem:
Insert correct (tested with gmail) data into the notification tab and click on “Test”

SSL and TLS are checked.

Expected behavior:
Send test email and confirm it.

Experienced behavior:
Following error message

Error message:
Warning: stream_socket_enable_crypto(): Peer certificate CN=`*.netcup.net’ did not match expected CN=`mail*.netcup.net’ in /var/www/vhosts/.netcup.net/httpdocs/**/flyspray/vendor/swiftmailer/swiftmailer/lib/classes/Swift/Transport/StreamBuffer.php on line 103 Completely unexpected exception: Unable to connect with TLS encryption
This should never happend, please inform Flyspray Developers

2568DocumentationBug ReportMedium[MANUAL] a missing image in "Understanding Permissions:...Unconfirmed
0%
101.09.201902.09.2019 Task Description

In the page http://www.flyspray.org/manual/group_permissions/ , it is written

Shown is an image of the permissions page for the Flyspray project’s Contributors group

but there is no image in there.

I can think of two ways of dealing with that I guess:

  1. add an image
  2. remove the sentence

What do you think?

2582Backend/CoreInformationLowHow to reach internal windows share (was: Internal URL)Unconfirmed
0%
304.11.201905.11.2019 Task Description

I have installed flyspray on an internal server and have problems with the renaming of internal links.

For example:
I want to put this link in the comment section.
\\192.168.200.5\Folder\example.docx

it shows the link correct,
but when you hover over the link it shows:
file://192.168.200.5/Folder/example.docx

And on clicking on it, of course I can´t access the file, because it´s trying to open an external link.
I dont want it to be renamed from ‘\’ to ‘/’.

Can somebody help me please.

I tryed to find it in the sourcecodes, but I have almost no experience in PHP.

Thank you!

2587Backend/CoreTODOMediumdisplay_errors=1 should not set in release candidateUnconfirmed
0%
18.12.201918.12.2019 Task Description

display_errors = 1 should not set in include/fix.inc.php for releases or releases candidate, because with this it is not possibele to disable the error reporting globaly.

The problem is, if I want to enable full error reporting to logfile via “error_log=…” in php.ini, then the error will also full reported to user. Full error reporting is a hig risk for security.

Did you installed an official release or did you used an inoffical docker?!
flyspray-1.0-rc9

Steps done to create the problem:
Create a file php.in in base directory with follow contens:
error_reporting = E_ALL | E_STRICT
log_errors = On
display_errors = Off
error_log = /var/log/php-flyspray-errors.log

Expected behavior:
Errors only to log file

Experienced behavior:
All errors goes also to user.
The option “display_errors = Off” has no effect.

2588Backend/CoreBug ReportLowps_files_cleanup_dir: opendir(/tmp/.priv) failed: Permi...Unconfirmed
0%
218.12.201905.02.2021 Task Description

Sometimes comes this message with a lot of backtrace log.
If you are reporting a bug please provide as much information as possible to help understand and reproduce the problem:

Did you installed an official release or did you used an inoffical docker?!
Official download flyspray-1.0-rc9

mysqlnd 5.0.12-dev
Linux 64bit
PHP Version 7.2.25

Steps done to create the problem:
Wait some weeke and edit a ID.

Experienced behavior:

[18-Dec-2019 13:19:41 Europe/Berlin] PHP Notice:  session_start(): ps_files_cleanup_dir: opendir(/tmp/.priv) failed: Permission denied (13) in /var/foo/htdocs/flyspray/includes/class.flyspray.php on line 1006
[18-Dec-2019 13:19:41 Europe/Berlin] PHP Warning:  session_start(): Cannot send session cache limiter - headers already sent (output started at/var/foo/htdocs/flyspray/includes/class.flyspray.php:1006) in /var/foo/htdocs/flyspray/includes/class.flyspray.php on line 1006
[18-Dec-2019 12:19:41 UTC] PHP Warning:  Cannot modify header information - headers already sent by (output started at /var/foo/htdocs/flyspray/includes/class.flyspray.php:1006) in /var/foo/htdocs/flyspray/index.php on line 96
[18-Dec-2019 12:19:41 UTC] PHP Warning:  Cannot modify header information - headers already sent by (output started at /var/foo/htdocs/flyspray/includes/class.flyspray.php:1006) in /var/foo/htdocs/flyspray/index.php on line 97
[18-Dec-2019 12:19:41 UTC] PHP Warning:  Cannot modify header information - headers already sent by (output started at /var/foo/htdocs/flyspray/includes/class.flyspray.php:1006) in /var/foo/htdocs/flyspray/includes/class.csp.php on line 76
[18-Dec-2019 12:19:41 UTC] PHP Warning:  Cannot modify header information - headers already sent by (output started at /var/foo/htdocs/flyspray/includes/class.flyspray.php:1006) in /var/foo/htdocs/flyspray/includes/class.csp.php on line 80
[18-Dec-2019 12:19:41 UTC] PHP Warning:  Cannot modify header information - headers already sent by (output started at /var/foo/htdocs/flyspray/includes/class.flyspray.php:1006) in /var/foo/htdocs/flyspray/includes/class.csp.php on line 82
2589User InterfaceBug ReportLowTime zone in user settings is confusingUnconfirmed
0%
228.12.201928.12.2019 Task Description

Hello,

When registering and when later editing users settings it’s possible to specify “Time zone” but the way it’s implemented is confusing. What I see is a drop-down list with GMT[+-]:digit: and this is an odd way to set the timezone for multiple reasons:

1. “GMT” is a word without universally accepted and defined meaning these days, see https://www.ucolick.org/~sla/leapsecs/timescales.html#GMT ;

2. Often time zone specification needs to include the rules when (if ever) to apply DST and what abbreviation is to be used in different cases. See TZ description on https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap08.html#tag_08_03 .

Taking these two points into account I can’t see how to meaningfully use this feature.

TIA for looking into it.

2595NotificationsFeature RequestLowNotifications to message platforms Unconfirmed
0%
105.03.202026.03.2020 Task Description

Is there any possible implementation in the future of a way to send new tasks and edited tasks in to discord or some messaging software like bots do, for example github bot will post new issues to a channel in discord so users can see and check up on things, especially for big projects which use these types of things and need a way to notify users of updates

2599Backend/CoreInformationLowadd post request on new task creationUnconfirmed
0%
30.03.202012.04.2021 Task Description

I’m currently using flyspray 0.9.9.7

I want to make a little integration of our flyspray installation into slack.
I want make a POST request when a “new task is created”

Any experiment guy can help here ?
1. Where is the best place to achieve this quickly as “hack hardcode” 2. Im not php developer, is there any php lib in flyspray todo quick POST request without installing any additional lib.

2600Backend/CoreInformationLowError #17 when selecting a projectUnconfirmed
0%
31.03.202031.03.2020 Task Description

When I am at the global projects page at index.php?do=admin&area=editallusers and now select a project from the dropdown menu at the top right, I get an error

FEHLER #17: Ungültiger Projektmanager-Bereich!

(according to the the translation area this is key 813: error17 Invalid PM area.)

If I select the project again, the projects start page will be shown correctly.

2608EmailBug ReportMediumNotification email sent although not requestedUnconfirmed
0%
105.05.202005.05.2020 Task Description

I tried to register a user test3, and in my flyspray Installation the adminstratior disabled the notifications.
So I could only select “None” as text next to “Notifications”. After I pressed the button “Send Code!”, I received the email with the confirmation code. I clicked on the link in the email, and on the appearing website I entered the confirmation code and password and pressed the button “Register this account”.

Then I got the next e-mail message.
This message begins with:

“You have registered at Flyspray. Your details are as follows:”

This e-mail ends with the sentences:

“You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don’t want to receive mails in future, you can change your notification settings at the URL shown above.”

But this is not true. I have not requested this email. I as user test3 cannot change the notification settings because the notifications are disabled by the administrator.

2613Public RelationsInformationVery LowEmail ist SignupUnconfirmed
0%
116.09.202016.09.2020 Task Description

My School has blocked me from signing up for the Mailing list, how do I sign up or can you add me?

2614EmailBug ReportCriticalConnection timed out #110Unconfirmed
0%
16.09.202016.09.2020 Task Description

If you are reporting a bug please provide as much information as possible to help understand and reproduce the problem:

Did you installed an official release or did you used an inoffical docker?!

database type and version, php version and OS version/linux distribution flavour, global or project settings you used that could be relevant for reproducing the problem

Steps done to create the problem: Deleate a Task

Expected behavior: Send a email

Experienced behavior:
Completely unexpected exception: Connection could not be established with host smtp.gmail.com [Connection timed out #110]
This should never happend, please inform Flyspray Developers

2623EmailBug ReportMediumCompletely unexpected exception on email errorsUnconfirmed
0%
01.02.202115.03.2021 Task Description

An incorrect email configuration may cause flyspray to hung during several seconds and report an exception.

Environment

* Linux Debian 10
* Nginx
* PHP-7.3 FPM
* Mariadb 10.3
* Flyspray 1.0-rc9

Steps done to create the problem:

  1. Cause a misconfiguration in the email configuration (e.g. an email server rejecting the user authentication)
  2. Try to post a comment on a ticket to generate a notification

Expected behavior:

Report the error in a logfile and gently show a user-friendly notification

Experienced behavior:

Flyspray hungs during several seconds and reports a user-unfriendly error:
The exception occurs in conditions that generate email notifications (e.g. posting a comment on a ticket):

Notice: fwrite(): send of 6 bytes failed with errno=104 Connection reset by peer in /var/www/flyspray/vendor/swiftmailer/swiftmailer/lib/classes/Swift/Transport/StreamBuffer.php on line 240 Completely unexpected exception: Expected response code 250 but got code "421", with message "XXX edited XXX"
This should never happend, please inform Flyspray Developers
2626Backend/CoreBug ReportCriticalCreate a new build, last stable is 0.9.9.7 (2012-05-28)...Unconfirmed
0%
727.02.202107.10.2022 Task Description

The last build is very old, it is possible to create a new build?
- The last RC: 2 years soon
- The last stable: 9 years soon

GitHub Releases section:
- https://github.com/Flyspray/flyspray/releases

Latest release
v1.0-rc9
136c339

Flyspray 1.0-rc9

@peterdd peterdd released this Apr 22, 2019

Stable: http://www.flyspray.org/docs/download/

Flyspray 0.9.9.7 - 28 May 2012
2627Backend/CoreBug ReportLowcheckLogin: Trying to access array offset on value of t...Unconfirmed
0%
509.03.202111.03.2021 Task Description

FS version: 1.0-rc9
PHP version: 7.4.15
database: mysql
php.ini: error_reporting = E_ALL | E_STRICT

Steps done to create the problem:
- Login as Admin or User, with name “Admin”, not with email.

Experienced behavior:
PHP Notice: Trying to access array offset on value of type bool in …/flyspray-1.0-rc9/includes/class.flyspray.php on line 812

A possible fix is attached as patch.

Think, it is this line in currend code:
https://github.com/Flyspray/flyspray/blob/5b0a3d80fc9612ca8e8743450fbf2c8243b5bf47/includes/class.flyspray.php#L836

2643Backend/CoreInformationLowUnable to delete a wrong TaskUnconfirmed
0%
407.07.202108.07.2021 Task Description

Today I received a Spam into my Flyspray, I wanted to ban the user and to delete the task, to my surprise I didn’t see an option to -delete- a created task, so I don’t want to keep this spammy content into my DB or even worse, publically viewable to other users / or google (which will impact in seo and also make their spamming successful forever), I just wanted to simply remove the task entirely from the DB

So my only option was to restore the 2-days before database backup in order to remove it, then I upgraded to the last git checkout but I didn’t see that option existing

I think flyspray needs to have that option included

Thank you

2649Installer and UpgraderFeature RequestLowDocker Container: is there a way to hook into the setup...Unconfirmed
0%
1011.08.202127.08.2021 Task Description

Hi, in my free time of the last few days I begun developping a Docker container: https://github.com/blu-base/flyspray-docker. I derived it from a nextcloud docker container… For now, I limited my focus on an apache/debian buster container. I’d be happy to contribute the project to the official placeholder when it is ready.

Anyhow, in the entrypoint script, I use some environment variables to create the flyspray.conf.php from scratch. and would now need to populate the database. I understand i have to use the respective xml scheme as the setup/index.php does.


I am not experienced with php and database applications and would like to ask you for advice how to proceed efficiently.

Since the current setup is indented to be interactive in the browser, i would need to use a cli tool or a purposely-build php script to do the same task on the command line/on container startup. But this seems to me this would be code duplication and introduce more maintenance work.

  • Is it possible to hook into only some of the functions of the setup/index.php?
  • What could be the next best approach to populate the db on first start?
  • Would it be a viable solution in trying to further modularize the setup - allowing to run parts on cli, like nextcloud’s occ tool?
2661Backend/CoreBug ReportMediumhttp(s) links are broken with ";" in emailUnconfirmed
0%
329.10.202207.11.2022 Task Description

@peterdd: Links are broken in the received emails:
- https://example.tld/?p=blablabla.test;a=test

In the Flyspray, it works, you can see here.

2663Backend/CoreTODOVery LowImpossible to modify a personal ticketUnconfirmed
0%
201.11.202206.11.2022 Task Description

@peterdd: Modify a personal ticket is not enabled in this bugtracker.

Can you solve it?

Thanks in advance.

2664Backend/CoreBug ReportLow"(" or ")" in a link does not workUnconfirmed
0%
201.11.202206.11.2022 Task Description

“(” or “)” in a link does not work, example:
- https://example.net/test(test).html

Source:

https://example.net/test(test).html 
2665Backend/CoreBug ReportMediumhttp(s) link text has not "http" or "https" in received...Unconfirmed
0%
101.11.202206.11.2022 Task Description

@peterdd: There is a problem, in received email, link texts are cutted.

Example:

https://example.tld/test

becomes in email

example.tld/test
2666Backend/CoreBug ReportLowTag user with ID numberUnconfirmed
0%
01.11.202206.11.2022 Task Description

@peterdd: It is not possible to tag user with ID number?

You can see a lot of problems with tag here:
- https://bugs.flyspray.org/index.php?do=details&task_id=2660

1958User InterfaceFeature RequestLowPreselect values for event log viewNew
0%
09.03.201509.03.2015 Task Description

Most (or even all?) of the selectable events should be preselected in the selection list.

1960Backend/CoreBug ReportMediumforeign key relations between versions and tasksNew
0%
209.03.201513.08.2015 Task Description

It seem that when deleting a version entry in a project, that tasks that have this version assigned are still connected to this deleted version. For example FS#1222 (on 2015-03-09).

There are several options to solve such things:

  • Deny deletion of version as long as tasks assigned to this project version.
    • Either by doing a testing SQL query to check this case coded in PHP. Take care to keep this centralized, must also be respected by an eventually later added Flyspray API (XMLRPC or whatever).
    • add SQL foreign key constraints with ON DELETE RESTRICT
      • Pro: some business logic can be directly enforced by SQL.
      • Cons: higher requirements for hosting, if using mysql innodb tables must be available on the hosting
  • Move the tasks of this version to a default fallback version before deleting the version tag.
    • Either doing one transaction doing : 1. move the tasks to its fallback version, 2. delete the version
    • add SQL foreing key constraint with ON DELETE SET $fallbackversionid. Some pros & cons like on the the denying option.

The same for other assignments for tasks.

This issue is similiar to the massop issue: (https://github.com/Flyspray/flyspray/issues/130)

1961User InterfaceFeature RequestLowshow new notifications in flysprayNew
0%
11.03.201511.03.2015 Task Description

similiar to facebook.com or github.com show new unread notifications on the topbar.

1962Backend/CoreFeature RequestLowSMS notification - sending notifications via sms same a...New
0%
211.03.201502.12.2015
1964DocumentationFeature RequestLowOn page documentationNew
0%
11.03.201511.03.2015
1971Backend/CoreFeature RequestLowa field like challenge level or doom levelNew
0%
12.03.201512.03.2015
1985Database QueriesFeature RequestVery LowFor developers - testing with huge flyspray data setsNew
0%
224.03.201516.03.2016
1991User InterfaceFeature RequestMediumAbillity to drill into progress graph from toplevel vie...New
0%
17.04.201524.04.2015
1999XMPP/JabberFeature RequestMediumjabber xmpp configurationNew
0%
8122.06.201511.02.2017
2002User InterfaceFeature RequestLowshow user role on autocomplete for verificationNew
0%
122.06.201517.10.2019
2007Backend/CoreBug ReportLowtime on project overview activity timelinesNew
0%
18.07.201518.07.2015
2008User InterfaceTODOLowdifference between related tasks and related linksNew
0%
18.07.201518.07.2015
2023NotificationsFeature RequestLowInform users if reminder is disabled in system settingsNew
0%
04.08.201504.08.2015
2029Backend/CoreFeature RequestLowpossibility to let a user describe himselfNew
0%
112.08.201518.01.2018
2030User InterfaceFeature RequestLowshow votes of a user on user pageNew
0%
12.08.201515.01.2017
2032User InterfaceFeature RequestLowreplace hardcoded ... 'ellipsis'New
0%
1112.08.201512.08.2015
2034User InterfaceFeature RequestLowreduced extended search form when applicableNew
0%
17.08.201517.08.2015
2036Backend/CoreBug ReportVery Lowsession timeoutNew
0%
2121.08.201512.01.2016
2038Backend/CoreBug ReportLowJscalendar must be replaced with something elseNew
0%
223.08.201524.08.2015
2057Backend/CoreBug ReportLowDo not resubmit forms on browser reload button or F5New
0%
122.09.201523.09.2015
2058Backend/CoreBug ReportLowClosing of github.com 'Issues' featureNew
0%
24.09.201524.09.2015
2059Backend/CoreFeature RequestLowusage of github automated/webhook notificationsNew
0%
24.09.201524.09.2015
2062User InterfaceTODOLowreview do=admin&area=editallusersNew
30%
329.09.201515.04.2020
2063Backend/CoreFeature RequestVery Lowshow closed/open usage count on do=pm&area=XXXNew
10%
peterdd129.09.201525.03.2021
2073Backend/CoreBug ReportLowCouldn't edit comment of anonymous reporterNew
0%
17.10.201517.10.2015
2104Backend/CoreBug ReportLowfiltering by one user on tasks with multiple assignees ...New
0%
226.02.201615.06.2020
2105Backend/CoreFeature RequestMediumcountermeasures for 'add task anonymous' spamNew
0%
127.02.201627.02.2016
2114TranslationsTODOMediumStandardize the priority meaning across flyspray transl...New
0%
207.04.201626.03.2018
Showing tasks 201 - 250 of 326 Page 5 of 7

Available keyboard shortcuts

Tasklist

Task Details

Task Editing