Flyspray - The bug killer!

This is the Bug Tracking System for the Flyspray project. This is not a demo!

2019-04-22: Flyspray 1.0-rc9 released See https://github.com/Flyspray/flyspray/releases

ID Category Task Type Severity Summary Status Progress  desc Assigned To Due In Version Opened Last Edited
2142Backend/CoreBug ReportLowPost-authenticate redirect does not make use of baseurl...Unconfirmed
0%
28.06.201601.08.2016 Task Description

I run flyspray behind a reverse proxy with the front end url being https and with the actual back end server not being on a standard port and not using https.

Setting force_baseurl seems to sort most areas with flyspray’s url generation using that instead of picking up from $_SERVER, however post-authentication redirection does not do that it just processes redirect_to as is (which in my case means it picks up the protocol, name and port for the back end server rather than what’s set in force_baseurl).

./themes/CleanFS/templates/loginbox.tpl puts out $_SERVER[’REQUEST_URI‘] into a hidden redirect_to input field - on my setup on the front page that’s e.g. “/” or for a ticket url it would be “/index.php?do=details&task_id=999” so no protocol or hostname.

scripts/authenticate.php picks up that redirect_to value and just passes it to Flyspray::Redirect, which in turn calls FlySpray::absoluteURI on what it’s passed, and FlySpray::absoluteURI doesn’t use $baseurl to qualify the url.

Not sure what the best fix is - my suggestion would be that Redirect detects urls that aren’t fully qualified and adds the $baseurl on to the front of them, rather than calling absoluteURI (absoluteURI is used to set $baseurl if force_baseurl is unset, so that’s not appropriate to modify). Alternatively scripts/authenticate.php could check redirect_to and add $baseurl if needed.

2160Backend/CoreBug ReportLowCannot "accept" PM close request if already closedUnconfirmed
0%
14.07.201614.07.2016 Task Description

If a task creator requested closure, and someone (developer) closes the task explicitly, the PM request cannot be later ‘accepted’ and the PM request remains in the queue.

Workaround - Deny request and queue item is removed OK.

It looks like the PM request button invoked details.close which returns early if task is already closed.

2188Backend/CoreBug ReportVery LowIt should not possible to relate a task to itselfNew
0%
01.08.201601.08.2016 Task Description

Flyspray should show a warning, and maybe set the focus back to the field (only when it is a this-one-field-only-form.)

2197Backend/CoreBug ReportHighChange Time for everyoneUnconfirmed
0%
121.08.201622.08.2016 Task Description

Flyspray does not recover the time set in php.ini. On display, the system has two hour delay.

2198User InterfaceBug ReportLowMulti-Select from tasklist offers options to those who ...Unconfirmed
0%
1122.08.201622.08.2016 Task Description

When viewing a project via the tasklist, there are a series of checkboxes available. If a user in a group with “modify own tasks” checks a box on a ticket - no matter who actually owns it - they are given a list of options to change it with.

This should not happen. The checkboxes should only be available from the tasklist if the user can actually edit the tickets they’d be next to.

//imgur.com/a/JwORB

2200User InterfaceBug ReportMediumIncomplete list of timezones available in the user pref...Unconfirmed
0%
26.08.201626.08.2016 Task Description

The user preferences and the add new user screens both allow you to set the timezone offset of the user, however, we are only provided with whole hour offsets from GMT. This makes it impossible to select our timezone here in India, which is GMT+5:30 - IST(Indian Standard Time - Asia/Kolkata as per TZ Zoneinfo). In addition, there are also timezones in the GMT+x:45, which wouild also require to be handled. Note, this is totally independent of DST Changes, since some of the countries use DST(Like in Australia) and others do not(Like India).

Here is a link with more details of the same - http://www.timeanddate.com/time/time-zones-interesting.html

I will be trying to identify and fix the codebase to resolve this, and will hopefully have a patch to submit soon.

Regards
R. K. Rajeev

2201APIBug ReportHighI got Fatal Error on the Github OAuthUnconfirmed
0%
1.0107.09.201609.09.2016 Task Description
Fatal error: Class 'League\OAuth2\Client\Provider\Github' not found in /html/bugs/includes/GithubProvider.php on line 11

I have downloaded this:
Precompiled with 3rd party libs for PHP5.6: flyspray-1.0-rc1_php56.tgz
and the file seems really dont exist.

2202Installer and UpgraderBug ReportHighUnable to upgradeUnconfirmed
0%
310.09.201611.10.2016 Task Description

I tried to upgrade from 0.9.9.7 to 1-0-rc1 but I end in an infinite redirection loop

I tried to use the github version, to change the domain name (hosted in dreamhost), to use/not-use the .htaccess, upgraded the version of php from 5.5 to 5.6, to change all the settings in the flyspray.conf.php file, but still having the error after to perform the Upgrade task and removing the setup dir

Used the prepacked dependencies since i cannot install them in this server

Thanks
Thanatermesis

2207Backend/CoreBug ReportHighNonpublic project titles and project description exposi...Confirmed
0%
1.0123.09.201629.09.2016 Task Description

When a anonymous user tries to display a ticket of a non public project (for example by entering a random ticket id), Flyspray exposes the title of the non public project in the header bar.

Edit by peterdd: also applies to project description

2215Text RenderingBug ReportLowwrong output of Geshi syntax highlighting for xml codeNew
0%
117.10.201631.12.2017 Task Description

Geshi 1.0.8.17 from https://github.com/easybook/geshi is quite slow at the current integration of Flyspray v1.0-rc3 on the first run. (But any further read uses the cache.)

But it produces garbled output for xml code highlighting:

Example without xml, just format as preformatted code:

<table>blabla</table>

Or as php syntax highlighting (even if it doesn’t contain a real php-tag ;-) ):

<table>blabla</table>

Example with xml choosen as language:

blabla

The table tag is stripped away instead of converting the tag for output inside code/pre tags (by converting the < and > chars). Maybe just a configuration issue?

2223GreekBug ReportVery LowSome strings need splitting or replacementUnconfirmed
0%
2124.10.201625.10.2016 Task Description

There is a conflict in meaning in some words. In English past tense (”he closed the task”) and past participle (”List of closed tasks”) is the same word. But in Greek they are two different words (past tense of close: έκλεισε, past participle of close: κλεισμένος/κλεισμένη/κλεισμένο/.../etc → (actually, past participle has 3 genders (male/female/neutral) x 2 grammatical numbers (singular/plural) x 4 grammatical cases (nominative/genitive/accusative/vocative)) = 24 combinations but we’ll deal with this later if needed).

So, strings that now are used both as past tense and past participle, or used both for singular and plural, must split and use a different string when past tense and a different string when past participle or singular/plural.

These strings are:

varvaluenotes
openedOpened It is used in Event log as past tense (meaning: “User X opened Y task” or “Y task was opened by X” → so in Greek must either use past tense or past participle as singular because it’s one task) and it is also used in Overview as past participle (meaning: “List of opened tasks” → so in Greek must use plural). On the other hand, the same message in task’s History uses var taskopened=”Task opened”. Maybe it would be best if var taskopened was used in Event log too instead of var opened. It would solve my problem.
closedClosed (same as above)
editedEdited (same as above)
2224GreekBug ReportVery LowSemicolon is a bad separatorUnconfirmed
0%
1124.10.201625.10.2016 Task Description

The symbol “;” in Greek is the question mark. So a list of semicolon-separated values looks like a series of questions in Greek. (looks like this: “cat? dog? rabbit?” ;-))

I suggest replacing semicolons with commas as list separators.

In email lists space is good choice too.

2304Database QueriesBug ReportMediumGreek letters crash tagsConfirmed
0%
126.10.201626.10.2016 Task Description

When adding a tag in Greek letters (e.g. “Δοκιμή”) I get:

Query {SELECT tag_id FROM `flyspray_list_tag` WHERE (project_id=0 OR project_id=?) AND tag_name LIKE ? ORDER BY project_id} with params {5,Δοκιμή} Failed! (Illegal mix of collations (latin1_swedish_ci,IMPLICIT) and (utf8_general_ci,COERCIBLE) for operation ‘like’)
2309User InterfaceBug ReportLowPHP noticed displayed on default "All Projects" page.Unconfirmed
0%
302.11.201626.11.2016 Task Description

I am seeing some noticed on the front page of our tracker install that were not present prior to updating to 1.0rc3.

Notice: Undefined offset: 1 in <redacted>/scripts/index.php on line 202 Notice: Undefined offset: 2 in <redacted>/scripts/index.php on line 202

It’s displaying the full path to the files on the page.

There are effectively 2 issues here. One is that some kind of error is kicking up. Second is that it’s being shown to anyone who visits the site.

2315Backend/CoreBug ReportLowFiling a new task is possible with no details in the ma...Unconfirmed
0%
21.11.201621.11.2016 Task Description

When filing a task, it’s possible to submit the task without any information at all being added to the main body of the ticket. This leads to reports that are of no value because the user can simply add some vague title, hit submit, and then wonder why nothing happens other than someone closing it later as invalid.

The main body of the ticket should be considered a required field and should throw an error if nothing is in the box.

2316Backend/CoreBug ReportLow"wrongtoken" is displayed if the comment box is left si...Assigned
0%
peterdd7122.11.201629.07.2019 Task Description

I understand this is likely due to some sort of XSS CSRF protection, but the delay doesn’t appear to be long enough to be useful for a lengthy comment to be posted. I’ve now lost two detailed comments in our tracker because the software threw everything out and generated a meaningless error.

Further, attempting to do the normal thing and making the browser resubmit the page results in Flyspray throwing “Error #3” something something repeated action and causing a redirect to the homepage.

Surely there has to be a better way to handle this that doesn’t incur data loss?

2319Installer and UpgraderBug ReportHighUpdate failed with "invalid byte sequence for encoding ...Unconfirmed
0%
223.11.201609.12.2016 Task Description

I’m trying to upgrade from 0.9.9.7 to 1.0-rc4 but the Upgrader stops with this message:

Query {UPDATE "tasks" SET detailed_desc = ?WHERE task_id = ?} with params {,400} Failed! (ERROR: invalid byte sequence for encoding "UTF8": 0xc3 0x3c)

Ubuntu 14.04.5 LTS
PostgreSQL 9.3.10

2332Backend/CoreBug ReportMediumCSV export filename filteringNew
0%
224.01.201724.01.2017 Task Description

The filename for the csv export is build based on project name and current date.

Due different handling of web browsers, the appropriate http header should send the filename in ascii and also provide them as utf-8 for web browsers who can handle that.

Related RFC5987

2336Backend/CoreBug ReportHighCaptcha validation always fail on registrationUnconfirmed
0%
1301.02.201721.07.2018 Task Description

Correct or wrong code return false!

The results of Securimage Test Script on my server

This script will test your PHP installation to see if Securimage will run on your server.

Session Functionality: Yes!
GD Support: Yes!
GD Version: bundled (2.1.0 compatible)
imageftbbox function: Yes!
TTF Support (FreeType): Yes!
JPEG Support: Yes!
PNG Support: Yes!
GIF Read Support: Yes!
GIF Create Support: Yes!
SQLite Support: Yes!
SQLite is available. If you choose to use it, Securimage can support users who do not accept cookies.
MySQL Support: Yes!
MySQL is available. If you choose to use it, Securimage can support users who do not accept cookies by storing codes in MySQL.
PostgreSQL Support: No
No PostgreSQL support.
LAME MP3 Support: No
LAME was not found, audio will work in WAV format, but not MP3. See Securimage HTML5 audio documentation for info.
Your server meets the requirements for using Securimage!

on modify.inc.php line:754 got

if( !Post::isAlnum('captcha_code') || !$image->check(Post::val('captcha_code'))) {
if( true == false || false == false ) {
2343EmailBug ReportMediumNotification mailUnconfirmed
0%
214.02.201715.02.2017 Task Description

Good Morning,

I have this message error when I want configure SMTP Server :
Completely unexpected exception: Connection could not be established with host 192.168.0.10 [Permission denied #13]
This should never happend, please inform Flyspray Developers

My flyspray installs on CentOS v7. Postfix installs on the server but I don’t configure anymore.

Can you help me please

Julia LECLERC

2345Text RenderingBug ReportLow<hr> should be in allowed tagsUnconfirmed
0%
220.02.201723.02.2017 Task Description

Because the hr tag is allowed in the new html comment editor it should be also allowed to display it in the ticket description.
class.tpl.php:875 –> just add it here

2436Backend/CoreBug ReportLowdokuwiki renderer creates nonunique html-id for h1,h2,h...New
0%
202.08.201702.08.2017 Task Description

The dokuwiki renderer automatic creates for each h(1-6) tag an html id attribute, but doesn’t ensure that this:

  • is not used by Flyspray templates
  • is unique across all tasks (tasklist summary/description mouseover!), id must be unique on a webpage.

Example: id=”footer” and id=”title” are used by the default CleanFS template for example.

id=”footer”

title

id=”title”

title

id=”title1”

title

id=”title2”

The original intention I think is to make dokuwiki content each h-section linkable, for instance by a “table of contents” at top of a wiki content page.
This is currently not used by the dokuwiki integrated in Flyspray, but could be in future.

Possible solution

Add the task_id to the generated id h(1-6) tags, for instance “d1234_footer” “d1234_title”

d - like description

(t1234 used for tags/labels id currently)

2441Backend/CoreBug ReportMediumrefactor dokuwiki image tagsNew
0%
15.09.201715.09.2017 Task Description
I’ve tried inserting an image in the intro message but it doesn’t show. Is there something broken in the formattext.inc file? Seems unlikley because it’s so old but can’t work out why nothing shows.
Alan

I had to disable some parts last year within dokuwiki quickly due sever reported security issues in that area.

As tradeoff embedding images currently don’t work within dokuwiki textareas in Flyspray.

As I too wish that feature reappear working for my projects, this is on my personal list. But requires focused free time because must be made secure.

Maybe instead of using fetch.php of dokuwiki, we can use Flypsray’s ?getfile=id , which also checks permissions.
But must check also securly file types and maybe resize images to fit into the desired page (thumbnails).

2448Backend/CoreBug ReportLowerror message in eventlog reportsUnconfirmed
0%
226.10.201729.10.2017 Task Description

The last version of Flyspray is simply amazing! it works like a charm :)

This is a small bug report in the eventlog page, that shows this message:

Notice: unserialize(): Error at offset 237 of 808 bytes in /home/elivebugs/bugs.elivecd.org/themes/CleanFS/templates/reports.tpl on line 88 Notice: unserialize(): Error at offset 229 of 796 bytes in /home/elivebugs/bugs.elivecd.org/themes/CleanFS/templates/reports.tpl on line 88

There’s a small screenshot: http://main.elivecd.org/ss/display.php?image=e-59f2541a445543.02125094.jpg

Thank you!
Thanatermesis

2453Backend/CoreBug ReportMediumvalidate category before storing a new taskNew
0%
1.014.12.201714.12.2017 Task Description

Currently the category_id is not checked if the value is legal for the project when a new task is created.

  • must be unsigned int
  • must be an active category_id of the project or global category.
  • setting a category_id must be allowed - see project settings.

If invalid category_id is sent, deny creating task and show error message and show filled form again.

If no category_id is sent (or empty string) and category select is enabled:

  • either choose a default category

or

  • implement feature request FS#2451 and show that user should select a category.
2454Backend/CoreBug ReportLowPHP warning in admin edit user areaNew
0%
15.01.201815.01.2018 Task Description

Since PHP7.2 shows a warning in admin area ?do=admin&area=users&user_id=1234567890, when user_id is set, but no alternative user_name parameter.

Probably related to scripts/admin.php

$id = Flyspray::UserNameToId(Req::val('user_name'));
if (!$id) {
  $id = Req::val('user_id');
}
2491Backend/CoreBug ReportLowgroup member links if project manager but not adminNew
0%
1.001.09.201801.09.2018 Task Description

When a user has project manager permissions, but not admin permissions, then on the ‘edit group’ pages like index.php?do=pm&area=editgroup&id=8
the links in the list of users of that group are

index.php?do=admin&area=users&user_id=12345

instead of linking to the users page

index.php?do=user&area=users&id=12345

and a redirect follows with Error #4: You don’t have administrative rights.

2496EmailBug ReportLowNotification Mail - Link to the task invalid when quick...Waiting on Customer
0%
213.09.201814.09.2018 Task Description

Hello,

I’m having an issue on the notification’s mail sent to people when quick-editing a task, more precisely on the link to the task below.

I had this in my older mails :
mybugtracker.com/js/callbacks/index.php?do=details&task_id=xxxx

I “corrected” it by adding a str_replace here (see my screenshot), and now it’s good.

Thank you

2499User InterfaceBug ReportHighChange recaptcha from using file_get_contents to CurlUnconfirmed
0%
118.09.201802.11.2018 Task Description

The issue with many servers now and the reason that recaptcha does not work is because it requires servers to enable allow_url_fopen which is a huge security risk. That is why you get the warning message when you try to run recaptcha that file_get_contents failed to connect.

So the solution is to use Curl to do that job.

Here is the fixed file, excuse my mess i had not cleaned up my code yet... but recaptcha now works.

this file goes in the includes dir... you can clean up the file if you like again sorry about that.

2527Backend/CoreBug ReportLowDatabase Check »Your mysql supports full utf-8 since 5....Unconfirmed
0%
105.01.201905.01.2019 Task Description

Steps done to create the problem:
Access /index.php?do=admin&area=checks with a MySQL Version >= 5.5.3

Expected behavior:
Flyspray tests for character set and displays »Your mysql supports full utf-8 since 5.5.3. You are using x.x.x and flyspray tables could be upgraded.« when database schema or one table isn’t set to utf8mb4 character set.

Experienced behavior:
Flyspray always shows this note, even though character set is correct.

As far as I can tell from the source, a query gets executed to the database (and if I do that manually the result is “utf8mb4, utf8mb4_unicode_ci” for my database), but the result doesn’t get checket, the note is always shown (line 123)

2544EmailBug ReportLowError when registering new accountUnconfirmed
0%
123.03.201923.03.2019 Task Description

I installed the developer edition.

mysql Ver 14.14 Distrib 5.7.25, for Linux
PHP 7.2.15-0ubuntu0.18.04.1
Ubuntu 18.04.2

Admin settings → Allow users to register and send conf. email.

I DID set up email settings thru google and sent a test email. it did work.

After logging out, I tried to register a new account. I filled in details and got the following error:
Completely unexpected exception: Expected response code 250 but got code “530”, with message “530 5.7.0 Must issue a STARTTLS command first. u13sm3937813iog.80 - gsmtp "
This should never happend, please inform Flyspray Developers

Obviously, the confirmation email was never sent.

I am going to try to manually add a new user. Will update with outcome.

2549User InterfaceBug ReportLowOauth register template always shows "Username already ...Unconfirmed
0%
06.05.201906.05.2019 Task Description

RC9 running on CentOS LAMP stack

Steps done to create the problem:
Set up google as an oauth provider.
Have a user click “Sign in with Google” in the login box.
User connects their account with Flyspray.
Google redirects the user back to Flyspray
The return screen (on flyspray) asks for a username.

Expected behavior:
No warning about duplicate username should be shown on initial page load since no username was entered yet

Experienced behavior:
A warning about the username being already taken is shown.

It appears there is no logic for showing or hiding that warning in register.oauth.tpl

(It would be great if flyspray was able to just use the email as a username to make the UX even better/simpler.)

2550EmailBug ReportLowException handling sending email notificationUnconfirmed
0%
06.05.201906.05.2019 Task Description

Someone reported this:

Today i tried to report an issue about xxx on the xxx (namely xxx) and the following error message has been displayed:
Completely unexpected exception: Expected response code 250 but got code “451”, with message “451 Error in writing spool file "
This should never happend, please inform Flyspray Developers
The issue itself has been created though.
2552EmailBug ReportHighEmail TLS error (was 'Mail Adress encryption')Unconfirmed
0%
130.05.201931.05.2019 Task Description

Official release

Steps done to create the problem:
Insert correct (tested with gmail) data into the notification tab and click on “Test”

SSL and TLS are checked.

Expected behavior:
Send test email and confirm it.

Experienced behavior:
Following error message

Error message:
Warning: stream_socket_enable_crypto(): Peer certificate CN=`*.netcup.net’ did not match expected CN=`mail*.netcup.net’ in /var/www/vhosts/.netcup.net/httpdocs/**/flyspray/vendor/swiftmailer/swiftmailer/lib/classes/Swift/Transport/StreamBuffer.php on line 103 Completely unexpected exception: Unable to connect with TLS encryption
This should never happend, please inform Flyspray Developers

2559Backend/CoreBug ReportLowa duplicate close accepted even when missing comment/ r...New
0%
peterdd29.07.201929.07.2019 Task Description

Closing a task with selected close reason duplicate should warn when there is no comment or FS # id is given in the close comment text field.

The task is closed as duplicate without any further notice. The information to which task it is duplicate or a description (if the problem is logged/handled outside Flyspray) is lost.

Possible solutions

Frontend hints

  • variant F1 (soft): When duplicate as close reason is selected, a placeholder attribute in the close comment text field could be shown/updated. (maybe as ‘css only’ possible)
  • variant F2 (harder): Deny sending the form if duplicate selected, but comment text field is empty. and shows warning info. (javascript required, nojs browsers still send form.)
  • variant F3 (hard): Deny sending the form if duplicate selected and no task id detected in comment text field. and shows warning info. (javascript required)

Backend deny

  • variant B1 (soft): When request wants close a task with duplicate reason and (cleaned) comment string is empty, deny closing the task and give feedback to user why it was denied.
  • variant B2 (hard): It requires detecting a task id in the comment field and the first detected task id is taken for referencing as ‘is duplicate of’. Limitation of this is that the duplicate could be also a ticket or something of a complete other system.
2560Backend/CoreBug ReportLowdo not allow close task with reason duplicate referenci...New
0%
peterdd29.07.201929.07.2019 Task Description

So closing a task

FS#1

with

reason: duplicate

and close comment

FS#1

referencing to self should be detected to avoid such user mistakes.

407Backend/CoreFeature RequestMediumPlugin systemConfirmed
0%
2.0261404.12.200417.01.2013 Task Description

Everything is currently hard-coded. Create a plugin system that allows a module to be simply "dropped into" a plugins/ directory, enabled in the options, and have the plugin just work.

Possibilities might include alternative methods of notification, perhaps a documentation subsystem, or even simple things like voting for tasks.

The user should NOT have to edit existing Flyspray source code to make a plugin work.

920User InterfaceFeature RequestLowCharts (gantt, severities, OSes, opened-closed, ...)Researching
0%
2.017806.05.200618.07.2015 Task Description

With all informations on flyspray, it's possible to generate a gantt chart.
For this, some php code exists :
- http://www.aditus.nu/jpgraph/
- http://www.graphviz.org/
- http://www.phpclasses.org/browse/package/2737.html

1134User InterfaceFeature RequestLowadd icon/image for each projectPlanned
0%
1.1 devel7329.11.200609.03.2015 Task Description

When we have several projects into flyspray, it's hard to see the project where I am when I add several tasks.
It's necessary to read the text.

To improve this, I think that it's a good idea if it's possible to add a color or an image with the logo project next to project title into web page. It will more simple to know where we are when we use flyspray.

1222Backend/CoreFeature RequestMediumWorkflow engine / Role-based State Transition Rules Eng...Unconfirmed
0%
11625.03.200705.05.2019 Task Description

I have been working with Eventum (http://www.mysql.org/downloads/other/eventum/) for quite sometime now and in contrast, I like Flyspray for its simplicity and practicality. But one thing I badly miss (and something that Eventum scores high) is a Workflow Engine. If not a sophisticated W.E., I (as an Admin / Manager) should be able define role-based state transition rules of the tasks reported in a particular project. For example, I should be able to implement the following scenario:

  1. For a “Developer”, the subsequent tasks from various states. Likewise for other roles
  2. “Developer” should not be able close out the bug reports. He/she can only flag them as implemented. The “Reporter” of the bugs or the “Manager” alone should be able to close out issues
  3. ..
  4. .. it will go on like that ;-)

This feature, in my opinion, is very crucial for corporate organizations to give a serious consideration to Flyspray.

1236User InterfaceFeature RequestLowMark Issue As Verified or UnverifiableUnconfirmed
0%
3409.04.200718.07.2016 Task Description

Currently, the Vote functionality provides users a way to say "this issue is important to me". In addition to that functionality, it would be great for users to have a "Verify" ability on open issues; it would provide users a way to say "yes, this happens to me as well".

A "Verified" label would fit nicely right under "Votes", to the right of the label would be "Yes | No", each option being a link. After clicking Yes or No, or if unable to specify (lack of permissions), the text would display "Yes - # | No - # (% verification)" where '%' is the result of ((Yes/(Yes+No))*100).

This feature should not show up on all issues, though. It does not make sense to "verify" a feature request or todo item, for example. When defining task types, the administrator would specify if a type was "Verifiable" by checking a box in a column next to "Show".

If implemented, two great, mini extra features would be:

  1. The ability for the administrator to set the number of "Yes" verifications an issue would need before it was elevated to the next priority, severity, or both (specified by the administrator).
  2. The ability for the administrator to set the number of "No" verifications an issue would need before it was lowered to the previous priority, severity, or both (specified by the administrator).

Both settings should have an option to be incremental (priority / status increased every x verifications) or not (increases once, no matter how many verifications are received); an "Incremental" checkbox would do nicely. Also, a little "Enabled" checkbox next to both settings would be clearer than having zero act as the disable mechanism.

As with voting, a permission should exist to enable or disable this option for a user group. For larger projects, moderators tasked with verifying bugs could be given the permission whereas smaller projects may leave verifications up to the community.

Lastly, a way to send a notification once the number of "Yes" verifications reached a certain value would also be a great addition.

1237Backend/CoreFeature RequestMediumAllow Multiple Owners Per CategoryPlanned
0%
2.04709.04.200710.08.2015 Task Description

Currently, only one owner can be applied per category (at least, that's what the tooltip implies). The ability to add more than one user, a user group, or a mix of the two to a category would be ideal.

Often times, more than one programmer will work on and maintain a feature that cannot be divided into subcategories with the various programmers dispersed accordingly. In such cases, setting all such programmers as owners of the category is beneficial in that they will all receive notifications.

Also, having a parent category's owner receive alerts if no owners are specified for a sub-category benefits from this ability. I may have a "User Interface" group that has all of my UI developers in it; assigning the group to the "User Interface" root category means all relevant developers find out about a new issue that was not directed elsewhere.

One potential conflict does arise with another Flyspray feature. If "Auto-assign a task to the category owner" is enabled, care must be taken to assign no users or the first user to the task; personally, I would prefer no one being assigned and seeing the wording changed to "Auto-assign a task to sole category owners". Worst case scenario would be another option asking if no one or the first user would be assigned to a task in that instance; if a group is specified, the first user in the group would be chosen.

1481User InterfaceFeature RequestLowDiff visualisationUnconfirmed
0%
4104.05.200809.03.2015 Task Description

Flyspray should be able to render attached patches visually like, for example, Bugzilla: https://bugzilla.wikimedia.org/attachment.cgi?id=4807&action=diff

1485User InterfaceFeature RequestLowAdditional extended Printview for the TasksPlanned
0%
2.013.05.200811.03.2015 Task Description

It would be useful to print a list of tasks in a extended version.
e.g. All tasks from a programmer with all the details of it.

1491User InterfaceFeature RequestLowCustom task table columns for individual usersUnconfirmed
0%
2.0301.07.200801.10.2015 Task Description

Allow individual users to define custom views of the task tables much like the project manager can for the entire project; only on a user scale.

An option for the user to "use default" project settings should be possible and should be the default.
Only pro users will change it to their needs, not the average reporter.

Interesting would be the possibility to change it dynamic on the tasklist view, not only on the myprofile setting page.

Open Question: Simple or complex implementation?

  • Simple: A new varchar field for the user table like it is in the project table and provide the same field chooser like on project setting page.
  • Complex: User settings for global tasklist view and each project. Needs extra 'project_user' (or 'user_project' ;-) ) join table. Well, maybe over engineered.
1518NotificationsFeature RequestLowShow last date/time when a reminder was sentUnconfirmed
0%
15.11.200815.11.2008 Task Description

This information is already stored in the table "reminders" in field "last_sent". It might be helpful in some situations, if this date/time would be visible to the user on the reminder list, too.

1521Backend/CoreFeature RequestLowAssignees should be able to see and create reminders fo...Unconfirmed
0%
22.11.200818.04.2009 Task Description

In version 0.9.9.5.1 (unfortunately I couldn't select this version in the dropdown list on the left), reminders can only be created and edited by Admins and Project Managers. I recommend to give Assignees the permission to create reminders for themselves. To minimize any programming impact, his may be done as part of the "edit own tasks" permission.

This topic has been reported by Engie as part of Bug #713 for version 0.9.8 as well: "Also it would be useful if a user could create reminder for himself." Although that bug is already closed ("fixed in devel"), this part is not yet solved in the current version.

1539Backend/CoreFeature RequestLowSitemap.xml GenerationUnconfirmed
0%
2.12112.01.200911.03.2015 Task Description

I would like the feature to have a sitemap.xml file be generated, say every xx days, set in the configuration.

1599User InterfaceFeature RequestLowImplement "Tasks not blocked by other tasks"Unconfirmed
0%
2.1111.08.200903.03.2013 Task Description

In the advanced search, there is "Tasks not blocking other tasks"

Implement a related: "Unblocked tasks" (i.e. Tasks not blocked by other tasks)

1612Backend/CoreFeature RequestLowAllow Comments by anonymous UsersUnconfirmed
0%
2.02120.10.200917.01.2013 Task Description

I would love a option to allow anom users to write comments! Maybe with CAPCHA...
I allow anom users to report bugs, but when I have a question to this bug, or the reporter wants to make a additions, he has to register...

I tried hacking it in the core: In the class.user.php at the end of the get_perms method I added:
$this→perms[$proj_id]['add_comments'] = 1;

But I has nothing changed. The I removed the check if the user had the right to make a comment in the template file, now I have a comment field for everyone, but anom user get a error message saying, that they should enter a comment... I searched a lot in the core files, but I don´t find the point where the comment a written in the database... I would a great help if you could give at least a hint :)

Another thing i tried was changing the user contructor, that every user with a negative ID get the ID 2, witch is a special "anom" user. But then you could not log out, a the admin not in...

Here the link to my site: bugs.thekingdomofdarkness.de

Showing tasks 101 - 150 of 293 Page 3 of 6 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing