Flyspray

On some forms, when the user presses the reload button of this browser, the POST submit can be resubmitted.

Browsers can warn about this (Chromium, Firefox, Konqueror tested and they show a warning dialog) before executing the second POST.
But people on Flyspray mailing list wrote they experienced double comments.

Simple solution is just HTTP GET redirects after a successful POST. (HTTP 303 or HTTP 302)
But maybe there is a better method than a second roundtrip always needed?

Success, Error, or Warn-messages to the user are stored in the $_SESSION variable for displaying on the second GET request.
But I think that this is a bit ... mmh... not perfect.

For example, I would like to have in the direct response at which position in a form an input error is, not just the message bar in the top center as it is currently that just dissappear after a few seconds.

Also take care the browser back button still works as expected for the user.

When a user is deleted from Flyspray, their opened tasks, closed task and task comments are then shown as Anonymous Submitter, the same way as anonymous reporters (not really anonymous, just that user does not have login account, but usually their email address is stored within that task data).

Currently just the entry from users table are deleted when a user is deleted. Their internal user_id integer is still within tasks and comments fields, and maybe some other tables too. So there is not a ON DELETE SET NULL rule or something like that applied. As it is just an autoincremented number by the system, this is not personal data imho and should be no problem for GDPR, but gives Flyspray the ability to distinguish between anon reporters and deleted users. Well, we could also look if there is an email address within task table entry for notification of anonymous reporter, but there are also tasks possible that have no user_id nor an email address.

It might by useful to present that information differently like deleted user or showing the info differently like icon + title-tooltip with explanation.

Also interesting what happens with mentions of a deleted username in a comment or task description. (see FS#2322)

The user isn’t in database, but deleting that now gone user should not modify tasks or comment where that username was mentioned I think.
But what if another user registers under that now gone username? In that case that new user would inherit that mentions. Probably we can ignore that edge case as there will be not much things will happen with an old mention in old tasks/comments.

display_errors = 1 should not set in include/fix.inc.php for releases or releases candidate, because with this it is not possibele to disable the error reporting globaly.

The problem is, if I want to enable full error reporting to logfile via “error_log=…” in php.ini, then the error will also full reported to user. Full error reporting is a hig risk for security.

Did you installed an official release or did you used an inoffical docker?!
flyspray-1.0-rc9

Steps done to create the problem:
Create a file php.in in base directory with follow contens:
error_reporting = E_ALL | E_STRICT
log_errors = On
display_errors = Off
error_log = /var/log/php-flyspray-errors.log

Expected behavior:
Errors only to log file

Experienced behavior:
All errors goes also to user.
The option “display_errors = Off” has no effect.

Currently, if there are no public project, the anonymous users gets a blank page not very useful. It will be a good idea to have a global configuration parameter to display some customizable-page or maybe the login form instead.

It should be made clear to the user what related links are in the
"new task" and "edit task" form and what a user should input in these fields.

Flyspray should be able to render attached patches visually like, for example, Bugzilla: https://bugzilla.wikimedia.org/attachment.cgi?id=4807&action=diff

Some translation keywords of Flyspray are used at more than one code location.

To help translators doing the correct translations, it would help to show in what context a translation keyword is used.
Especially when a keyword is used more than once.

As we have our own translation helper integrated into Flyspray, we could show a ‘translation keyword usage counter’ there and maybe show on request in which file
a translation keyword is used.

It would also help to identify ‘abandoned’ translation keywords that are not used anymore by Flyspray source.

Also it would help to identify when a translation is used at more than one location with maybe different context.

I think we can use a regular expression and scan the whole Flyspray source for that.
(and maybe database entries if there are places that have translation keywords stored - I don’t think so, but better check that too first than forget that case)

The regular expression should match that examples case insensitive for the translation keyword report:

L('report' 
L("report"
eL('report'
eL("report"

but also ugly cases like
l(    'report'
or 
El ( "report"

case insensitive.

But not for example

createURL('report'

My version of PHP still shows deprecation warnings with flyspray.

Deprecated: mysql_connect(): The mysql extension is deprecated and will be removed in the future: use mysqli or PDO instead in /var/www/flyspray.itiab.co.nz/htdocs/adodb/drivers/adodb-mysql.inc.php on line 353

Have all mysql.connect instances been removed? The connect will be removed from PHP soon and will cause problems.

Is there any “ready” SQL query file to delete all tasks and start again ? (without deleting projects, project settings, categories, task types, tags, task statuses etc...)

