Flyspray

This is the Bug Tracking System for the Flyspray project. This is not a demo!

2021-04-23: Flyspray 1.0-rc10 released See https://github.com/Flyspray/flyspray/releases

If you are upgrading from older version, please wait for 1.0-rc11.

2021-11-23: New user registration and password forgotten currently not working on bugs.flyspray.org due email server problems. peterdd

ID Category Task Type Severity Summary Status Progress Assigned To Due In Version  desc Opened Last Edited
2459User InterfaceFeature RequestLowAttachments on/off and max size setting in Admin Toolbo...Unconfirmed
0%
116.02.201803.03.2018 Task Description

It would be great if the Admin Toolbox had an attachments section with an on/off switch, a max size setting, and it would print out all the reasons why it can’t set it to your desired value.

This would help in situations like  FS#2458 , it would be more clear if there is a setting to turn on/off attachments instead of turning them on and off by setting the rights if the attachments folder.

This way if the attachments setting is On, the GUI could also print an error “Attachments folder must be writable” when it detects that the writable attribute does not match the desired setting.

2499User InterfaceBug ReportHighChange recaptcha from using file_get_contents to CurlUnconfirmed
0%
118.09.201802.11.2018 Task Description

The issue with many servers now and the reason that recaptcha does not work is because it requires servers to enable allow_url_fopen which is a huge security risk. That is why you get the warning message when you try to run recaptcha that file_get_contents failed to connect.

So the solution is to use Curl to do that job.

Here is the fixed file, excuse my mess i had not cleaned up my code yet... but recaptcha now works.

this file goes in the includes dir... you can clean up the file if you like again sorry about that.

2528User InterfaceBug ReportLowNew user registration doesn't check for duplicate usern...Confirmed
50%
505.01.201907.01.2019 Task Description

Steps done to create the problem:
Visit https://bugs.flyspray.org/index.php?do=register in a private browser window (so you are logged out)

Put in an already taken username (e.g. Stefan or Stefan2)

Expected behavior:
Username gets red and a note appears that username already is taken

Experienced behavior:
Username gets green and registration of a new user proceeds with sending a notification mail with confirmation code.
After putting in the confirmation code in provided page, user gets presented a “username is already taken, choose another” (where?) message, and has to re-start registration process from beginning and hopefully this time choose a not taken name.

2545User InterfaceInformationLowCan't delete system wide 'Task Statuses'Unconfirmed
0%
320.04.201905.05.2019 Task Description

From the ‘Task Statuses’ menu, when in the global project, the ‘delete’ cases are grayed out, preventing me from deleting them.

This is a problem for me because I would like to only have project specific statuses and I would like to name one of those statuses ‘Assigned’.

For now, I got around it renaming the system wide ‘Assigned’ status.

2548User InterfaceFeature RequestLowCSS grid layout for task details page typeNew
0%
05.05.201905.05.2019 Task Description

Layouts from 320 pixel mobile portrait, tablet sizes and up to 4k monitor landscape mode using

@media queries

Mockups required not only for different sizes, but also different project configurations, user permissions, and task relations.

Should look ok whatever project configuration is done or how weird a task description is.

On wider screens the comments could be beside the task description for instance.
Or some tabs or menus could be shown directly instead of grouping in the tabs.

2549User InterfaceBug ReportLowOauth register template always shows "Username already ...Unconfirmed
0%
06.05.201906.05.2019 Task Description

RC9 running on CentOS LAMP stack

Steps done to create the problem:
Set up google as an oauth provider.
Have a user click “Sign in with Google” in the login box.
User connects their account with Flyspray.
Google redirects the user back to Flyspray
The return screen (on flyspray) asks for a username.

Expected behavior:
No warning about duplicate username should be shown on initial page load since no username was entered yet

Experienced behavior:
A warning about the username being already taken is shown.

It appears there is no logic for showing or hiding that warning in register.oauth.tpl

(It would be great if flyspray was able to just use the email as a username to make the UX even better/simpler.)

2553User InterfaceTODOLowintelligent accesskey shortcut helper dependent of OS, ...New
50%
106.06.201929.07.2019 Task Description

The HTML accesskey attribute feature is differently accessible dependent of operating system, web browser and web browser configuration, and users keyboard layout and user language.

By taking advantage of the User-Agent HTTP header value provided by default by web browsers, Flyspray could better know of what kind of keyboard and browser the user sits in front off and show the key combinations for the accesskey feature that best fits the users environment.

2554User InterfaceTODOLowkeyboard shortcuts help box should adapt to current pag...New
0%
06.06.201906.06.2019 Task Description

The shortcuts help infobox should adapt to the current page type.

So when in editing a task for instance, the n (next task) and p (previous task) shortcuts are not available for a good reason. Listing them there with same priority as other keys then is not helpful.

The simpliest solution is probably putting some if-statements depending on the $do variable into CleanFS/templates/shortcuts.tpl ..

2572User InterfaceTODOLowadd link attributes ugc and nofollow to user generated ...New
0%
13.09.201913.09.2019 Task Description

no task description

2577User InterfaceFeature RequestVery Lowdistinguish between anonymous reporter and deleted userNew
0%
18.10.201918.10.2019 Task Description

When a user is deleted from Flyspray, their opened tasks, closed task and task comments are then shown as Anonymous Submitter, the same way as anonymous reporters (not really anonymous, just that user does not have login account, but usually their email address is stored within that task data).

Currently just the entry from users table are deleted when a user is deleted. Their internal user_id integer is still within tasks and comments fields, and maybe some other tables too. So there is not a ON DELETE SET NULL rule or something like that applied. As it is just an autoincremented number by the system, this is not personal data imho and should be no problem for GDPR, but gives Flyspray the ability to distinguish between anon reporters and deleted users. Well, we could also look if there is an email address within task table entry for notification of anonymous reporter, but there are also tasks possible that have no user_id nor an email address.

It might by useful to present that information differently like deleted user or showing the info differently like icon + title-tooltip with explanation.

Also interesting what happens with mentions of a deleted username in a comment or task description. (see FS#2322)

The user isn’t in database, but deleting that now gone user should not modify tasks or comment where that username was mentioned I think.
But what if another user registers under that now gone username? In that case that new user would inherit that mentions. Probably we can ignore that edge case as there will be not much things will happen with an old mention in old tasks/comments.

2581User InterfaceFeature RequestLowreplace bitmap icons of default themeNew
20%
31.10.201905.04.2021 Task Description

I played with adding a dark mode color theme to the default CleanFS theme.

To make the dark theme just simple exchange some colors, the bitmap icons should be replaced with alternatives.

Easiest would be using the fontawesome font icons as Flyspray still uses them and they can simply get a css color assigned.

Examples

  • caret of tasklist
  • the ‘select all’ icon of tasklist, but also used at some more locations.
  • some icons in the Flyspray main toolbar (Overview, Tasklist, Event log, ..)
  • the black calendar icons for date selects
  • maybe the file type icons for attachments

Editors

  • Dokuwiki toolbar fixed in devel for Flyspray 1.0-rc10
  • CKEditor: some modern CKEditor themes support color/dark mode, I will probably choose the moona-lisa theme as default.
2589User InterfaceBug ReportLowTime zone in user settings is confusingUnconfirmed
0%
228.12.201928.12.2019 Task Description

Hello,

When registering and when later editing users settings it’s possible to specify “Time zone” but the way it’s implemented is confusing. What I see is a drop-down list with GMT[+-]:digit: and this is an odd way to set the timezone for multiple reasons:

1. “GMT” is a word without universally accepted and defined meaning these days, see https://www.ucolick.org/~sla/leapsecs/timescales.html#GMT ;

2. Often time zone specification needs to include the rules when (if ever) to apply DST and what abbreviation is to be used in different cases. See TZ description on https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap08.html#tag_08_03 .

Taking these two points into account I can’t see how to meaningfully use this feature.

TIA for looking into it.

2610User InterfaceFeature RequestLowEffort pop-up timerNew
20%
207.05.202024.08.2020 Task Description

It would be terrific to have a small pop-up window that appears when you click to start tracking of an item. In the window could be:

  • the task name
  • a timer
  • a button to close the timer pop-up and jump to the effort tracking screen, or even to stop the effort timer in FlySpray if possible.

This would help tremendously to remind a developer that he has one or more timers going in FlySpray.

If multiple timers are started, there could be multiple timer windows, each identified by the task name showing as part of the window (title bar or some text near the timer).

2625User InterfaceTODOLowavoid password manager popups in admin prefs areaNew
0%
peterdd110.02.202110.02.2021 Task Description

We must teach browsers not to use some input fields in the admin prefs area to offer to store it in their password manager.

Steps to reproduce:

  1. Login with Firefox as admin into Flyspray. (Maybe other browsers behave same)
  2. Go to admin prefs area (top right gear icon)
  3. Click link somewhere else (so leaving admin prefs page)
  4. Firefox browser pops up password manager as it detected some password input fields on admim prefs setting page. But in this case this is not wanted.

Either by using different input field names where the browser does not assume it is a login password field or find input field attribute to tell them.

auto-complete="off"

is not working anymore in browsers for password fields.

webbrowser: Firefox 85.0.2

Popup probably triggered by the password fields for configuring Email and XMPP notification: smtp_pass and jabber_password input fields. Firefox heuristic is too stupid to detect that these are for server configuration, not user login fields!

