Flyspray - The bug killer!

This is the Bug Tracking System for the Flyspray project. This is not a demo!

2019-04-22: Flyspray 1.0-rc9 released See https://github.com/Flyspray/flyspray/releases

ID Category Task Type Severity Summary Status Progress Assigned To Due In Version  desc Opened Last Edited
2224GreekBug ReportVery LowSemicolon is a bad separatorUnconfirmed
0%
1124.10.201625.10.2016 Task Description

The symbol “;” in Greek is the question mark. So a list of semicolon-separated values looks like a series of questions in Greek. (looks like this: “cat? dog? rabbit?” ;-))

I suggest replacing semicolons with commas as list separators.

In email lists space is good choice too.

2223GreekBug ReportVery LowSome strings need splitting or replacementUnconfirmed
0%
2124.10.201625.10.2016 Task Description

There is a conflict in meaning in some words. In English past tense (”he closed the task”) and past participle (”List of closed tasks”) is the same word. But in Greek they are two different words (past tense of close: έκλεισε, past participle of close: κλεισμένος/κλεισμένη/κλεισμένο/.../etc → (actually, past participle has 3 genders (male/female/neutral) x 2 grammatical numbers (singular/plural) x 4 grammatical cases (nominative/genitive/accusative/vocative)) = 24 combinations but we’ll deal with this later if needed).

So, strings that now are used both as past tense and past participle, or used both for singular and plural, must split and use a different string when past tense and a different string when past participle or singular/plural.

These strings are:

varvaluenotes
openedOpened It is used in Event log as past tense (meaning: “User X opened Y task” or “Y task was opened by X” → so in Greek must either use past tense or past participle as singular because it’s one task) and it is also used in Overview as past participle (meaning: “List of opened tasks” → so in Greek must use plural). On the other hand, the same message in task’s History uses var taskopened=”Task opened”. Maybe it would be best if var taskopened was used in Event log too instead of var opened. It would solve my problem.
closedClosed (same as above)
editedEdited (same as above)
2222GreekInformationVery LowGreek translation issuesUnconfirmed
0%
324.10.201624.10.2016 Task Description

After completing the Greek translation I have a series of issues I want to report concerning mainly (but not limited to) the Greek languange.

I was thinking of opening a separate task for each one of them (note that they are all ultra low severity/priority) and adding them as sub-tasks to this one (or maybe as dependencies - or both).

I also request a Translations > Greek sub-category. I really have a lot of issues.

2220Backend/CoreInformationLowOne status with different color in tasklistUnconfirmed
0%
524.10.201603.11.2016 Task Description

Since we have a lot of tasks pending, our team leader wants a specific status (let’s say: Waiting for dispatch) to be marked with a green background in tasklist.
Can you please help me to make this mod?

Thanks in advance.

2216NotificationsFeature RequestLowAdd slack integration (webhook)Unconfirmed
0%
1118.10.201625.10.2018 Task Description

It would be great to be able to configure a slack webhook that would post to a channel any task creation/deletion/modification.

2215Text RenderingBug ReportLowwrong output of Geshi syntax highlighting for xml codeNew
0%
117.10.201631.12.2017 Task Description

Geshi 1.0.8.17 from https://github.com/easybook/geshi is quite slow at the current integration of Flyspray v1.0-rc3 on the first run. (But any further read uses the cache.)

But it produces garbled output for xml code highlighting:

Example without xml, just format as preformatted code:

<table>blabla</table>

Or as php syntax highlighting (even if it doesn’t contain a real php-tag ;-) ):

<table>blabla</table>

Example with xml choosen as language:

blabla

The table tag is stripped away instead of converting the tag for output inside code/pre tags (by converting the < and > chars). Maybe just a configuration issue?

2214Backend/CoreInformationLowChanging status of task automaticallyUnconfirmed
0%
417.10.201606.11.2016 Task Description

Hello again,

I was wondering (again :-) ) if the following scenario is possible for this bug tracking solution:

Our company uses this bug tracker mainly for helpdesk issues. However, our main users (except IT department) don’t seem to easily understand how to change the status of a ticket, they aren’t interested in doing that also.

So I would like to know if there is a way that we can develop some automatisation in changing the status automatically after customer replies to a message.

Let’s see the following scenario:

  1. user A posts a new task
  2. user B assigns himself (or other) to that specific task - the status automatically is changed to Assigned
  3. user B replies to task by adding a comment - as a result of adding the new comment the task status should change automatically to Waiting for customer - without the need that user B to change the status
  4. user A checks the comment from user B and decides to comment back to him. After pressing the Add comment button, the status should change automatically to Waiting for assignee

If the task is needed to have another status, the users can change them manually, but the automated part should be the waiting for customer and assignee.

On a basic algorithm it shouldn’t be hard (if user is logged in and is task owner, then after comment, task detail - status changing to id 4-5 from task-statuses table on mysql; if user is logged in and assigned to task, after adding comment change status 4-5 from task-statuses table).

I saw this thing on an otrs platform and it is quite ok for a simple user like ours.

Is there any way that we can personalise the flyspray in this way?

If yes, please give us an elaborate answer with what I should do for this to work.

Thanks in advance.

2210User InterfaceInformationLowTasklist color for due dateUnconfirmed
100%
612.10.201618.10.2016 Task Description

Hello,

I was wondering if there is a way to make the task more visible if it wasn’t completed due to the date that was selected by a user - let’s say a yellowish background in tasklist, just like the ones from custom css based on severity, but that will take color if the task has the due date passed.

2209AuthenticationFeature RequestMediumTLS support for LDAPUnconfirmed
0%
109.10.201604.09.2019 Task Description

It would be helpful to have communication with LDAP via TLS

2208Backend/CoreInformationLowSeverity "medium" by defaultSuspended
50%
2127.09.201629.09.2016 Task Description

Hi,
Where i can change severity and priority by default?
I want change severity to “Medium” by default for group Basic
I cant find this option in the Flyspray settings.

2203Backend/CoreInformationLowlanguage files are in folder lang. But i can't change l...Unconfirmed
0%
121.09.201621.09.2016 Task Description

In Admins Toolbox (Project preferences) i choose language de. The file exists in folder lang. But only english is shown. the same for french and so on. No really changes.

2202Installer and UpgraderBug ReportHighUnable to upgradeUnconfirmed
0%
310.09.201611.10.2016 Task Description

I tried to upgrade from 0.9.9.7 to 1-0-rc1 but I end in an infinite redirection loop

I tried to use the github version, to change the domain name (hosted in dreamhost), to use/not-use the .htaccess, upgraded the version of php from 5.5 to 5.6, to change all the settings in the flyspray.conf.php file, but still having the error after to perform the Upgrade task and removing the setup dir

Used the prepacked dependencies since i cannot install them in this server

Thanks
Thanatermesis

2200User InterfaceBug ReportMediumIncomplete list of timezones available in the user pref...Unconfirmed
0%
26.08.201626.08.2016 Task Description

The user preferences and the add new user screens both allow you to set the timezone offset of the user, however, we are only provided with whole hour offsets from GMT. This makes it impossible to select our timezone here in India, which is GMT+5:30 - IST(Indian Standard Time - Asia/Kolkata as per TZ Zoneinfo). In addition, there are also timezones in the GMT+x:45, which wouild also require to be handled. Note, this is totally independent of DST Changes, since some of the countries use DST(Like in Australia) and others do not(Like India).

Here is a link with more details of the same - http://www.timeanddate.com/time/time-zones-interesting.html

I will be trying to identify and fix the codebase to resolve this, and will hopefully have a patch to submit soon.

Regards
R. K. Rajeev

2198User InterfaceBug ReportLowMulti-Select from tasklist offers options to those who ...Unconfirmed
0%
1122.08.201622.08.2016 Task Description

When viewing a project via the tasklist, there are a series of checkboxes available. If a user in a group with “modify own tasks” checks a box on a ticket - no matter who actually owns it - they are given a list of options to change it with.

This should not happen. The checkboxes should only be available from the tasklist if the user can actually edit the tickets they’d be next to.

//imgur.com/a/JwORB

2197Backend/CoreBug ReportHighChange Time for everyoneUnconfirmed
0%
121.08.201622.08.2016 Task Description

Flyspray does not recover the time set in php.ini. On display, the system has two hour delay.

2193User InterfaceFeature RequestLowEdit a comment while seeing task details and other comm...New
0%
07.08.201608.08.2016 Task Description

If someone with ‘edit comment’-permission wants to edit a comment, the edit comment form is shown on an extra page.

This is not optimal, because the editor cannot see task details or the other comments while modifying the comment.

Possible Solutions

  • with javascript is enabled: Stay on the ‘task detail’-page, just the comment changes from a ‘view’ layout to ‘edit’ layout, similiar to the quickedit-feature (like in FS1.0).
  • when javascript is disabled: The ‘edit comment’-page shows task details (check permissions) and other comments too, but maybe a bit narrow, so ‘visible focus’ is on editing the comment.
2190Backend/CoreFeature RequestLowenable move of a closed clask to other project without ...Researching
0%
06.08.201606.08.2016 Task Description

Problem: By replacing just the project_id of the closed task it is possible the task then has invalid field values within the target project.

Possible scenarios:

  1. Ignore invalid values within the target project
    • Pro: Easy to do, an immidiatly revert back to the old project would “heal” the task properties.
    • Contra: may effect accuracy and reliability of other parts like searching, listing, statistic calculations
  2. Silent change task field values to valid field values of the target project if necessary
    • Pro: relative easy to do
    • Contra: a bit loss of information, little side effects
  3. allow user to modify the fields that must be changed so that every field of the task has valid values within the target project
    • Pro: accuracy
    • Contra: a bit loss of information(fallback to default values) if there are no similiar field values selectable within the project
  4. allow user to modify the fields, fields or field select values that do not exists in target project will be automatically created.
    • Pro: accuracy
    • Contra: target project may be cluttered with too many fields/field values
  5. ???
2188Backend/CoreBug ReportVery LowIt should not possible to relate a task to itselfNew
0%
01.08.201601.08.2016 Task Description

Flyspray should show a warning, and maybe set the focus back to the field (only when it is a this-one-field-only-form.)

2160Backend/CoreBug ReportLowCannot "accept" PM close request if already closedUnconfirmed
0%
14.07.201614.07.2016 Task Description

If a task creator requested closure, and someone (developer) closes the task explicitly, the PM request cannot be later ‘accepted’ and the PM request remains in the queue.

Workaround - Deny request and queue item is removed OK.

It looks like the PM request button invoked details.close which returns early if task is already closed.

2143TranslationsTODOVery Lowjscalendar: week start should be monday, ISO 8601Confirmed
10%
201.07.201603.03.2019 Task Description

The current jscalendar shows sunday as the first day of the week by default.

Could be modified for a language by adding

// First day of the week. 0 means Sunday, 1 means Monday
Calendar._FD = 1;

js/jscalendar/lang/calendar-XX.js

See also https://github.com/Flyspray/flyspray/commit/f7831b7f6845e237b79da2a68d475f21a24fff72#diff-70a18ca66e215fc5aa282d4c58fed4ab

It should default to Monday as defined by ISO 8601.

https://en.wikipedia.org/wiki/ISO_8601#Week_dates

https://en.wikipedia.org/wiki/Week#Week_numbering

2142Backend/CoreBug ReportLowPost-authenticate redirect does not make use of baseurl...Unconfirmed
0%
28.06.201601.08.2016 Task Description

I run flyspray behind a reverse proxy with the front end url being https and with the actual back end server not being on a standard port and not using https.

Setting force_baseurl seems to sort most areas with flyspray’s url generation using that instead of picking up from $_SERVER, however post-authentication redirection does not do that it just processes redirect_to as is (which in my case means it picks up the protocol, name and port for the back end server rather than what’s set in force_baseurl).

./themes/CleanFS/templates/loginbox.tpl puts out $_SERVER[’REQUEST_URI‘] into a hidden redirect_to input field - on my setup on the front page that’s e.g. “/” or for a ticket url it would be “/index.php?do=details&task_id=999” so no protocol or hostname.

scripts/authenticate.php picks up that redirect_to value and just passes it to Flyspray::Redirect, which in turn calls FlySpray::absoluteURI on what it’s passed, and FlySpray::absoluteURI doesn’t use $baseurl to qualify the url.

Not sure what the best fix is - my suggestion would be that Redirect detects urls that aren’t fully qualified and adds the $baseurl on to the front of them, rather than calling absoluteURI (absoluteURI is used to set $baseurl if force_baseurl is unset, so that’s not appropriate to modify). Alternatively scripts/authenticate.php could check redirect_to and add $baseurl if needed.

2138User InterfaceFeature RequestVery LowOverhaul dokuwiki editor buttonbarNew
0%
17.06.201617.06.2016 Task Description

Rethink the current sets of buttons and their functionality.

Maybe a mousover hint/cheatsheet of available dokuwiki syntax is more helpful in writing fast and efficient.

  • buttongroup links http,email,ftp
  • buttongroup code, code php: why a single button for php? maybe a cheatsheet or subselect for choosing a language (read directory plugins/dokuwiki/inc/geshi for that). Or even better: Let the project administrator define what source code languages are used/popular in a software project and dependend of that setting prefer/promote that languages
  • I miss a blockquote- or cite-tag for citation, which is more semantic than bold, italic, underline buttons. Update: It is the > character followed by text!
  • Show a cheatsheet (by mouseover?) of dokuwiki smileys as defined at plugins/dokuwiki/conf , update to current config of dokuwiki, facepalm for instance is missing
8-) 8-O 8-o :-( :-) =) :-/ :-\ :-? :-D :-P :-o :-O :-x :-X :-| ;-) ^_^ :?: :!: LOL FIXME DELETEME

8-) icon_cool.gif 8-O icon_eek.gif 8-o icon_eek.gif :-( icon_sad.gif :-) icon_smile.gif =) icon_smile2.gif :-/ icon_doubt.gif :-\ icon_doubt2.gif :-? icon_confused.gif :-D icon_biggrin.gif :-P icon_razz.gif :-o icon_surprised.gif :-O icon_surprised.gif :-x icon_silenced.gif :-X icon_silenced.gif :-| icon_neutral.gif ;-) icon_wink.gif ^_^ icon_fun.gif (not working as first character on a line, bug?) :?: icon_question.gif :!: icon_exclaim.gif LOL icon_lol.gif FIXME fixme.gif DELETEME delete.gif

2137Backend/CoreBug ReportLowfeature accesskey bad implemented by web browsersNew
0%
15.06.201615.06.2016 Task Description

My tests showed that the html accesskey feature is not well and consistent supported by current web browsers and is quite cumbersome to use.
And it seems it will not be better in future..

The only solution I see dropping that feature or replacing them with simple single-key-event javascript listeners, like it is currently done with keys o, j, k, n, and p.

accesskeys in Flyspray I talk about:

  • l (current SHIFT+ALT+l Firefox) login dialog / logout
  • a (current SHIFT+ALT+a Firefox) add new task
  • m (current SHIFT+ALT+m Firefox) my searches
  • t (current SHIFT+ALT+t Firefox) focus taskid search
  • e (current SHIFT+ALT+e + Enter Firefox) edit task
  • x or y? (current SHIFT+ALT+y Firefox) close task
  • s (current SHIFT+ALT+s Firefox) save task

Also related to Keyboard navigation: tabindex

2136User InterfaceBug ReportMediumAfter updating user properties as admin - return to wro...Confirmed
0%
308.06.201623.07.2016 Task Description

Logged in as admin, modify a users group membership. After clicking update, you are returned to your logged-in profile (admin in this case). It should re-display the user’s profile you are editing.

The ‘back’ button will return to updated page.

2134Backend/CoreBug ReportHighCannot assign a task to other projectPlanned
0%
3207.06.201617.02.2019 Task Description

Moving task to another project seems to require fields updated to target project options. This operation is not possible on the task category field and possibly others. Attempting to submit changes gives error:

“Oh, there are some incompatible properties set that must be resolved before moving this task to a different project.”

However, you cannot select a new value (from the target list) for the properties in question.

2128Text RenderingBug ReportLowGeshi (part of dokuwiki plugin for code blocks) uses de...Confirmed
20%
2120.05.201605.05.2019
2127User InterfaceFeature RequestLowoverhaul task detail page layoutNew
0%
120.05.201625.05.2016
2124User InterfaceFeature RequestVery LowDefault avatar can't be restoredConfirmed
0%
227.04.201629.04.2016
2122Backend/CoreBug ReportMediumopen_basedir restrictions for FS_CACHE_DIR not respecte...Suspended
0%
422.04.201616.08.2016
2119Backend/CoreBug ReportMediumfunction filter_input not always availableResearching
0%
15.04.201615.04.2016
2116EmailBug ReportMediumError with email notificationUnconfirmed
0%
1908.04.201615.04.2016
2114TranslationsTODOMediumStandardize the priority meaning across flyspray transl...New
0%
207.04.201626.03.2018
2112APIBug ReportMediumAssigned tickets aren't editable for lower privileged u...Unconfirmed
0%
231.03.201611.04.2016
2111Installer and UpgraderBug ReportMediumUpon trying to install flyspray release, setup says I'm...Planned
10%
224.03.201605.06.2016
2108User InterfaceFeature RequestMediumSupport local language when install FlysprayConfirmed
30%
3103.03.201615.07.2016
2107AuthenticationFeature RequestLowSupport CAS Server AuthenticateUnconfirmed
0%
202.03.201604.09.2019
2105Backend/CoreFeature RequestMediumcountermeasures for 'add task anonymous' spamNew
0%
127.02.201627.02.2016
2104Backend/CoreBug ReportLowfiltering by one user on tasks with multiple assignees ...New
0%
26.02.201626.02.2016
2101Backend/CoreBug ReportLowMobile view GUI bugConfirmed
20%
418.02.201624.02.2016
2097User InterfaceBug ReportMediumUrl incorrect for view attachementUnconfirmed
0%
10116.01.201602.03.2016
2096Backend/CoreFeature RequestVery LowAdd an option to force httpsMaybe
0%
316.01.201617.01.2016
2094EmailBug ReportHighAfter Upgrade All Users Receive Notifications for All T...Unconfirmed
0%
4106.01.201613.01.2016
2087Backend/CoreInformationHighSee no Editor in Add New TaskUnconfirmed
0%
4104.11.201505.11.2015
2086Backend/CoreBug ReportHighBasic User can see all Projects and TasksUnconfirmed
20%
803.11.201526.01.2017
2085Text RenderingInformationMediumEnabling Color Coding options in CKEDITORUnconfirmed
0%
130.10.201530.10.2015
2083User InterfaceInformationLowDrag and drop tasks on roadmapUnconfirmed
0%
30.10.201530.10.2015
2081User InterfaceBug ReportLowUI for adding comment while editing task doesn't use HT...Confirmed
0%
429.10.201506.11.2015
2073Backend/CoreBug ReportLowCouldn't edit comment of anonymous reporterNew
0%
17.10.201517.10.2015
2072User InterfaceFeature RequestLowSetting parent task interface is too hiddenConfirmed
0%
2116.10.201516.10.2015
2071EmailBug ReportLowNew user e-mail validationConfirmed
0%
14.10.201514.10.2015
Showing tasks 201 - 250 of 304 Page 5 of 7

Available keyboard shortcuts

Tasklist

Task Details

Task Editing