Flyspray - The bug killer!

Hello,

I was wondering if there is a way to make the task more visible if it wasn’t completed due to the date that was selected by a user - let’s say a yellowish background in tasklist, just like the ones from custom css based on severity, but that will take color if the task has the due date passed.

Hi,
it could be fine that we could restricted some projects to some users; for example, user #1 could access (and see) project#1, project#3; user#2 could access project#1, project#2, project#4 …

thanks if you can take care of this sincerly,
Domi
Belgium/Europe

Problem: https://github.com/Flyspray/flyspray/pull/552

The button ‘My assigned tasks’ should search only by userid, not in username or realname with the LIKE ‘%...%’ operator.

Currently the button is using the same as doing an advanced search filling the ‘Assigned To’ input field. (currently ‘dev’ param) But that search param searches in userid, username and realname.

Edit: Implemented simpler solution: if param is digitsonly, then search by userid, otherwise by username and realname if that param exists.

After updating from “1.0-rc6” to “1.0-rc7 dev” there is missing controls menu on writer. Look attachment.
How to solve this?

Is there any settings to enable this or I’m missing something...

• On the myprofile page have a section to show all my votes I put on tasks. done!
• Add the possibility to remove own votes from tasks. done!

• Implement a limitation of the amount of votes a user can put on tasks for a project. Can be enabled/disabled and amount configured. Done!
• project based vote limitation

• When a task is finished/closed, remove the user votes from the task and make that vote again available to the user. Maybe safe the existing historic voting count in an extra field of the task as the votes would drop to 0 on closing the task. removed.

We keep the votes, because a task can be reopened everytime and then the old voters and votes should be visible again. In this case the amount of votes on active task could be a bit greater than allowed, but thats no real problem.
The calculation of done votes and available votes based only on open task and project voting limit.

For example on uservoice.com you have 10 voting points. So you as user has to decide where your priorities are to put your votes.

So all users have more or less the same power to vote for tasks.

maybe yet fixed in 1.0 dev, but here bugs.flyspray.org my account is shown twice for selection if u edit a task.

Internally in the form also with the same id, so probably not a big problem.

I registered some years ago, maybe this year jordan(?) added me again or with another email adress? Maybe I have two addresses under on account here, which is a feature, not a bug.

But for the assignee list it should “group by user_id”.

PHP 7.4 is out now and a few things should be done to make Flyspray work well with it.
Nothing really breaks, but a view deprecation warnings should be fixed.

Flyspray source itself: Just a few new notices, most are yet fixed in the master branch.

Watching the PHP7.4 compatibility of dependencies defined by composer.json:

• ADOdb/ADODb: 5.21 for PHP 8 done
• swiftmailer/swiftmailer: We still use 5.* branch, so either do quickfix for a notice in a fork or upgrade/rewrite our integration to the 6.* branch. 6.* is PHP7+, so stay with 5.* branch for now. If Swiftmailer does not fulfill requirements, consider switching to PHPMailer for FS1.1+
• ezyang/htmlpurifier: 4.13 OK
• thephpleague/oauth2-client: unknown, we still use 0.13, last real source change was Nov 2018, to upgrade requires rewrite of integration into Flyspray and there is low demand for OAuth2.
• dapphp/securimage: seems to be OK, but not maintained anymore (we could patch it if there occur problems in future)
• jamiebicknell/sparkline: OK, but probably obsolete for us in future due
  • still annoying problems with our github/travis tests (problem of travis, not sparkline itself)
  • better solution (interactive hover infos, scales, screen size adaptive) by Flyspray source planned

Hello, sorry my english - i’m translated Flyspray ver 0.9.9.7 to czech language - its attached

Petr

In global permissions there is 'View tasks'. This makes it so a user can view all tasks. Need a way instead that they can view only their own tasks, for example a permission called 'View own tasks'.

If 'View own tasks' is checked for a user, in the project list we should only show projects which contain tickets that that user is a part of. Within a given project we should then only show tickets that the user is a part of if they have that permission set.

So for example if 'View tasks' is set, show user all tasks. 'View tasks' is not set, but 'View own tasks' is set then show them only their own tasks and projects.

Well, it needs a cleanup, per example:

fixed now http://127.0.0.1/flyspray/task/3?project=1

That should be something like:

• http://127.0.0.1/flyspray/project1/tasks/3 (project id not needed, Flyspray knows it from task data)
• http://127.0.0.1/flyspray/task/3

The actual one is actually half a rewrite and half a GET version

Should have a page that is a users profile page. so clicking in that users name on a ticket takes you there and you can see what bugs are assigned to them, what they have commented on, and other info about them and about their activity.

Ability to click field to edit ticket

TODO: return handler if request ok or fail.

TODO: also clicks on label should trigger show form.

Maybe the whole “click to active for editing this field” to one click too much.
So if the user has the rights to edit the value the form input or action button should be shown when viewing a task.
All other people just see the value if they have the right to view the value.

Tags can only be added on the “new task” page, not managed on the “edit task”-page. done

• The information when a tag is added or removed and by whom logged through flyspray_history table is still TODO.
• The information when a tag is added by whom is visible when hovering over it in the task details view
• Tags are now also searched by the submitted search string when doing a task search.
• In addition to the project level ‘free tagging’ which allows users create new tag names there exists also a use_tags permission per project. This is currently only used on some of the appropriate locations.

I think the button advanced search button should not be placed right beside seach input field as full button.

Maybe a small down arrow under the simple search form with a horizontal line and a title tag as tooltip.

Any comments?

Integrate the selectpure javascript to the new task and edit task form.

By default there is a text field where tag names are separated by ‘;’ character.

Selectpure could instead show the tags with their visual layout with a little ‘x’ inside on the right side for removing a tag and autocomplete when typing a tag name to show existing tags from the flyspray_list_tag-table as possible selections.

Instead implemented a CSS and raw javascript solution with a single taghelper.js without any dependancies.

A button beside the tag input text field toggles a list of available tags for the current task, depending on the project and settings.

Still TODO

Any form should have its submit button directly below and to the right of the form.

This is most egregious on the New Task page where you have to scroll back up to the top right to submit.

The installer requests a password for the admin account, and provides a default one.

Because this field is not type=”password”, the browser caches this data for any field named “admin_password”

This also applies to future installations of the software.

I have marked this as critical as this can pose a security hazard. A different implementation would be allowing entry of password, or in the case of wanting to provide a default one, have two password fields prepopulated, and a text one prepopulated so that it can be viewed by the end user.

Hello,

I wanted to request a feature that will DRAMATICALLY increase the popularity and the usage of flyspray worldwide which is :

One click signup

This can be done by using existing signup solutions like openID, live.com, Google, Facebook ,twitter, Yahoo, gravatar (these are the most universal according to http://www.alexa.com/topsites)

The goal is to give a new user the possibility to sign up in less than 15 sec (and mention this in the signup page)

Pretty minor, but seems to show up regularly enough in our logs. The line in question:

$outfile = str_replace(' ', '_', $tasks[0]['project_title']).'_'.date("Y-m-d").'.csv';

You cannot select the fields for export to csv. This means that the commentfield (edit: you mean task description, right?) is always exported too. As this commentfield task description (?) could contain quotes, comma’s etc (like people inserting copies of emails on an issue) it corrupts the output file and the file cannot be read by excel.

/index.php?do=admin&area=prefs

There’s a checkbox on this menu to toggle whether admins get notices for new user registrations or not. Ours is off, but I’m still getting those notices.

Both is a bit illogical, but both is currently possible!

1 ←- 1

So when setting the parent task id checked for creating loops is needed:

Loop with 2 tasks: 1 ←- 2 ←- 1

Loop with 3 tasks: 1 ←- 2 ←- 3 ←- 1
Loop with n tasks: 1 ←- ... ←- n < – 1

As I think there are currently no recursive reads that could lead to an endless loop, but should be kept in mind when someone wants to programm rendering a gantt chart.
E.g. by limiting the depth of subtasks for example.

Notice: Only variables should be assigned by reference in /*/setup/index.php on line 883 
Notice: Only variables should be assigned by reference in /*/setup/index.php on line 949

The HTML accesskey attribute feature is differently accessible dependent of operating system, web browser and web browser configuration, and users keyboard layout and user language.

By taking advantage of the User-Agent HTTP header value provided by default by web browsers, Flyspray could better know of what kind of keyboard and browser the user sits in front off and show the key combinations for the accesskey feature that best fits the users environment.

Keyboard navigation is not documented

grep -r 'accesskey' *