Neither

autocomplete="new-password"

nor

autocomplete="one-time-code"

attribute helped.

Stubborn Firefox ..

2114TranslationsTODOMediumStandardize the priority meaning across flyspray transl...New
0%
207.04.201626.03.2018 Task Description

Standardize the priority meaning across flyspray translations.

Idea:

0 - priority unset (database field default value)

1 - defer (or very low priority, often results the task is defered, see “Eisenhower principle”)
2 - low
3 - normal
4 - high
5 - very high

6 - flash (house burns, catastrophic event, website down, “boss” decision)

Some other software (other task planers/ email programs) use a 1-5 step priority. So an export feature to other software may merge priority 6 to priority 5 for such software.

In 2012 meaning was changed only in english translation.

Before normal was priority 2 in a 1-6 range, after it is priority 4 in a 1-6 range.
It should be IMHO 3 in that 1-6 range.

2143TranslationsTODOVery Lowjscalendar: week start should be monday, ISO 8601Confirmed
10%
201.07.201603.03.2019 Task Description

The current jscalendar shows sunday as the first day of the week by default.

Could be modified for a language by adding

// First day of the week. 0 means Sunday, 1 means Monday
Calendar._FD = 1;

js/jscalendar/lang/calendar-XX.js

See also https://github.com/Flyspray/flyspray/commit/f7831b7f6845e237b79da2a68d475f21a24fff72#diff-70a18ca66e215fc5aa282d4c58fed4ab

It should default to Monday as defined by ISO 8601.

https://en.wikipedia.org/wiki/ISO_8601#Week_dates

https://en.wikipedia.org/wiki/Week#Week_numbering

2498TranslationsInformationLowApply variable in language keys to push the local site ...Unconfirmed
0%
118.09.201802.11.2018 Task Description

Hi, in order for us to push our name (rather than flyspray) on emails, notifications, and GUI we had to edit the language file to replace the text “flyspray” with our install site name. That way notifications come from our company name rather than flyspray.

It would be nice if you could take the site name variable and add it to the language files in all keys that face the public user and all notifications. This would not only prevent editing of the lang file but also make setup alot faster.

Thanks so much..
Dave

2531TranslationsFeature RequestLowdetect usage of translation keywordsNew
0%
110.01.201919.03.2019 Task Description

Some translation keywords of Flyspray are used at more than one code location.

To help translators doing the correct translations, it would help to show in what context a translation keyword is used.
Especially when a keyword is used more than once.

As we have our own translation helper integrated into Flyspray, we could show a ‘translation keyword usage counter’ there and maybe show on request in which file
a translation keyword is used.

It would also help to identify ‘abandoned’ translation keywords that are not used anymore by Flyspray source.

Also it would help to identify when a translation is used at more than one location with maybe different context.

I think we can use a regular expression and scan the whole Flyspray source for that.
(and maybe database entries if there are places that have translation keywords stored - I don’t think so, but better check that too first than forget that case)

The regular expression should match that examples case insensitive for the translation keyword report:

L('report' 
L("report"
eL('report'
eL("report"

but also ugly cases like
l(    'report'
or 
El ( "report"

case insensitive.

But not for example

createURL('report'
2052Text RenderingFeature RequestLowAdd Markdown syntax option for task descriptionsUnconfirmed
0%
216.09.201508.08.2016 Task Description

“Markdown is a lightweight markup language with plain text formatting syntax designed so that it can be converted to HTML and many other formats using a tool by the same name.[6][7] Markdown is often used to format readme files, for writing messages in online discussion forums, and to create rich text using a plain text editor.” - https://en.wikipedia.org/wiki/Markdown

2215Text RenderingBug ReportLowwrong output of Geshi syntax highlighting for xml codeNew
0%
117.10.201631.12.2017 Task Description

Geshi 1.0.8.17 from https://github.com/easybook/geshi is quite slow at the current integration of Flyspray v1.0-rc3 on the first run. (But any further read uses the cache.)

But it produces garbled output for xml code highlighting:

Example without xml, just format as preformatted code:

<table>blabla</table>

Or as php syntax highlighting (even if it doesn’t contain a real php-tag ;-) ):

<table>blabla</table>

Example with xml choosen as language:

blabla

The table tag is stripped away instead of converting the tag for output inside code/pre tags (by converting the < and > chars). Maybe just a configuration issue?

2671Text RenderingBug ReportLowgeshi xmlNew
0%
09.11.202209.11.2022 Task Description

geshi dokuwiki does not render properly simple code tag as xml.

just code:

<sql>ALTER TABLE</sql>

as code xml:

ALTER TABLE

as code html:

<sql>ALTER TABLE</sql>
2425SlovenianFeature RequestVery LowTranslation: SlovenianConfirmed
40%
105.03.201705.03.2017 Task Description

I prepared Slovenian translation.
File is in attachment.
You can freely add to release.

2601Public RelationsFeature RequestMediumhttp -> https missing redirection (19-04-09)Assigned
10%
Floelejudas_iscariote321.04.202025.09.2020 Task Description

From: https://groups.google.com/forum/?hl=en#!topic/flyspray/rAnks5y_uLk

19-04-09 // More one year ago.

There are not http → https redirections.

Only one example:
- http://www.flyspray.org/docs/download/ is not redirected to https://www.flyspray.org/docs/download/

Note: It is better to have the main website in https://flyspray.org/.

http://www.flyspray.org/ + https://www.flyspray.org/ + http://www.flyspray.org/ must be redirected to https://flyspray.org/

2613Public RelationsInformationVery LowEmail ist SignupUnconfirmed
0%
116.09.202016.09.2020 Task Description

My School has blocked me from signing up for the Mailing list, how do I sign up or can you add me?

1518NotificationsFeature RequestLowShow last date/time when a reminder was sentUnconfirmed
0%
15.11.200815.11.2008 Task Description

This information is already stored in the table "reminders" in field "last_sent". It might be helpful in some situations, if this date/time would be visible to the user on the reminder list, too.

2023NotificationsFeature RequestLowInform users if reminder is disabled in system settingsNew
0%
04.08.201504.08.2015
2064NotificationsFeature RequestLowDeadline Alert - so Flyspray can send notifications som...Maybe
0%
106.10.201502.12.2015
2216NotificationsFeature RequestLowAdd slack integration (webhook)Unconfirmed
0%
1118.10.201625.10.2018
2344NotificationsBug ReportLowAdmins still get noticed for new users even with the op...Unconfirmed
50%
616.02.201724.03.2017
2520NotificationsFeature RequestLowSend a notification for a new task in slack integration...Unconfirmed
0%
424.10.201830.03.2020
2595NotificationsFeature RequestLowNotifications to message platforms Unconfirmed
0%
105.03.202026.03.2020
2650NotificationsFeature RequestLownotification content or fields dependent of user permis...New
0%
113.08.202113.08.2021
2639JavascriptBug ReportMediumUnable to "deny" a pending requestResearching
0%
peterdd712.05.202113.06.2021
1988Installer and UpgraderBug ReportMediumPassword Field for AdminUnconfirmed
50%
302.04.201512.05.2015
2066Installer and UpgraderFeature RequestMediumAutomated site update (like Wordpress)Unconfirmed
0%
209.10.201510.10.2015
2111Installer and UpgraderBug ReportMediumUpon trying to install flyspray release, setup says I'm...Planned
10%
224.03.201605.06.2016
2202Installer and UpgraderBug ReportHighUnable to upgradeUnconfirmed
0%
310.09.201611.10.2016
2444Installer and UpgraderInformationLowcomposer hits memory limitsNew
0%
04.10.201704.10.2017
2649Installer and UpgraderFeature RequestLowDocker Container: is there a way to hook into the setup...Unconfirmed
0%
1011.08.202127.08.2021
2670Installer and UpgraderTODOHighUpgrader should fix charset and collation if necessaryNew
0%
09.11.202209.11.2022
2222GreekInformationVery LowGreek translation issuesUnconfirmed
0%
324.10.201624.10.2016
2223GreekBug ReportVery LowSome strings need splitting or replacementUnconfirmed
0%
2124.10.201625.10.2016
2224GreekBug ReportVery LowSemicolon is a bad separatorUnconfirmed
0%
1124.10.201625.10.2016
2225GreekBug ReportVery LowGreek uses slash for datesConfirmed
20%
324.10.201622.11.2016
2305GreekFeature RequestVery LowMonth names not translatableUnconfirmed
0%
2126.10.201611.03.2019
2071EmailBug ReportLowNew user e-mail validationConfirmed
0%
14.10.201514.10.2015
2094EmailBug ReportHighAfter Upgrade All Users Receive Notifications for All T...Unconfirmed
0%
4106.01.201613.01.2016
2116EmailBug ReportMediumError with email notificationUnconfirmed
0%
1908.04.201615.04.2016
2339EmailInformationLowEmailing issuesUnconfirmed
0%
110.02.201710.02.2017
2343EmailBug ReportMediumNotification mailUnconfirmed
0%
214.02.201715.02.2017
Showing tasks 151 - 200 of 326 Page 4 of 7

Available keyboard shortcuts

Tasklist

Task Details

Task Editing