Flyspray - The bug killer!

This is the Bug Tracking System for the Flyspray project. This is not a demo!

2019-04-22: Flyspray 1.0-rc9 released See https://github.com/Flyspray/flyspray/releases

ID Category Task Type  asc Severity Summary Status Progress Assigned To Due In Version Opened Last Edited
2121Backend/CoreBug ReportMedium'my assigned tasks' uses like %?% search instead of use...Confirmed
90%
1.0319.04.201603.02.2018 Task Description

Problem: https://github.com/Flyspray/flyspray/pull/552

The button ‘My assigned tasks’ should search only by userid, not in username or realname with the LIKE ‘%...%’ operator.

Currently the button is using the same as doing an advanced search filling the ‘Assigned To’ input field. (currently ‘dev’ param) But that search param searches in userid, username and realname.

Edit: Implemented simpler solution: if param is digitsonly, then search by userid, otherwise by username and realname if that param exists.

1982Backend/CoreBug ReportLowdouble entries in assignees listNew
80%
1.1 devel320.03.201511.02.2016 Task Description

maybe yet fixed in 1.0 dev, but here bugs.flyspray.org my account is shown twice for selection if u edit a task.

Internally in the form also with the same id, so probably not a big problem.

I registered some years ago, maybe this year jordan(?) added me again or with another email adress? Maybe I have two addresses under on account here, which is a feature, not a bug.

But for the assignee list it should “group by user_id”.

2456User InterfaceBug ReportHighMissing GUI controlsUnconfirmed
80%
509.02.201810.02.2018 Task Description

After updating from “1.0-rc6” to “1.0-rc7 dev” there is missing controls menu on writer. Look attachment.
How to solve this?

Is there any settings to enable this or I’m missing something...

1919Backend/CoreBug ReportLowAJAX Quick-Edit on category and task pagesPlanned
70%
1.1 devel3109.07.201407.12.2015 Task Description

Ability to click field to edit ticket

TODO: return handler if request ok or fail.

TODO: also clicks on label should trigger show form.

Maybe the whole “click to active for editing this field” to one click too much.
So if the user has the rights to edit the value the form input or action button should be shown when viewing a task.
All other people just see the value if they have the right to view the value.

1749User InterfaceBug ReportLowSubmit form buttons on lower rightUnconfirmed
50%
117.06.201224.09.2015 Task Description

Any form should have its submit button directly below and to the right of the form.

This is most egregious on the New Task page where you have to scroll back up to the top right to submit.

1978User InterfaceBug ReportLowCompensate degraded usability due added token system an...Confirmed
50%
1.0516.03.201512.10.2015 Task Description

Due to the needed implementation of an anti csrf system into Flyspray 1.0,
this are a side effect issues we need to address:

Due the required replacement of action links to form buttons:

  • The user cannot just see anymore the target url of the action by hovering over the link. We can compensate that in the simpliest case by using the title-tag as additional info to the user. Trust not full reestabilished that way, but better than nothing and user has fear to click a form button.

Javascriptless CSS3-toggles:

  • Some clickable labels don’t show pointer icon when :hover. CSS issue, easy fix.
1988Installer and UpgraderBug ReportMediumPassword Field for AdminUnconfirmed
50%
302.04.201512.05.2015 Task Description

The installer requests a password for the admin account, and provides a default one.

Because this field is not type=”password”, the browser caches this data for any field named “admin_password”

This also applies to future installations of the software.

I have marked this as critical as this can pose a security hazard. A different implementation would be allowing entry of password, or in the case of wanting to provide a default one, have two password fields prepopulated, and a text one prepopulated so that it can be viewed by the end user.

2018User InterfaceBug ReportLowreview keyboard navigationResearching
50%
1.1 devel526.07.201529.07.2019 Task Description

Keyboard navigation is not documented

At least there is no hint in the interface which keyboard shortcuts are available for fast navigation between task list and task details view.

Due to the dropping of the cookie storage for remembering last search or last selected task in favor of not interfering when multiple flyspray browser tabs are open (with e.g. different projects) ,
the caret list browsing with ‘j’,’k’,’o’ and details view isn’t useful at moment.

  1. keyboard based navigation must be documented somewhere, e.g. by providing hints (clickable icon for info or :hover ) at appropriate positions.
  2. navigation flow and technical realisation reviewed for keyboard power users

Edit: Currently handled by js event handler:

  • j move cursor down in task list
  • k move cursor up in task list
  • o open current selected task in task list
  • n next task on task details page
  • p previous task on task details page
grep -r 'accesskey' *

Current accesskeys (browserspecific + key):

  • a double usage for new task and newmultitask. Must hit [Enter] to open one of them; on newmultitask page it adds a new row.
  • e edit task on task details page
  • f copy firstline to the other rows on new multitask page
  • l show loginbox or logs you off
  • m toggle mysearchesbox
  • r reset? when dokuwiki plugin is used
  • s submit when dokuwiki plugin is used
  • w watch/unwatch task on task details page
  • n next task
  • p previous task
  • y close task
2089Backend/CoreBug ReportMediumadding same taskid as subtask or related task should be...New
50%
1.0207.11.201518.11.2016 Task Description

Both is a bit illogical, but both is currently possible! ;-)

1 ←- 1

So when setting the parent task id checked for creating loops is needed:

Loop with 2 tasks: 1 ←- 2 ←- 1

Loop with 3 tasks: 1 ←- 2 ←- 3 ←- 1
Loop with n tasks: 1 ←- ... ←- n < – 1

As I think there are currently no recursive reads that could lead to an endless loop, but should be kept in mind when someone wants to programm rendering a gantt chart.
E.g. by limiting the depth of subtasks for example.

2098User InterfaceBug ReportMediumAttached image cannot be downloadedConfirmed
50%
1.1 devel530.01.201610.01.2017 Task Description

Steps:

- Attach an image to a task.
- It shows as a link in your task (cf. screenshot “Screenshot from 2016-01-29 18-34-31.png”).
- Click on the link.

Result: it opens a “popup” with the image displayed in it. If the image is big, the popup is just so huge the image is not visible without boring horizontal and vertical scrolling (see “Screenshot from 2016-01-30 15-07-26.png” which shows what I see when I click the image link on my task).
I can’t even right click to download from the menu since I see no “Save Image As” item. (see Screenshot-no-save-image-in-menu.png).

My workaround was that if I drag and drop the attachment link in the address bar, I finally get the expected image, which I can finally save as! This workaround was hard to find, and I expect most people will just get frustrated of being able to view an image attachment, yet not save it locally.

I proposes the following:
- a small “download” icon next to the image link in the task for direct download (without preview).
- a “download” link/icon on the top-left of the image display popup (to download while previewing).

And as a side feature (maybe I should make a separate report?), I suggest that by default the image display popup constrains the image to the screen size, with a “see real size” link, so that you don’t get the popup with huge scrolling when opening a big image on a smaller screen.

Note: of course this issue does not appear with non displayable attachment. If I have a zip or a document, it proposes me to download it directly.

2135Backend/CoreBug ReportHigh"Modify own tasks" does not function correctly when add...Confirmed
50%
1.013107.06.201622.08.2016 Task Description

“Oh, there are some incompatible properties set that must be resolved before moving this task to a different project.”

Oh, but I am not moving the task to a different project. Just trying to edit my own submission.

“Edit this task” → “Save details”

See attached screen capture.

2318Installer and UpgraderBug ReportLowsyntax_plugin required when selected ckeditor in SetupRequires testing
50%
323.11.201607.12.2016 Task Description

When choosing HTML/CKEditor on the setup screen you are presented with an error stating that syntax plugin cannot be empty.

This is due to the option value being empty:

<select name="syntax_plugin">
			<option value="dokuwiki">Text/Dokuwiki</option>
			<option value="">HTML/CKEditor</option>
			</select>

A suggested fix is to remove the requirement to select an option (since you have to select one or the other anyway).

2330Backend/CoreBug ReportLowPHP Notice: Undefined offset: 0 in scripts/index.php o...Unconfirmed
50%
423.01.201730.01.2017 Task Description

Pretty minor, but seems to show up regularly enough in our logs. The line in question:

$outfile = str_replace(' ', '_', $tasks[0]['project_title']).'_'.date("Y-m-d").'.csv';
2338Backend/CoreBug ReportMediumExport tasks to csv has issuesUnconfirmed
50%
202.02.201712.03.2019 Task Description

You cannot select the fields for export to csv. This means that the commentfield (edit: you mean task description, right?) is always exported too. As this commentfield task description (?) could contain quotes, comma’s etc (like people inserting copies of emails on an issue) it corrupts the output file and the file cannot be read by excel.

2344NotificationsBug ReportLowAdmins still get noticed for new users even with the op...Unconfirmed
50%
616.02.201724.03.2017 Task Description

/index.php?do=admin&area=prefs

There’s a checkbox on this menu to toggle whether admins get notices for new user registrations or not. Ours is off, but I’m still getting those notices.

2490User InterfaceBug ReportMediumReset Password's Username field has maxlength of 20 - t...Confirmed
50%
1.0201.09.201810.09.2018 Task Description

I’ve set up an account with a username longer than 20 characters, but can’t reset the password because the
flyspray/index.php?do=lostpw
page username field has maxlength=”20” The maxlength for a new user registration seems to be 32 characters.

A related concern is that when setting up the default/admin user on first load of the system, I can use an email address as username (always my preference), but it’s actually not a valid username to create for others thereafter. Consider allowing ‘@’ character in usernames.

2528User InterfaceBug ReportLowNew user registration doesn't check for duplicate usern...Confirmed
50%
505.01.201907.01.2019 Task Description

Steps done to create the problem:
Visit https://bugs.flyspray.org/index.php?do=register in a private browser window (so you are logged out)

Put in an already taken username (e.g. Stefan or Stefan2)

Expected behavior:
Username gets red and a note appears that username already is taken

Experienced behavior:
Username gets green and registration of a new user proceeds with sending a notification mail with confirmation code.
After putting in the confirmation code in provided page, user gets presented a “username is already taken, choose another” (where?) message, and has to re-start registration process from beginning and hopefully this time choose a not taken name.

2075NotificationsBug ReportHighToo spammy notifications under some circumstancesRequires testing
40%
1.019.10.201503.11.2015 Task Description

danoh on github wants to work on patch. Couldn’t find him here..

1861Backend/CoreBug ReportMediumLogin-Page should redirect after login to the page, the...Confirmed
30%
1.1 devel4112.04.201309.07.2018 Task Description

When some url to a bug is redirected to the login page, because the user does not have the right to see the bug without login, the user should be redirected after the login to the url he wanted to see.

Maybe redirect to /login/?next=/task/X and put the next-url in a hidden field in the login-form, so flyspray can redirect to the correct page after login.
Even preserving anchor-urls (#comment-YYYY) would be cool, but i guess this needs Javascript to work.

1967User InterfaceBug ReportLowKeep browser scroll position when sorting task listNew
20%
1.1 devel412.03.201519.09.2015 Task Description

When I scroll down the page to see more of the task list and then click on one of the column headings to sot by this heading, the answer page doesn't scroll down to the table.

I think there are 2 technical solutions for that:

1. set an name/id a-anchor on top of the table and on each column heading link add for example '#tasklist'.

2. add a js-sorter with complete extra search and sort ajax-backend with e.g. libs from http://datatables.net/ This requires aleso writing a server side handler for taking the ajax requests (respecting user permissions!) and is only usable if js in enabled in browser. So this second solution can only be a luxury comfort function.

2086Backend/CoreBug ReportHighBasic User can see all Projects and TasksUnconfirmed
20%
803.11.201526.01.2017 Task Description

Since Update to Flyspray 1.0 Beta2 all users can see every task in every project.

The rights were set up correctly in Flyspray 1.0 Alpha and worked just fine.

2101Backend/CoreBug ReportLowMobile view GUI bugConfirmed
20%
418.02.201624.02.2016 Task Description

As you can see on screenshot attachment the GUI on mobile view is not OK.

I marked with red field what need to be fixed.

Phone used: Samsung Note 4.

2128Text RenderingBug ReportLowGeshi (part of dokuwiki plugin for code blocks) uses de...Confirmed
20%
2120.05.201605.05.2019 Task Description

The dokuwiki plugin uses a very old version of geshi for syntax highlighting which uses the deprecated /e modifier in preg_replace in two places rather than preg_replace_callback.

This can trigger warnings such as the following when initially parsing content which uses dokuwiki syntax and includes code:

PHP message: PHP Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /home/phpapps/flyspray/plugins/dokuwiki/inc/geshi.php on line 2058

PHP message: PHP Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /home/phpapps/flyspray/plugins/dokuwiki/inc/geshi.php on line 2067

This affects bugs.flyspray.org as well. Several hits came up on google when I search for the following due to the warnings having been displayed ahead of the page content (seen screenshot): flyspray preg_replace_callback

Because flyspray caches the results of processing dokuwiki content then the warnings don’t get emitted if the content has already been cached (so you may find that when you access the url in the screenshot that it doesn’t show the warnings unless you clear the cache entry for that task). Previews can get the warnings spat out as well if there are tagged code sections in the content.

I had a look at a more recent version of geshi (1.0.8.11 from sourceforge) and they had fixed that issue in it (presumably along with a lot of other stuff) so I tried replacing plugins/dokuwiki/inc/geshi.php and plugins/dokuwiki/inc/geshi/* with the 1.0.8.11 versions and that stopped the warnings. I haven’t extensively tested it, but it was processing stuff in code blocks correctly still on the couple of samples I tried.

I guess it’s a separate issue but the new flyspray theme doesn’t have any css styles to apply to the syntax highlighting (if you look at  FS#1107  you can see that, and in fact you can see it with the css bit below - if you inspect them with a browser dom inspector you can see that the genshi plugin has parsed and tagged the bits, but no styles are applied so its all just in the default colour). I can raise that as a separate task if worth doing? The following section in bluey stylesheet covered it I think:

.code .br0 {color:#6c6;}
.code .es0 {color:#009;font-weight:700;}
.code .kw1 {color:#b1b100;}
.code .kw2 {color:#000;font-weight:700;}
.code .kw3 {color:#006;}
.code .kw4 {color:#933;}
.code .me0 {color:#060;}
.code .nu0 {color:#c6c;}
.code .re4 {color:#099;}
.code .sc0 {color:#0bd;}
.code .sc1 {color:#db0;}
.code .sc2 {color:#090;}
.code .st0 {color:red;}
.code .co1,.code .co2,.code .coMULTI {color:gray;font-style:italic;}
.code .kw5,.code .re0,.code .re1,.code .re2 {color:#00f;}
2225GreekBug ReportVery LowGreek uses slash for datesConfirmed
20%
324.10.201622.11.2016 Task Description

Short dates in Greek are represented in the majority of cases with slashes (24/10/2016). Very seldom some people may use the dash form (24-10-2016) and hardly ever the dot form (24.10.2016).

So it would be much appreciated if the slash form were a (working) option because as it is dates are a bit confusing to us, especially in a date-time combination (too many numbers in a not-so-obvious format - brain needs extra time to decode it).

2317User InterfaceBug ReportMediumDate format wrongConfirmed
20%
1.1 devel122.11.201622.11.2016 Task Description

In some parts of the world (primarily the US), the date is viewed as Month/Day/Year. However, all options in the current rc4 build are listed as Day/Month/Year aside from one, which goes ShortWrittenMonth/Day#/Year#.

This is poor from a customer perspective, and can be highly confusing. I can change the date globally to a correct format in the database, but this doesn’t help much as every user can select their own date which has all incorrect formats.

1673Backend/CoreBug ReportHighOnly white screen after upgrade to 1.0 - reasonsConfirmed
10%
1.1 devel31412.01.201117.08.2016
2044Database QueriesBug ReportHighNeed set_charset for DB connect in config fileConfirmed
10%
1.019204.09.201506.06.2018
2111Installer and UpgraderBug ReportMediumUpon trying to install flyspray release, setup says I'm...Planned
10%
224.03.201605.06.2016
2449Backend/CoreBug ReportLowUnexepted exception on smtp gmail sendUnconfirmed
10%
729.10.201710.01.2018
1529Backend/CoreBug ReportLowInactivity-close doesn't work, bug is left openMaybe
0%
2.0207.01.200924.09.2015
1608Installer and UpgraderBug ReportLowreserved characters cause database error after installa...Unconfirmed
0%
2.107.10.200903.03.2013
1734Backend/CoreBug ReportLowAdd Timezone Selection to Admin PanelMaybe
0%
2.0112.05.201207.03.2015
1856Backend/CoreBug ReportMediumWrong timezonesResearching
0%
1227.03.201306.03.2015
1882EmailBug ReportMediumError with email notificationPlanned
0%
2.0622.12.201308.04.2016
1924Backend/CoreBug ReportLowBetter errors messages on email errorNew
0%
1.1 devel11.07.201406.03.2015
1960Backend/CoreBug ReportMediumforeign key relations between versions and tasksNew
0%
209.03.201513.08.2015
1965Public RelationsBug ReportHighPR fixes for FS 1.0 on external sitesNew
0%
1.1 devel111.03.201524.07.2015
1977Backend/CoreBug ReportLowWeird URL after closing task with referenceUnconfirmed
0%
115.03.201518.03.2015
2004User InterfaceBug ReportLowphp notice on unset params on reports pageNew
0%
1.1 devel218.07.201519.09.2015
2007Backend/CoreBug ReportLowtime on project overview activity timelinesNew
0%
18.07.201518.07.2015
2028Text RenderingBug ReportMediumupgrade dokuwiki 'plugin'New
0%
12.08.201520.08.2015
2036Backend/CoreBug ReportVery Lowsession timeoutNew
0%
2121.08.201512.01.2016
2038Backend/CoreBug ReportLowJscalendar must be replaced with something elseNew
0%
223.08.201524.08.2015
2042Backend/CoreBug ReportMediumfunction absoluteURI not using basedir and force_basedi...Unconfirmed
0%
3104.09.201501.10.2015
2048Backend/CoreBug ReportLowerror when adding data containing national charactersUnconfirmed
0%
09.09.201509.09.2015
2053Backend/CoreBug ReportLowambiguous user name displayNew
0%
1.1 devel17.09.201517.09.2015
2055Backend/CoreBug ReportLowMake the csv export table fields respect the user permi...New
0%
1.1 devel17.09.201517.09.2015
2057Backend/CoreBug ReportLowDo not resubmit forms on browser reload button or F5New
0%
122.09.201523.09.2015
2058Backend/CoreBug ReportLowClosing of github.com 'Issues' featureNew
0%
24.09.201524.09.2015
2071EmailBug ReportLowNew user e-mail validationConfirmed
0%
14.10.201514.10.2015
Showing tasks 1 - 50 of 301 Page 1 of 71 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing