Flyspray - The bug killer!

This is the Bug Tracking System for the Flyspray project. This is not a demo!

2019-04-22: Flyspray 1.0-rc9 released See https://github.com/Flyspray/flyspray/releases

ID Category Task Type Severity Summary Status Progress Assigned To Due In Version Opened  desc Last Edited
2197Backend/CoreBug ReportHighChange Time for everyoneUnconfirmed
0%
121.08.201622.08.2016 Task Description

Flyspray does not recover the time set in php.ini. On display, the system has two hour delay.

2193User InterfaceFeature RequestLowEdit a comment while seeing task details and other comm...New
0%
07.08.201608.08.2016 Task Description

If someone with ‘edit comment’-permission wants to edit a comment, the edit comment form is shown on an extra page.

This is not optimal, because the editor cannot see task details or the other comments while modifying the comment.

Possible Solutions

  • with javascript is enabled: Stay on the ‘task detail’-page, just the comment changes from a ‘view’ layout to ‘edit’ layout, similiar to the quickedit-feature (like in FS1.0).
  • when javascript is disabled: The ‘edit comment’-page shows task details (check permissions) and other comments too, but maybe a bit narrow, so ‘visible focus’ is on editing the comment.
2190Backend/CoreFeature RequestLowenable move of a closed clask to other project without ...Researching
0%
06.08.201606.08.2016 Task Description

Problem: By replacing just the project_id of the closed task it is possible the task then has invalid field values within the target project.

Possible scenarios:

  1. Ignore invalid values within the target project
    • Pro: Easy to do, an immidiatly revert back to the old project would “heal” the task properties.
    • Contra: may effect accuracy and reliability of other parts like searching, listing, statistic calculations
  2. Silent change task field values to valid field values of the target project if necessary
    • Pro: relative easy to do
    • Contra: a bit loss of information, little side effects
  3. allow user to modify the fields that must be changed so that every field of the task has valid values within the target project
    • Pro: accuracy
    • Contra: a bit loss of information(fallback to default values) if there are no similiar field values selectable within the project
  4. allow user to modify the fields, fields or field select values that do not exists in target project will be automatically created.
    • Pro: accuracy
    • Contra: target project may be cluttered with too many fields/field values
  5. ???
2188Backend/CoreBug ReportVery LowIt should not possible to relate a task to itselfNew
0%
01.08.201601.08.2016 Task Description

Flyspray should show a warning, and maybe set the focus back to the field (only when it is a this-one-field-only-form.)

2160Backend/CoreBug ReportLowCannot "accept" PM close request if already closedUnconfirmed
0%
14.07.201614.07.2016 Task Description

If a task creator requested closure, and someone (developer) closes the task explicitly, the PM request cannot be later ‘accepted’ and the PM request remains in the queue.

Workaround - Deny request and queue item is removed OK.

It looks like the PM request button invoked details.close which returns early if task is already closed.

2159Backend/CoreTODOHighfresh registered user accounts created spam tasksNew
0%
204.07.201625.10.2016 Task Description

Today it was first time I see real spam on bugs.flyspray.org

The 2 spam accounts registered today and started creating spam posts as new tasks.

What is the reason? Was it by real humans or bots?

So what can we do to reduce this in future?

Ideas for making it harder and unattractive for spammers:

  • Users who never opened a nonspam-task or contributed a useful comment should solve a captcha
  • Limit the amount of creating tasks for new registered users or a user groups, like limiting to 2 tasks or 1 task per user per day.
  • Settings for a more moderated task creation process? Like a quarantine dbtable for tasks?
  • If we closed such spam tasks with WTF? reason, it will still be listed by search engines like google at the moment:
  1. Move spam tasks to a ‘dumpster project’, that is not visible for guests (search engines!) too.
  2. Or make spamming to visible flyspray projects unattractive, lets set noindex for: closed task for some special reason id?
  3. Delete spam tasks from database if allowed by your organization

Update: another and this time more aggressive phone number spammer.

2143TranslationsTODOVery Lowjscalendar: week start should be monday, ISO 8601Confirmed
10%
201.07.201603.03.2019 Task Description

The current jscalendar shows sunday as the first day of the week by default.

