Hi

So I figured out that there are no color coding options (to set text color and background color) for text in the CKEDITOR. I did some changes to CKEDITOR to add those, however, once I submit the text, it does not retain the changes.

Is there a particular reason why these are not enabled in the first place?

I am thinking it would be good add these, so that we can make the important text pop-out to the users.

- Raju

Problem: By replacing just the project_id of the closed task it is possible the task then has invalid field values within the target project.

Possible scenarios:

1. Ignore invalid values within the target project
   • Pro: Easy to do, an immidiatly revert back to the old project would “heal” the task properties.
   • Contra: may effect accuracy and reliability of other parts like searching, listing, statistic calculations
2. Silent change task field values to valid field values of the target project if necessary
   • Pro: relative easy to do
   • Contra: a bit loss of information, little side effects
3. allow user to modify the fields that must be changed so that every field of the task has valid values within the target project
   • Pro: accuracy
   • Contra: a bit loss of information(fallback to default values) if there are no similiar field values selectable within the project
4. allow user to modify the fields, fields or field select values that do not exists in target project will be automatically created.
   • Pro: accuracy
   • Contra: target project may be cluttered with too many fields/field values
5. ???

Sometimes the emailing fails for a while with the message:

Completely unexpected exception: Expected response code 250 but got code “550”, with message “550 Bad HELO - Host impersonating domain name [mysite.nl] "
This should never happend, please inform Flyspray Developers

It useually simply works so actually I don’t know if it’s a flyspray issue or a hosting issue...

So, I’ve been away from Flyspray for more than a few years. When I tried to login to the Flyspray here, I was unable to login, because I don’t remember my username, and I was unable to retrieve my username, because there’s no function for that. I was *also* unable to re-register the same email address. SO, having an account system that requires both unique usernames and unique email addresses, but has no way of retrieving one from the other, doesn’t work out so well.

Suggestion: either use email as username, or add a function to retrieve username (perhaps along with password retrieval . . password retrieval would then have to take username -or- email, probably)

Official release

Steps done to create the problem:
Insert correct (tested with gmail) data into the notification tab and click on “Test”

SSL and TLS are checked.

Expected behavior:
Send test email and confirm it.

Experienced behavior:
Following error message

Error message:
Warning: stream_socket_enable_crypto(): Peer certificate CN=`*.netcup.net’ did not match expected CN=`mail*.netcup.net’ in /var/www/vhosts/.netcup.net/httpdocs/**/flyspray/vendor/swiftmailer/swiftmailer/lib/classes/Swift/Transport/StreamBuffer.php on line 103 Completely unexpected exception: Unable to connect with TLS encryption
This should never happend, please inform Flyspray Developers

Hello,
it is possible to change the layout for notification mails?
I'll put our logo into Mail body and I'll format the text in different font-styles.

Thank you!

My School has blocked me from signing up for the Mailing list, how do I sign up or can you add me?

If effort tracking started by a user on a task, maybe we should add a small widget on the page, so
user sees which tasks are currently running as his own time tracking.

It would be terrific to have a small pop-up window that appears when you click to start tracking of an item. In the window could be:

• the task name
• a timer
• a button to close the timer pop-up and jump to the effort tracking screen, or even to stop the effort timer in FlySpray if possible.

This would help tremendously to remind a developer that he has one or more timers going in FlySpray.

If multiple timers are started, there could be multiple timer windows, each identified by the task name showing as part of the window (title bar or some text near the timer).

Currently only a small portion of adjustements on a task is available in the “edit task” view.

To add or modify stuff in the current tab sections (comments, related tasks, notifications, effort tracking,..)
a user must go from edit task to view task page.

This not optimal for work flow.

To solve this quite much changes are needed. Because currently they are different http requests each with its own checks and request anwsers.

If someone with ‘edit comment’-permission wants to edit a comment, the edit comment form is shown on an extra page.

This is not optimal, because the editor cannot see task details or the other comments while modifying the comment.

Possible Solutions

Hello,

When i put a link in Discord for example, it detects “Flyspray, a Bug Tracking System written in PHP.” as title. How to change it ?

Edit by peterdd: adapted task title/summary to the root of the problem.

When a tasklist contains the duedate column and the user sorts by duedate ascending, the tasks that do not have a duedate set should not be listed first. Instead they should be listed after the tasks with duedates.

This way a user can see the task with the earliest duedate first instead of seeing a bunch of probably not so important tasks without duedates set.

On the roadmap it would make life a lot easier if it was possible to drag and drop tasks into versions.

maybe yet fixed in 1.0 dev, but here bugs.flyspray.org my account is shown twice for selection if u edit a task.

Internally in the form also with the same id, so probably not a big problem.

I registered some years ago, maybe this year jordan(?) added me again or with another email adress? Maybe I have two addresses under on account here, which is a feature, not a bug.

But for the assignee list it should “group by user_id”.

The dokuwiki renderer automatic creates for each h(1-6) tag an html id attribute, but doesn’t ensure that this:

• is not used by Flyspray templates
• is unique across all tasks (tasklist summary/description mouseover!), id must be unique on a webpage.

Example: id=”footer” and id=”title” are used by the default CleanFS template for example.

footer

title

title

title

Possible solution

On some forms, when the user presses the reload button of this browser, the POST submit can be resubmitted.

Browsers can warn about this (Chromium, Firefox, Konqueror tested and they show a warning dialog) before executing the second POST.
But people on Flyspray mailing list wrote they experienced double comments.

Simple solution is just HTTP GET redirects after a successful POST. (HTTP 303 or HTTP 302)
But maybe there is a better method than a second roundtrip always needed?

Success, Error, or Warn-messages to the user are stored in the $_SESSION variable for displaying on the second GET request.
But I think that this is a bit ... mmh... not perfect.

For example, I would like to have in the direct response at which position in a form an input error is, not just the message bar in the top center as it is currently that just dissappear after a few seconds.

Also take care the browser back button still works as expected for the user.

So closing a task

FS#1

with

reason: duplicate

and close comment

FS#1

referencing to self should be detected to avoid such user mistakes.

When a user is deleted from Flyspray, their opened tasks, closed task and task comments are then shown as Anonymous Submitter, the same way as anonymous reporters (not really anonymous, just that user does not have login account, but usually their email address is stored within that task data).

Currently just the entry from users table are deleted when a user is deleted. Their internal user_id integer is still within tasks and comments fields, and maybe some other tables too. So there is not a ON DELETE SET NULL rule or something like that applied. As it is just an autoincremented number by the system, this is not personal data imho and should be no problem for GDPR, but gives Flyspray the ability to distinguish between anon reporters and deleted users. Well, we could also look if there is an email address within task table entry for notification of anonymous reporter, but there are also tasks possible that have no user_id nor an email address.

It might by useful to present that information differently like deleted user or showing the info differently like icon + title-tooltip with explanation.

Also interesting what happens with mentions of a deleted username in a comment or task description. (see FS#2322)

The user isn’t in database, but deleting that now gone user should not modify tasks or comment where that username was mentioned I think.
But what if another user registers under that now gone username? In that case that new user would inherit that mentions. Probably we can ignore that edge case as there will be not much things will happen with an old mention in old tasks/comments.

display_errors = 1 should not set in include/fix.inc.php for releases or releases candidate, because with this it is not possibele to disable the error reporting globaly.

The problem is, if I want to enable full error reporting to logfile via “error_log=…” in php.ini, then the error will also full reported to user. Full error reporting is a hig risk for security.

Did you installed an official release or did you used an inoffical docker?!
flyspray-1.0-rc9

Steps done to create the problem:
Create a file php.in in base directory with follow contens:
error_reporting = E_ALL | E_STRICT
log_errors = On
display_errors = Off
error_log = /var/log/php-flyspray-errors.log

Expected behavior:
Errors only to log file

Experienced behavior:
All errors goes also to user.
The option “display_errors = Off” has no effect.

Currently, if there are no public project, the anonymous users gets a blank page not very useful. It will be a good idea to have a global configuration parameter to display some customizable-page or maybe the login form instead.

It would be nice to have multiple kinds of votes, e.g. yes/no.

It should be made clear to the user what related links are in the
"new task" and "edit task" form and what a user should input in these fields.

Flyspray should be able to render attached patches visually like, for example, Bugzilla: https://bugzilla.wikimedia.org/attachment.cgi?id=4807&action=diff

Some translation keywords of Flyspray are used at more than one code location.

To help translators doing the correct translations, it would help to show in what context a translation keyword is used.
Especially when a keyword is used more than once.

As we have our own translation helper integrated into Flyspray, we could show a ‘translation keyword usage counter’ there and maybe show on request in which file
a translation keyword is used.

It would also help to identify ‘abandoned’ translation keywords that are not used anymore by Flyspray source.

Also it would help to identify when a translation is used at more than one location with maybe different context.

I think we can use a regular expression and scan the whole Flyspray source for that.
(and maybe database entries if there are places that have translation keywords stored - I don’t think so, but better check that too first than forget that case)

The regular expression should match that examples case insensitive for the translation keyword report:

L('report' 
L("report"
eL('report'
eL("report"

but also ugly cases like
l(    'report'
or 
El ( "report"

case insensitive.

But not for example

createURL('report'