Flyspray

Currently the category_id is not checked if the value is legal for the project when a new task is created.

• must be unsigned int
• must be an active category_id of the project or global category.
• setting a category_id must be allowed - see project settings.

If invalid category_id is sent, deny creating task and show error message and show filled form again.

If no category_id is sent (or empty string) and category select is enabled:

• either choose a default category

or

• implement feature request FS#2451 and show that user should select a category.

When a user has project manager permissions, but not admin permissions, then on the ‘edit group’ pages like index.php?do=pm&area=editgroup&id=8
the links in the list of users of that group are

index.php?do=admin&area=users&user_id=12345

instead of linking to the users page

index.php?do=user&area=users&id=12345

and a redirect follows with Error #4: You don’t have administrative rights.

Trying to add a new user having the same email address as an another user in the do=admin&area=newuser section results in

“That username is already taken. You will need to choose another one.”

instead of

“Email address has already been taken”

(I’ve stumbled on this issue because I have an older disabled user with the same email address)

Integrate the selectpure javascript to the new task and edit task form.

By default there is a text field where tag names are separated by ‘;’ character.

Selectpure could instead show the tags with their visual layout with a little ‘x’ inside on the right side for removing a tag and autocomplete when typing a tag name to show existing tags from the flyspray_list_tag-table as possible selections.

Instead implemented a CSS and raw javascript solution with a single taghelper.js without any dependancies.

A button beside the tag input text field toggles a list of available tags for the current task, depending on the project and settings.

Still TODO

It would be nice to have a description field to put a brief note about the work done for a given effort item. This would help when using effort tracking for the purpose of making invoices to a client.

I administer a moderate-sized (~14K ticket) 1.0-rc9 instance running on a Fedora 32 host (php 7.4.16, mariadb 10.4.18) Following the upgrade instructions (ie transfer attachments, avatars, flyspray.conf.php) the setup/upgrade tool loads, and prompts me to upgrade.

It churns a while before refreshing the screen, claiming a successful 1.0-rc10 upgrade. However, the upgrade seems to not actually “stick”, because clicking on the “return” button I’m dropped back into the upgrader, which is once again claiming I’m running 1.0-rc9 and prompting me to perform the -rc10 upgrade.

According to Flyspray’s admin ‘checks’ tab:

* PHP 7.4.16
* MariaDB 10.4.18
* default_charset: utf8mb4
* default_collation: utf8mb4_unicode_ci
* All tables are ‘InnoDB’

There are no errors logged that I can find, but the upgrade is clearly not working. If I revert to the -rc9 php files, everything continues along as if nothing was done.

Any suggestions?

I administer a small personal (<1K ticket) 1.0-rc9 instance running on a Fedora 32 host (php 7.4.16, postgresql 12.6) Following the upgrade instructions (ie transfer attachments, avatars, flyspray.conf.php) the setup/upgrade tool loads, and prompts me to upgrade.

Unfortunately, the upgrade fails spectacularly, with a reported SQL error that belies what’s actually wrong. Here’s a snippet from the postgresql logs where the upgrade is failing:

2021-04-28 10:33:07.190 EDT [2032049] ERROR: column “attachment_id” of relation “flyspray_attachments” already exists
2021-04-28 10:33:07.190 EDT [2032049] STATEMENT: ALTER TABLE flyspray_attachments ADD COLUMN attachment_id SERIAL
2021-04-28 10:33:07.194 EDT [2032049] ERROR: current transaction is aborted, commands ignored until end of transaction block
2021-04-28 10:33:07.194 EDT [2032049] STATEMENT: ALTER TABLE flyspray_attachments ADD COLUMN task_id INTEGER
[…and everything else fails because the transaction aborted…]

It appears that the upgrade script is blindly trying to create columns that already exist in the -rc9 database, and postgresql is treating this as a failure. Because the entire upgrade happens within one transaction, this means the entire upgrade fails at the outset and won’t ever succeed.

The way past this specific problem is to make these ALTER TABLE operations conditional (eg “ALTER TABLE flyspray_attachments ADD COLUMN IF NOT EXISTS task_id INTEGER”).

I have been working with Eventum (http://www.mysql.org/downloads/other/eventum/) for quite sometime now and in contrast, I like Flyspray for its simplicity and practicality. But one thing I badly miss (and something that Eventum scores high) is a Workflow Engine. If not a sophisticated W.E., I (as an Admin / Manager) should be able define role-based state transition rules of the tasks reported in a particular project. For example, I should be able to implement the following scenario:

1. For a “Developer”, the subsequent tasks from various states. Likewise for other roles
2. “Developer” should not be able close out the bug reports. He/she can only flag them as implemented. The “Reporter” of the bugs or the “Manager” alone should be able to close out issues
3. ..
4. .. it will go on like that

This feature, in my opinion, is very crucial for corporate organizations to give a serious consideration to Flyspray.

Currently, the Vote functionality provides users a way to say "this issue is important to me". In addition to that functionality, it would be great for users to have a "Verify" ability on open issues; it would provide users a way to say "yes, this happens to me as well".

A "Verified" label would fit nicely right under "Votes", to the right of the label would be "Yes | No", each option being a link. After clicking Yes or No, or if unable to specify (lack of permissions), the text would display "Yes - # | No - # (% verification)" where '%' is the result of ((Yes/(Yes+No))*100).

This feature should not show up on all issues, though. It does not make sense to "verify" a feature request or todo item, for example. When defining task types, the administrator would specify if a type was "Verifiable" by checking a box in a column next to "Show".

If implemented, two great, mini extra features would be:

1. The ability for the administrator to set the number of "Yes" verifications an issue would need before it was elevated to the next priority, severity, or both (specified by the administrator).
2. The ability for the administrator to set the number of "No" verifications an issue would need before it was lowered to the previous priority, severity, or both (specified by the administrator).

Both settings should have an option to be incremental (priority / status increased every x verifications) or not (increases once, no matter how many verifications are received); an "Incremental" checkbox would do nicely. Also, a little "Enabled" checkbox next to both settings would be clearer than having zero act as the disable mechanism.

As with voting, a permission should exist to enable or disable this option for a user group. For larger projects, moderators tasked with verifying bugs could be given the permission whereas smaller projects may leave verifications up to the community.

Lastly, a way to send a notification once the number of "Yes" verifications reached a certain value would also be a great addition.

Hello,
when selecting timezone in user profile, it only offers offset based timezones. It should offer timezones like "Europe/Prague", instead, because in summer it is UTC+2 and in the winter UTC+1. Also UTC is the same as GMT.

Using offsets will cause invalid future and past times when crossing daylight saving or when something other changes.

Adding daylight checkbox is not enough and will cause additional troubles. Just use names and store them as ENUM in database, not offset. This problem is pretty complicated and the only solution is to use names and let libraries to solve it for you.

Thank you.

need add option for can set default Severity and Priority of new creating tasks

All is in the title

vote for this task please

Moving task to another project seems to require fields updated to target project options. This operation is not possible on the task category field and possibly others. Attempting to submit changes gives error:

“Oh, there are some incompatible properties set that must be resolved before moving this task to a different project.”

However, you cannot select a new value (from the target list) for the properties in question.

Flyspray should be able to render attached patches visually like, for example, Bugzilla: https://bugzilla.wikimedia.org/attachment.cgi?id=4807&action=diff

For example, say I no longer want 1.1, 0.9.9.8, 1.0.0, etc. So want to merge them all into one version 1.0. Same goes for OS, and others

There should be some help at the configuration sections for setting up jabber/xmpp notifications.

How someone can test it?

Must the admin setup his own jabber/xmpp server or are there recommended servers?

I registered with psi+ instant messager as peterdd@ubuntu-jabber.de at ubuntu-jabber.de for testing
and configured it here in my account too, but got no jabber messages.

Email notifications works and I set up both sending.

My company maybe changes to a MS SQL Server backed ERP.

In this case it could be nice to have Flyspray customized as CRM working on the same database for integration with ERP.

Well, currently just an idea.

Thomasz wrote:
The other thing that I cannot find how to make the text to be visible in the whole column (as with the summary I get the ... at some point of the text).

The root of this is found in scripts/index.php in function tpl_draw_cell():

case 'summary':
            $value = tpl_tasklink($task, utf8_substr($task['item_summary'], 0, 55));
            if (utf8_strlen($task['item_summary']) > 55) {
                $value .= '...';
            }
            break;

We live in a world now, where the view port ranges from 320 pixel width mobile screens up to 4k+ wide tv screens, the amount of columns is configurable from minimal to all available fields of a task. We currently let the browser automatic decide how wide he renders each column depending on table content and available window size.

Well, that ellipsis problem can be handled at different levels:

• motivate the task creators to use short task summary if possible (e.g. show a hint/tooltip when typing the summary gets over a limit, in our case the hardcoded limit is 55. ). Short task topic/summaries are easier to read/scan for the users.
• replace the hard ellipsis by a pure css solution, that adapts to users browserwindow size/space in in the columns for summary
• drop the ellipsis thing complete, task summary always shown full length, table rows adapt in height automatically.

Possible CSS solution:

• text-overflow now works in all big browsers. For instance see http://stackoverflow.com/questions/2108740/how-do-i-indicate-long-text-into-a-smaller-fixed-column-with-css
• Combined with :hover on the shortened summary the full summary can be shown without the list table starting to flicker/resize.

Got "wrong token" on creating a task whose form were open for a while in browser tab.

That means probably the session timed out on bugs.flyspray.org, so the anti csrf token doesn't existed anymore on the webserver.

It would'nt be a big problem if the browser backbutton works showing the ready written form again, but it was empty.

One solution would be temporarly storing it offline in the browser storages which are available with html5. But open for other simpler solutions..

public static function absoluteURI($url = null, $protocol = null, $port = null)
in
class Flyspray

not using basedir and force_basedir from configuration file

its problem because my web-server inside have port 7777 and outside 80 (nginx and PHP-FPM)

please fix it

Need add view of grouping in Task List by Category

Good if adding functional about easy way for insert screenshots to task

Hello,

I wanted to request a feature that will DRAMATICALLY increase the popularity and the usage of flyspray worldwide which is :

One click signup

This can be done by using existing signup solutions like openID, live.com, Google, Facebook ,twitter, Yahoo, gravatar (these are the most universal according to http://www.alexa.com/topsites)

The goal is to give a new user the possibility to sign up in less than 15 sec (and mention this in the signup page)

Hello!

Today i was installed flyspray from git master and found some error.

Any user interface missing any fields to set parent task. Show parent field options was added in “fields when add/edit/view task” field at preferences page for project, but no affect.

Screenshots:

http://joxi.ru/vAWVOKGS9Y812W http://joxi.ru/D2P6dY7h0MnKr3 http://joxi.ru/1A5RGxwSVoM0rE

Flyspray version: Github master branch

Hi,

I can’t see the Editor when I make new task. Also when I editing a exciting task.

See nothing to put any HTML code in it. Can you help me!?

I use this version: Flyspray 0.9.9.7