Could be modified for a language by adding

// First day of the week. 0 means Sunday, 1 means Monday
Calendar._FD = 1;

js/jscalendar/lang/calendar-XX.js

See also https://github.com/Flyspray/flyspray/commit/f7831b7f6845e237b79da2a68d475f21a24fff72#diff-70a18ca66e215fc5aa282d4c58fed4ab

It should default to Monday as defined by ISO 8601.

https://en.wikipedia.org/wiki/ISO_8601#Week_dates

https://en.wikipedia.org/wiki/Week#Week_numbering

2142Backend/CoreBug ReportLowPost-authenticate redirect does not make use of baseurl...Unconfirmed
0%
28.06.201601.08.2016 Task Description

I run flyspray behind a reverse proxy with the front end url being https and with the actual back end server not being on a standard port and not using https.

Setting force_baseurl seems to sort most areas with flyspray’s url generation using that instead of picking up from $_SERVER, however post-authentication redirection does not do that it just processes redirect_to as is (which in my case means it picks up the protocol, name and port for the back end server rather than what’s set in force_baseurl).

./themes/CleanFS/templates/loginbox.tpl puts out $_SERVER[’REQUEST_URI‘] into a hidden redirect_to input field - on my setup on the front page that’s e.g. “/” or for a ticket url it would be “/index.php?do=details&task_id=999” so no protocol or hostname.

scripts/authenticate.php picks up that redirect_to value and just passes it to Flyspray::Redirect, which in turn calls FlySpray::absoluteURI on what it’s passed, and FlySpray::absoluteURI doesn’t use $baseurl to qualify the url.

Not sure what the best fix is - my suggestion would be that Redirect detects urls that aren’t fully qualified and adds the $baseurl on to the front of them, rather than calling absoluteURI (absoluteURI is used to set $baseurl if force_baseurl is unset, so that’s not appropriate to modify). Alternatively scripts/authenticate.php could check redirect_to and add $baseurl if needed.

2139User InterfaceFeature RequestVery LowAdd project setting of popular used programming languag...New
0%
1.1 devel17.06.201617.06.2016 Task Description

This is at the moment just a bit brainstorming ..:

Let the project administrator define what source code languages are used/popular in a software project and dependend of that setting prefer/promote that languages at the dokuwiki editor buttonbar.

This requires probably an additional database field in the flyspay_projects table (if just used for dokuwiki that should be ok)

If thinking further like Filter me all software projects that may ontain CSS code on the projects overview, a m:n-table setup is thinkable. But thats maybe overengineering..
Or can we use the existing tag-feature for that and just ‘tag’ projects with tags?

2138User InterfaceFeature RequestVery LowOverhaul dokuwiki editor buttonbarNew
0%
17.06.201617.06.2016 Task Description

Rethink the current sets of buttons and their functionality.

Maybe a mousover hint/cheatsheet of available dokuwiki syntax is more helpful in writing fast and efficient.

  • buttongroup links http,email,ftp
  • buttongroup code, code php: why a single button for php? maybe a cheatsheet or subselect for choosing a language (read directory plugins/dokuwiki/inc/geshi for that). Or even better: Let the project administrator define what source code languages are used/popular in a software project and dependend of that setting prefer/promote that languages
  • I miss a blockquote- or cite-tag for citation, which is more semantic than bold, italic, underline buttons. Update: It is the > character followed by text!
  • Show a cheatsheet (by mouseover?) of dokuwiki smileys as defined at plugins/dokuwiki/conf , update to current config of dokuwiki, facepalm for instance is missing
8-) 8-O 8-o :-( :-) =) :-/ :-\ :-? :-D :-P :-o :-O :-x :-X :-| ;-) ^_^ :?: :!: LOL FIXME DELETEME

8-) icon_cool.gif 8-O icon_eek.gif 8-o icon_eek.gif :-( icon_sad.gif :-) icon_smile.gif =) icon_smile2.gif :-/ icon_doubt.gif :-\ icon_doubt2.gif :-? icon_confused.gif :-D icon_biggrin.gif :-P icon_razz.gif :-o icon_surprised.gif :-O icon_surprised.gif :-x icon_silenced.gif :-X icon_silenced.gif :-| icon_neutral.gif ;-) icon_wink.gif ^_^ icon_fun.gif (not working as first character on a line, bug?) :?: icon_question.gif :!: icon_exclaim.gif LOL icon_lol.gif FIXME fixme.gif DELETEME delete.gif

2137Backend/CoreBug ReportLowfeature accesskey bad implemented by web browsersNew
0%
15.06.201615.06.2016 Task Description

My tests showed that the html accesskey feature is not well and consistent supported by current web browsers and is quite cumbersome to use.
And it seems it will not be better in future..