I unchecked the avatar allowed in the admin panel. I checked it back and set size to 50.
I have to upload an Avatar picture to restore it, but the previous avatar looked like to be html avatar.

Is there a way to restore the html one ?

note: ‘default avatar’ is currently just that guy from the fontawesome webfonts:

<i class="fa fa-user"></i>

splitted from  FS#1697  as own task

Steps done to create the problem:
Access /index.php?do=admin&area=checks with a MySQL Version >= 5.5.3

Expected behavior:
Flyspray tests for character set and displays »Your mysql supports full utf-8 since 5.5.3. You are using x.x.x and flyspray tables could be upgraded.« when database schema or one table isn’t set to utf8mb4 character set.

Experienced behavior:
Flyspray always shows this note, even though character set is correct.

As far as I can tell from the source, a query gets executed to the database (and if I do that manually the result is “utf8mb4, utf8mb4_unicode_ci” for my database), but the result doesn’t get checket, the note is always shown (line 123)

If i set up a custom css in the main FS settings the style doesn’t get applied to all nested projects. I have to set the css to all projects explicitly to get the stylings work on all project pages.
Wouldn’t it be a good idea to first load the css set in the main dialog and after that load an additional css specified in the sub project? Then it would be possible to specify general stylings for all projects and project based stylings also.

Regardless if a gmail.com or other address (tested with my gmail and also other email address)

So this is probably a mail server problem. I try to reach server admin.

I can see my “unfinished registrations” tests in the admin→checks area, but received no emails (waited and checking spam folders too)

The filename for the csv export is build based on project name and current date.

Due different handling of web browsers, the appropriate http header should send the filename in ascii and also provide them as utf-8 for web browsers who can handle that.

Related RFC5987

Layouts from 320 pixel mobile portrait, tablet sizes and up to 4k monitor landscape mode using

@media queries

Mockups required not only for different sizes, but also different project configurations, user permissions, and task relations.

Should look ok whatever project configuration is done or how weird a task description is.

On wider screens the comments could be beside the task description for instance.
Or some tabs or menus could be shown directly instead of grouping in the tabs.

The last build is very old, it is possible to create a new build?
- The last RC: 2 years soon
- The last stable: 9 years soon

GitHub Releases section:
- https://github.com/Flyspray/flyspray/releases

Latest release
v1.0-rc9
136c339

Flyspray 1.0-rc9

@peterdd peterdd released this Apr 22, 2019

Stable: http://www.flyspray.org/docs/download/

Flyspray 0.9.9.7 - 28 May 2012

Today I got first SPAM on bugtracker.

Question: Is it possible to enable CAPTCHA for anonymus task add?

Question 2: Is it possible to delete SPAM tasks.

I wanted edit/fix the comment of an anonymous reporter, but the edit shows empty content on editing..

(here on closed, but non yet implemented  FS#218 )

If you are reporting a bug please provide as much information as possible to help understand and reproduce the problem:

Did you installed an official release or did you used an inoffical docker?!

database type and version, php version and OS version/linux distribution flavour, global or project settings you used that could be relevant for reproducing the problem

Steps done to create the problem: Deleate a Task

Expected behavior: Send a email

Experienced behavior:
Completely unexpected exception: Connection could not be established with host smtp.gmail.com [Connection timed out #110]
This should never happend, please inform Flyspray Developers

Quick anwser: enable swap partition on your server.

Tried upgrading a rc4-dev to rc5-dev/rc6/flyspray-master on a virtual server with 500MB RAM and php5.6.30 on the commandline (debian)

After file upgrade, I wanted also update the vendor stuff according to composer.json changes.

But surprisingly this failed:

php composer.phar update

and also after

php composer.phar selfupdate

to version Composer version 1.5.2 2017-09-11 the memory limit bug exists:

The following exception is caused by a lack of memory or swap, or not having swap configured
Check https://getcomposer.org/doc/articles/troubleshooting.md#proc-open-fork-failed-errors for details

PHP Warning:  proc_open(): fork failed - Cannot allocate memory in phar:///var/www/***/composer.phar/vendor/symfony/console/Application.php on line 979

Warning: proc_open(): fork failed - Cannot allocate memory in phar:///var/www/***/composer.phar/vendor/symfony/console/Application.php on line 979

  [ErrorException]
  proc_open(): fork failed - Cannot allocate memory

Also doing a more fresh vendor install like

rm composer.lock
rm vendor/*
(keeps the .htaccess there)
php composer.phar install

300 MB not enough for a handful of php package installations? wtf, but didn’t dig deeper..

I temporarly solved the problem by making a swap partition on this vServer like suggested at
https://getcomposer.org/doc/articles/troubleshooting.md#proc-open-fork-failed-errors

/bin/dd if=/dev/zero of=/var/swap.1 bs=1M count=1024
/sbin/mkswap /var/swap.1
chmod 600 /var/swap.1
/sbin/swapon /var/swap.1

free
             total       used       free     shared    buffers     cached
Mem:        506300     374920     131380      30628      21904     143872
-/+ buffers/cache:     209144     297156
Swap:      1048572          0    1048572

This is just documentation and is for the people who prefer a Flyspray development version from github.com

Full Flyspray release download files do not needs to fiddle with composer.

Maybe an entry for the FAQ

An incorrect email configuration may cause flyspray to hung during several seconds and report an exception.

Environment

* Linux Debian 10
* Nginx
* PHP-7.3 FPM
* Mariadb 10.3
* Flyspray 1.0-rc9

Steps done to create the problem:

1. Cause a misconfiguration in the email configuration (e.g. an email server rejecting the user authentication)
2. Try to post a comment on a ticket to generate a notification

Expected behavior:

Report the error in a logfile and gently show a user-friendly notification

Experienced behavior:

Flyspray hungs during several seconds and reports a user-unfriendly error:
The exception occurs in conditions that generate email notifications (e.g. posting a comment on a ticket):

Notice: fwrite(): send of 6 bytes failed with errno=104 Connection reset by peer in /var/www/flyspray/vendor/swiftmailer/swiftmailer/lib/classes/Swift/Transport/StreamBuffer.php on line 240 Completely unexpected exception: Expected response code 250 but got code "421", with message "XXX edited XXX"
This should never happend, please inform Flyspray Developers

As discussed with the team some time ago, a consolidation of places where issues are discussed is wanted.

One of the results was, that we do not want people post issues to github.com Issues and instead use our own bugs.flyspray.org
and to prefer "to eat our own dogfood" and a have central place to handle tasks.

As a result we tried to reduce the open issueas on github.com. I was in the process of moving 2 of still 7 open issues there to bugs.flyspray.org when suddenly the Issues on github.com were closed. Now the last 5 issues there are lost at the moment for me and the audience, which where mostly informations to interested users, not bugs.

I think just closing it without an easy accessible alternative is not the best solution.

At least we should wait until the oauth2 authentication for github users should be implemented and setup on bugs.flyspray.org , so people browsing github.com, finding Flyspray project just can
"Login with github"-feature on bugs.flyspray.org.

The blocker to do this: Currently there is missing an option to "connect" an oauth "Login with github"- Login with an existend flyspray userlogin.

So that one userid in flyspray can:

• login with username and password
• login with one or more of his social accounts (github, facebook, microsoft, g+) if they are enabled (would it restrict to github.com accounts for bugs.flyspray.org)

There is a request for cloning a project on Flyspray mailing list:

Would be a very welcome features to have Project Templates for repetitive workflow. Any idea if its in the pipeline?

Thanks

Well, not yet.

The question is, how exactly you want that project clone.

Do you want just a rough copy of the project table entry?
Thats quite easy and can even be done without programming or writing a line of SQL just by using PHPMyAdmin (or similiar Tools for PostgreSQL) and copy a row of the project table for example.
See yellow marked project table on the right of the attached dbschema screenshot.

The other extreme is copying every project depending list table entries to new ones.
This sure requires some programming, but not too hard to add this to Flyspray. (all yellow marked tables in the attached dbschema screenshot.

I attach a rough form mockup how could this could look like.

Possible solution

FS version: 1.0-rc9
PHP version: 7.4.15
database: mysql
php.ini: error_reporting = E_ALL | E_STRICT

Steps done to create the problem:
- Login as Admin or User, with name “Admin”, not with email.

Experienced behavior:
PHP Notice: Trying to access array offset on value of type bool in …/flyspray-1.0-rc9/includes/class.flyspray.php on line 812

A possible fix is attached as patch.

Think, it is this line in currend code:
https://github.com/Flyspray/flyspray/blob/5b0a3d80fc9612ca8e8743450fbf2c8243b5bf47/includes/class.flyspray.php#L836