The only solution I see dropping that feature or replacing them with simple single-key-event javascript listeners, like it is currently done with keys o, j, k, n, and p.

accesskeys in Flyspray I talk about:

  • l (current SHIFT+ALT+l Firefox) login dialog / logout
  • a (current SHIFT+ALT+a Firefox) add new task
  • m (current SHIFT+ALT+m Firefox) my searches
  • t (current SHIFT+ALT+t Firefox) focus taskid search
  • e (current SHIFT+ALT+e + Enter Firefox) edit task
  • x or y? (current SHIFT+ALT+y Firefox) close task
  • s (current SHIFT+ALT+s Firefox) save task

Also related to Keyboard navigation: tabindex

2136User InterfaceBug ReportMediumAfter updating user properties as admin - return to wro...Confirmed
0%
308.06.201623.07.2016 Task Description

Logged in as admin, modify a users group membership. After clicking update, you are returned to your logged-in profile (admin in this case). It should re-display the user’s profile you are editing.

The ‘back’ button will return to updated page.

2135Backend/CoreBug ReportHigh"Modify own tasks" does not function correctly when add...Confirmed
50%
1.013107.06.201622.08.2016 Task Description

“Oh, there are some incompatible properties set that must be resolved before moving this task to a different project.”

Oh, but I am not moving the task to a different project. Just trying to edit my own submission.

“Edit this task” → “Save details”

See attached screen capture.

2134Backend/CoreBug ReportHighCannot assign a task to other projectPlanned
0%
3207.06.201617.02.2019 Task Description

Moving task to another project seems to require fields updated to target project options. This operation is not possible on the task category field and possibly others. Attempting to submit changes gives error:

“Oh, there are some incompatible properties set that must be resolved before moving this task to a different project.”

However, you cannot select a new value (from the target list) for the properties in question.

2128Text RenderingBug ReportLowGeshi (part of dokuwiki plugin for code blocks) uses de...Confirmed
20%
2120.05.201605.05.2019 Task Description

The dokuwiki plugin uses a very old version of geshi for syntax highlighting which uses the deprecated /e modifier in preg_replace in two places rather than preg_replace_callback.

This can trigger warnings such as the following when initially parsing content which uses dokuwiki syntax and includes code:

PHP message: PHP Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /home/phpapps/flyspray/plugins/dokuwiki/inc/geshi.php on line 2058

PHP message: PHP Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /home/phpapps/flyspray/plugins/dokuwiki/inc/geshi.php on line 2067

This affects bugs.flyspray.org as well. Several hits came up on google when I search for the following due to the warnings having been displayed ahead of the page content (seen screenshot): flyspray preg_replace_callback

Because flyspray caches the results of processing dokuwiki content then the warnings don’t get emitted if the content has already been cached (so you may find that when you access the url in the screenshot that it doesn’t show the warnings unless you clear the cache entry for that task). Previews can get the warnings spat out as well if there are tagged code sections in the content.

I had a look at a more recent version of geshi (1.0.8.11 from sourceforge) and they had fixed that issue in it (presumably along with a lot of other stuff) so I tried replacing plugins/dokuwiki/inc/geshi.php and plugins/dokuwiki/inc/geshi/* with the 1.0.8.11 versions and that stopped the warnings. I haven’t extensively tested it, but it was processing stuff in code blocks correctly still on the couple of samples I tried.

I guess it’s a separate issue but the new flyspray theme doesn’t have any css styles to apply to the syntax highlighting (if you look at  FS#1107  you can see that, and in fact you can see it with the css bit below - if you inspect them with a browser dom inspector you can see that the genshi plugin has parsed and tagged the bits, but no styles are applied so its all just in the default colour). I can raise that as a separate task if worth doing? The following section in bluey stylesheet covered it I think:

.code .br0 {color:#6c6;}
.code .es0 {color:#009;font-weight:700;}
.code .kw1 {color:#b1b100;}
.code .kw2 {color:#000;font-weight:700;}
.code .kw3 {color:#006;}
.code .kw4 {color:#933;}
.code .me0 {color:#060;}
.code .nu0 {color:#c6c;}
.code .re4 {color:#099;}
.code .sc0 {color:#0bd;}
.code .sc1 {color:#db0;}
.code .sc2 {color:#090;}
.code .st0 {color:red;}
.code .co1,.code .co2,.code .coMULTI {color:gray;font-style:italic;}
.code .kw5,.code .re0,.code .re1,.code .re2 {color:#00f;}
2127User InterfaceFeature RequestLowoverhaul task detail page layoutNew
0%
120.05.201625.05.2016 Task Description

There was a question on the mailing list:

I have a suggestion, even though I don´t know if it´s possible to do it. But if it is, it would be great!
In the comments list of a given task, is it possible that the comments appear from the newest one to the oldest ones, and not as it is now, with the new ones coming at the end of the list? This is because I deal with long comments list for a given task, and it is becoming difficult to reach the last one, that is, the newest comment, because the order in the comments is on the top, the older ones. If this could be altered it would be great. Kind regards
Ana ...

Quick anwsers:

  1. Users can use ‘End’-key and ‘Pos1’-key on their keyboard to scroll to bottom and top of page. (lame anwser I know)
  2. Another quick anwser is to just reverse the comments array in the appropriate template themes/CleanFS/templates/details.tabs.comments.tpl :

Replace

<?php foreach($comments as $comment): ?>

with

<?php
$comments_latestfirst=array_reverse($comments);
foreach($comments_latestfirst as $comment): ?>

But the real problem I think is that the details page (and others too..) is not optimized for todays wide screens (landscape views). Laptops have FullHD or higher but the Flyspray users still have to scroll to get an overview of a task.

And for narrows views too (mobile phones, tablet portrait view)

The attached screenshot shows moving the task details tabs beside their task description if the display width is over 1200 css pixel. (and the reversed comments too ;-) ). Done with pure css media query:

E.g. add to a custom stylesheet file custom_detailswidescreen.css in folder themes/CleanFS/ :

@media only screen and (min-width: 1200px) and (orientation: landscape) {
.details .tab.active{
        display:inline-block;
}
 
.details .tab{
width:44%;
padding-left:0px;
/*margin-top:60px;*/
box-sizing:border-box;
}
 
.details .commenttext pre {
overflow:auto;
}
.details .comment_container .comment {
width:auto;
margin-left:30px;
display:block;
}
.details .comment_avatar {
position:absolute;
}
.details #comments .fa.fa-user{
font-size:30px !important;
}
 
#submenu li a{margin-left:0;}
 
.details #submenu{
display:inline-block;
position:absolute;
padding:1em 0 0;
margin-top:26px;
}
 
.details #content{
display:inline-block;
box-sizing:border-box;
vertical-align:top;
width:55%;
}
 
/* just a temporary fix: should be redone in theme.css with class instead ids*/
#comments, #related, #notify, #remind, #effort, #history {margin-top:72px;}
 
}

(Has still some problems with current 1.0-rc1 when the project selector wraps. Also tab labels wrap if not enough width available and tab content do not adapt.)

What do you think? How should the details page look on different display sizes? How can it improve the workflow of the user?

2126User InterfaceFeature RequestLowdynamic meta description (was: Change page title)Confirmed
0%
1.1 devel217.05.201617.05.2016 Task Description

Hello,

When i put a link in Discord for example, it detects “Flyspray, a Bug Tracking System written in PHP.” as title. How to change it ?

Edit by peterdd: adapted task title/summary to the root of the problem.

2124User InterfaceFeature RequestVery LowDefault avatar can't be restoredConfirmed
0%
227.04.201629.04.2016 Task Description

I unchecked the avatar allowed in the admin panel. I checked it back and set size to 50.
I have to upload an Avatar picture to restore it, but the previous avatar looked like to be html avatar.

Is there a way to restore the html one ?

note: ‘default avatar’ is currently just that guy from the fontawesome webfonts:

<i class="fa fa-user"></i>
2122Backend/CoreBug ReportMediumopen_basedir restrictions for FS_CACHE_DIR not respecte...Suspended
0%
422.04.201616.08.2016 Task Description

Edit by peterdd: renamed task summary

Affected versions: at least Flyspray 0.9.9(.7/*?) up to Flyspray 1.0 RC1

Original report: Title ‘Problem regarding 0.9.7 (1.0) to 1.0 RC-1 update’

I tried to update BT from modified version (database in original state) 0.9.7 to 1.0 RC-1 but I got strange error.

PHP is 5.6.

I try to use:
Precompiled with 3rd party libs for PHP5.6

and was doing as was written on upgrade procedure.

Strange is that “D:\SShopBT\includes\class.flyspray.php” there are errors regarding writtable path... Because the path is correct and all other Joomla and Wordpress web sites are working correctly..

After upgrade web site do not work att all. Login not working - just get error. So I must reverse (use backup) database and files.

Server is Windows Server and IIS (Internet Information Services)..

Complete error was (also seen in screenshot):

Warning: is_writable(): open_basedir restriction in effect. File(C:\PHP-temp) is not within the allowed path(s): (D:\) in D:\SShopBT\includes\class.flyspray.php on line 1162 
Warning: is_writable(): open_basedir restriction in effect. File(C:\PHP-temp) is not within the allowed path(s): (D:\) in D:\SShopBT\includes\class.flyspray.php on line 1164 
Warning: is_dir(): open_basedir restriction in effect. File(C:\Windows\TEMP\e865fa2fdfc11dbb32cc6262d247e766) is not within the allowed path(s): (D:\) in D:\SShopBT\includes\constants.inc.php on line 82 
Warning: Cannot modify header information - headers already sent by (output started at D:\SShopBT\includes\class.flyspray.php:1162) in D:\SShopBT\header.php on line 14 
Warning: Cannot modify header information - headers already sent by (output started at D:\SShopBT\includes\class.flyspray.php:1162) in D:\SShopBT\header.php on line 15 
Warning: Cannot modify header information - headers already sent by (output started at D:\SShopBT\includes\class.flyspray.php:1162) in D:\SShopBT\header.php on line 16 
Warning: session_start(): Cannot send session cookie - headers already sent by (output started at D:\SShopBT\includes\class.flyspray.php:1162) in D:\SShopBT\includes\class.flyspray.php on line 893 
Warning: session_start(): Cannot send session cache limiter - headers already sent (output started at D:\SShopBT\includes\class.flyspray.php:1162) in D:\SShopBT\includes\class.flyspray.php on line 893 
Warning: Cannot modify header information - headers already sent by (output started at D:\SShopBT\includes\class.flyspray.php:1162) in D:\SShopBT\index.php on line 93 
Warning: Cannot modify header information - headers already sent by (output started at D:\SShopBT\includes\class.flyspray.php:1162) in D:\SShopBT\index.php on line 94 Headers are already sent, this should not have happened. Please inform Flyspray developers.
2121Backend/CoreBug ReportMedium'my assigned tasks' uses like %?% search instead of use...Confirmed
90%
1.0319.04.201603.02.2018 Task Description

Problem: https://github.com/Flyspray/flyspray/pull/552

The button ‘My assigned tasks’ should search only by userid, not in username or realname with the LIKE ‘%...%’ operator.

Currently the button is using the same as doing an advanced search filling the ‘Assigned To’ input field. (currently ‘dev’ param) But that search param searches in userid, username and realname.

Edit: Implemented simpler solution: if param is digitsonly, then search by userid, otherwise by username and realname if that param exists.

2119Backend/CoreBug ReportMediumfunction filter_input not always availableResearching
0%
15.04.201615.04.2016 Task Description

filter_input() is in extension “Filter”.

It is enabled by default since PHP5.2, see http://php.net/manual/en/migration52.new-extensions.php but not “always”, see https://groups.google.com/forum/?hl=de#!topic/flyspray/QM75BvwPqGM

filter_input() is only used at 1 section in Flyspray (since 2014 up to v1.0rc1) in includes/fix.inc.php
This is the commit https://github.com/Flyspray/flyspray/commit/40861911260812c99682fe3456350cb63bb243a9

How do we solve it? Several possibilities:

2118User InterfaceFeature RequestLowShow overview of existing tags for usersNew
0%
1.1 devel09.04.201609.04.2016 Task Description

At several places it could be useful to let the user view available tags:

  1. When editing a task a toggle popup could show a list of selectable and existing tags.
  2. Make the list of tags searchable for the advanced search.
2116EmailBug ReportMediumError with email notificationUnconfirmed
0%
1908.04.201615.04.2016 Task Description

I have a major problem. At the first I thought that problem is on my server - Windows OS, IIS. But now when I have second bug tracker site on Apache server and error is the same I know that this is not server error but bug tracker error.

How can I help that we resolve this problem?

If e-mail need’s to be sent I got blank white page and nothing happens.

In attachment is my bug tracker with installer (setup) folder. If this somehow helps it?

Version which is used is 1.0 (latest on web) (edit by peterdd: was a mix of older Flyspray versions). The problem is that nothing works because e-mails are not working..

2114TranslationsTODOMediumStandardize the priority meaning across flyspray transl...New
0%
207.04.201626.03.2018 Task Description

Standardize the priority meaning across flyspray translations.

Idea:

0 - priority unset (database field default value)

1 - defer (or very low priority, often results the task is defered, see “Eisenhower principle”)
2 - low
3 - normal
4 - high
5 - very high

6 - flash (house burns, catastrophic event, website down, “boss” decision)

Some other software (other task planers/ email programs) use a 1-5 step priority. So an export feature to other software may merge priority 6 to priority 5 for such software.

In 2012 meaning was changed only in english translation.

Before normal was priority 2 in a 1-6 range, after it is priority 4 in a 1-6 range.
It should be IMHO 3 in that 1-6 range.

2112APIBug ReportMediumAssigned tickets aren't editable for lower privileged u...Unconfirmed
0%
231.03.201611.04.2016 Task Description

An assigned ticket can't be edited by a lower privileged user.

Steps to reproduce:

  • One Project, Two Users. User A is Admin, User B is Basic
  • A creates a Task.
  • A take ownership of the Task. (it’s important to do this AFTER saving the task. You cannot assign User A if you are A in this moment. Maybe another Bug...!?)
  • Now B is allowed to take ownershop too. B click now “Add me to assignees”.
  • Now B can edit the task.
  • If B click “save”, the task can’t be saved, because some fields haven’t the correct values (esp: state is now “unconfirmed”). Many error messages said, that unexpected values exist

Some weird moments:

  • Why can B edit a task? He have no rights to edit tasks...
  • If B are Basic and have “edit own Task”-Right too, this bug also exist.
2111Installer and UpgraderBug ReportMediumUpon trying to install flyspray release, setup says I'm...Planned
10%
224.03.201605.06.2016 Task Description

When I tried to install a instance of flyspray that is a release, I am greeted with a screen that says that I am trying to install a development version of flyspray. Due to me using shared hosting, I am unable to run any composer commands.

My version of flyspray was downloaded from flyspray.org, so why would this be happening? Thanks

2108User InterfaceFeature RequestMediumSupport local language when install FlysprayConfirmed
30%
3103.03.201615.07.2016 Task Description

Please show install page as local language, Thank you.

2107Backend/CoreFeature RequestLowSupport CAS Server AuthenticateUnconfirmed
0%
102.03.201604.03.2016 Task Description

Please support Central Authentication Service, thank you.

2105Backend/CoreFeature RequestMediumcountermeasures for 'add task anonymous' spamNew
0%
127.02.201627.02.2016 Task Description

Today I got first SPAM on bugtracker.

Question: Is it possible to enable CAPTCHA for anonymus task add?

Question 2: Is it possible to delete SPAM tasks.

2104Backend/CoreBug ReportLowfiltering by one user on tasks with multiple assignees ...New
0%
26.02.201626.02.2016 Task Description

If you have a tasklist with tasks that have multiple assignees in a task and you search just by one of the assignees, the resulting tasklist shows only this user in the assignees column.

Expected: all assignees of the tasks are shown.

2101Backend/CoreBug ReportLowMobile view GUI bugConfirmed
20%
418.02.201624.02.2016 Task Description

As you can see on screenshot attachment the GUI on mobile view is not OK.

I marked with red field what need to be fixed.

Phone used: Samsung Note 4.

2098User InterfaceBug ReportMediumAttached image cannot be downloadedConfirmed
50%
1.1 devel530.01.201610.01.2017 Task Description

Steps:

- Attach an image to a task.
- It shows as a link in your task (cf. screenshot “Screenshot from 2016-01-29 18-34-31.png”).
- Click on the link.

Result: it opens a “popup” with the image displayed in it. If the image is big, the popup is just so huge the image is not visible without boring horizontal and vertical scrolling (see “Screenshot from 2016-01-30 15-07-26.png” which shows what I see when I click the image link on my task).
I can’t even right click to download from the menu since I see no “Save Image As” item. (see Screenshot-no-save-image-in-menu.png).

My workaround was that if I drag and drop the attachment link in the address bar, I finally get the expected image, which I can finally save as! This workaround was hard to find, and I expect most people will just get frustrated of being able to view an image attachment, yet not save it locally.

I proposes the following:
- a small “download” icon next to the image link in the task for direct download (without preview).
- a “download” link/icon on the top-left of the image display popup (to download while previewing).

And as a side feature (maybe I should make a separate report?), I suggest that by default the image display popup constrains the image to the screen size, with a “see real size” link, so that you don’t get the popup with huge scrolling when opening a big image on a smaller screen.

Note: of course this issue does not appear with non displayable attachment. If I have a zip or a document, it proposes me to download it directly.

2097User InterfaceBug ReportMediumUrl incorrect for view attachementUnconfirmed
0%
10116.01.201602.03.2016 Task Description

I’m using URL rewriting…

If I click on the link, the picture doesn’t appear.

https://flyspray.xxx.fr/task/27?getfile=8

It’s ok in task history. The right URL is

https://flyspray.xxx.fr/?getfile=8

.

2096Backend/CoreFeature RequestVery LowAdd an option to force httpsMaybe
0%
316.01.201617.01.2016 Task Description

Can you add an option to force HTTPS ?

Thx.

2094EmailBug ReportHighAfter Upgrade All Users Receive Notifications for All T...Unconfirmed
0%
4106.01.201613.01.2016 Task Description

I upgraded from 0.9.9 to 1.0-beta2 a few hours ago. I received an error about oauth during the upgrade (didn’t think to take a screenshot). In any case, the upgrade otherwise seemed to go smoothly. When I subsequently closed a few tasks people who weren’t assigned to receive notifications for those tasks, even old consultants whose account I had disabled years ago, received the email notification. I also received lots of bounced emails from accounts whose email addresses were no longer existant.

Has anyone else experienced this? I’ve gone into the database and null’d out the email addresses of old accounts to prevent further spam. Not only did it notify everyone who had an account (active or disabled) but it put their email address in the To: field for all to see.

2089Backend/CoreBug ReportMediumadding same taskid as subtask or related task should be...New
50%
1.0207.11.201518.11.2016 Task Description

Both is a bit illogical, but both is currently possible! ;-)

1 ←- 1

So when setting the parent task id checked for creating loops is needed:

Loop with 2 tasks: 1 ←- 2 ←- 1

Loop with 3 tasks: 1 ←- 2 ←- 3 ←- 1
Loop with n tasks: 1 ←- ... ←- n < – 1

As I think there are currently no recursive reads that could lead to an endless loop, but should be kept in mind when someone wants to programm rendering a gantt chart.
E.g. by limiting the depth of subtasks for example.

2087Backend/CoreInformationHighSee no Editor in Add New TaskUnconfirmed
0%
4104.11.201505.11.2015 Task Description

Hi,

I can’t see the Editor when I make new task. Also when I editing a exciting task.

See nothing to put any HTML code in it. Can you help me!?

I use this version: Flyspray 0.9.9.7

2086Backend/CoreBug ReportHighBasic User can see all Projects and TasksUnconfirmed
20%
803.11.201526.01.2017 Task Description

Since Update to Flyspray 1.0 Beta2 all users can see every task in every project.

The rights were set up correctly in Flyspray 1.0 Alpha and worked just fine.

2085Text RenderingInformationMediumEnabling Color Coding options in CKEDITORUnconfirmed
0%
130.10.201530.10.2015 Task Description

Hi

So I figured out that there are no color coding options (to set text color and background color) for text in the CKEDITOR. I did some changes to CKEDITOR to add those, however, once I submit the text, it does not retain the changes.

Is there a particular reason why these are not enabled in the first place?

I am thinking it would be good add these, so that we can make the important text pop-out to the users.

- Raju

2083User InterfaceInformationLowDrag and drop tasks on roadmapUnconfirmed
0%
30.10.201530.10.2015 Task Description

On the roadmap it would make life a lot easier if it was possible to drag and drop tasks into versions.

2081User InterfaceBug ReportLowUI for adding comment while editing task doesn't use HT...Confirmed
0%
429.10.201506.11.2015 Task Description

While editing an existing task, there’s a “+” button you can click to add a comment as part of the edit. Unfortunately this is just a plaintext box instead of the HTML editor used everywhere else, so it’s impossible to get proper line/paragraph breaks if a comment is entered with this UI.

This problem makes it necessary to edit a task and add a comment as two separate steps, whereas in 0.9.9.6 it was possible to do them together in one step.

Note that this is the case with syntax_plugin=”none”. I don’t know if it’s also a problem when using other values for that setting.

2078User InterfaceBug ReportMediumlayout of requested close on small displaysNew
0%
1.026.10.201529.10.2015 Task Description

currently absolute positioning overlapping deny button and not full visible

Possible better solution:

  • cssbased toggle
  • left:50%; width:300px;margin-left:-150px;margin-top:50px;
2075NotificationsBug ReportHighToo spammy notifications under some circumstancesRequires testing
40%
1.019.10.201503.11.2015 Task Description

danoh on github wants to work on patch. Couldn’t find him here..

2074User InterfaceBug ReportMediumOpening tasks from tasklistNew
0%
1.0318.10.201518.07.2016 Task Description

Removing table on row click made it impossible to open a task’ details if you do not display the task id and summary on the task list, because now those two cells are the only clickable items to open a task, instead of the entire line being the hyperlink

2073Backend/CoreBug ReportLowCouldn't edit comment of anonymous reporterNew
0%
17.10.201517.10.2015 Task Description

I wanted edit/fix the comment of an anonymous reporter, but the edit shows empty content on editing..

(here on closed, but non yet implemented  FS#218 )

2072User InterfaceFeature RequestLowSetting parent task interface is too hiddenConfirmed
0%
2116.10.201516.10.2015 Task Description

Hello!

Today i was installed flyspray from git master and found some error.

Any user interface missing any fields to set parent task. Show parent field options was added in “fields when add/edit/view task” field at preferences page for project, but no affect.

Screenshots:

http://joxi.ru/vAWVOKGS9Y812W http://joxi.ru/D2P6dY7h0MnKr3 http://joxi.ru/1A5RGxwSVoM0rE

Flyspray version: Github master branch

2071EmailBug ReportLowNew user e-mail validationConfirmed
0%
14.10.201514.10.2015 Task Description

On flyspray/index.php?do=admin&area=newuser I sucessfuly register user with email ;

I don’t recieve popup with message ‘You did’nt enter valid e-mail address’

After that on new page i receive error:

Completely unexpected exception: Address in mailbox given [;] does not comply with RFC 2822, 3.6.2.
This should never happend, please inform Flyspray Developers

2068Backend/CoreInformationLowDeprecated: mysql_connect(): The mysql extension is dep...Unconfirmed
0%
710.10.201508.12.2015 Task Description

My version of PHP still shows deprecation warnings with flyspray.

Deprecated: mysql_connect(): The mysql extension is deprecated and will be removed in the future: use mysqli or PDO instead in /var/www/flyspray.itiab.co.nz/htdocs/adodb/drivers/adodb-mysql.inc.php on line 353

Have all mysql.connect instances been removed? The connect will be removed from PHP soon and will cause problems.

2066Installer and UpgraderFeature RequestMediumAutomated site update (like Wordpress)Unconfirmed
0%
209.10.201510.10.2015 Task Description

All is in the title

vote for this task please

2065User InterfaceFeature RequestMediumOne click signup (with facebook, twitter , Google, yaho...Unconfirmed
50%
1109.10.201503.03.2016 Task Description

Hello,

I wanted to request a feature that will DRAMATICALLY increase the popularity and the usage of flyspray worldwide which is :

One click signup

This can be done by using existing signup solutions like openID, live.com, Google, Facebook ,twitter, Yahoo, gravatar (these are the most universal according to http://www.alexa.com/topsites)

The goal is to give a new user the possibility to sign up in less than 15 sec (and mention this in the signup page)
Showing tasks 101 - 150 of 293 Page 3 of 6 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing