Flyspray

Hello,

I was wondering if there is a way to make the task more visible if it wasn’t completed due to the date that was selected by a user - let’s say a yellowish background in tasklist, just like the ones from custom css based on severity, but that will take color if the task has the due date passed.

Problem: https://github.com/Flyspray/flyspray/pull/552

The button ‘My assigned tasks’ should search only by userid, not in username or realname with the LIKE ‘%...%’ operator.

Currently the button is using the same as doing an advanced search filling the ‘Assigned To’ input field. (currently ‘dev’ param) But that search param searches in userid, username and realname.

Edit: Implemented simpler solution: if param is digitsonly, then search by userid, otherwise by username and realname if that param exists.

After updating from “1.0-rc6” to “1.0-rc7 dev” there is missing controls menu on writer. Look attachment.
How to solve this?

Is there any settings to enable this or I’m missing something...

maybe yet fixed in 1.0 dev, but here bugs.flyspray.org my account is shown twice for selection if u edit a task.

Internally in the form also with the same id, so probably not a big problem.

I registered some years ago, maybe this year jordan(?) added me again or with another email adress? Maybe I have two addresses under on account here, which is a feature, not a bug.

But for the assignee list it should “group by user_id”.

Well, it needs a cleanup, per example:

fixed now http://127.0.0.1/flyspray/task/3?project=1

That should be something like:

• http://127.0.0.1/flyspray/project1/tasks/3 (project id not needed, Flyspray knows it from task data)
• http://127.0.0.1/flyspray/task/3

The actual one is actually half a rewrite and half a GET version

• On the myprofile page have a section to show all my votes I put on tasks. done!
• Add the possibility to remove own votes from tasks. done!

• Implement a limitation of the amount of votes a user can put on tasks for a project. Can be enabled/disabled and amount configured. Done!
• project based vote limitation

• When a task is finished/closed, remove the user votes from the task and make that vote again available to the user. Maybe safe the existing historic voting count in an extra field of the task as the votes would drop to 0 on closing the task. removed.

We keep the votes, because a task can be reopened everytime and then the old voters and votes should be visible again. In this case the amount of votes on active task could be a bit greater than allowed, but thats no real problem.
The calculation of done votes and available votes based only on open task and project voting limit.

For example on uservoice.com you have 10 voting points. So you as user has to decide where your priorities are to put your votes.

So all users have more or less the same power to vote for tasks.

In global permissions there is 'View tasks'. This makes it so a user can view all tasks. Need a way instead that they can view only their own tasks, for example a permission called 'View own tasks'.

If 'View own tasks' is checked for a user, in the project list we should only show projects which contain tickets that that user is a part of. Within a given project we should then only show tickets that the user is a part of if they have that permission set.

So for example if 'View tasks' is set, show user all tasks. 'View tasks' is not set, but 'View own tasks' is set then show them only their own tasks and projects.

Should have a page that is a users profile page. so clicking in that users name on a ticket takes you there and you can see what bugs are assigned to them, what they have commented on, and other info about them and about their activity.

Integrate the selectpure javascript to the new task and edit task form.

By default there is a text field where tag names are separated by ‘;’ character.

Selectpure could instead show the tags with their visual layout with a little ‘x’ inside on the right side for removing a tag and autocomplete when typing a tag name to show existing tags from the flyspray_list_tag-table as possible selections.

Instead implemented a CSS and raw javascript solution with a single taghelper.js without any dependancies.

A button beside the tag input text field toggles a list of available tags for the current task, depending on the project and settings.

Still TODO

Tags can only be added on the “new task” page, not managed on the “edit task”-page. done

• The information when a tag is added or removed and by whom logged through flyspray_history table is still TODO.
• The information when a tag is added by whom is visible when hovering over it in the task details view
• Tags are now also searched by the submitted search string when doing a task search.
• In addition to the project level ‘free tagging’ which allows users create new tag names there exists also a use_tags permission per project. This is currently only used on some of the appropriate locations.

Ability to click field to edit ticket

TODO: return handler if request ok or fail.

TODO: also clicks on label should trigger show form.

Maybe the whole “click to active for editing this field” to one click too much.
So if the user has the rights to edit the value the form input or action button should be shown when viewing a task.
All other people just see the value if they have the right to view the value.

I think the button advanced search button should not be placed right beside seach input field as full button.

Maybe a small down arrow under the simple search form with a horizontal line and a title tag as tooltip.

Any comments?

I administer a small personal (<1K ticket) 1.0-rc9 instance running on a Fedora 32 host (php 7.4.16, postgresql 12.6) Following the upgrade instructions (ie transfer attachments, avatars, flyspray.conf.php) the setup/upgrade tool loads, and prompts me to upgrade.

Unfortunately, the upgrade fails spectacularly, with a reported SQL error that belies what’s actually wrong. Here’s a snippet from the postgresql logs where the upgrade is failing:

2021-04-28 10:33:07.190 EDT [2032049] ERROR: column “attachment_id” of relation “flyspray_attachments” already exists
2021-04-28 10:33:07.190 EDT [2032049] STATEMENT: ALTER TABLE flyspray_attachments ADD COLUMN attachment_id SERIAL
2021-04-28 10:33:07.194 EDT [2032049] ERROR: current transaction is aborted, commands ignored until end of transaction block
2021-04-28 10:33:07.194 EDT [2032049] STATEMENT: ALTER TABLE flyspray_attachments ADD COLUMN task_id INTEGER
[…and everything else fails because the transaction aborted…]

It appears that the upgrade script is blindly trying to create columns that already exist in the -rc9 database, and postgresql is treating this as a failure. Because the entire upgrade happens within one transaction, this means the entire upgrade fails at the outset and won’t ever succeed.

The way past this specific problem is to make these ALTER TABLE operations conditional (eg “ALTER TABLE flyspray_attachments ADD COLUMN IF NOT EXISTS task_id INTEGER”).

I administer a moderate-sized (~14K ticket) 1.0-rc9 instance running on a Fedora 32 host (php 7.4.16, mariadb 10.4.18) Following the upgrade instructions (ie transfer attachments, avatars, flyspray.conf.php) the setup/upgrade tool loads, and prompts me to upgrade.

It churns a while before refreshing the screen, claiming a successful 1.0-rc10 upgrade. However, the upgrade seems to not actually “stick”, because clicking on the “return” button I’m dropped back into the upgrader, which is once again claiming I’m running 1.0-rc9 and prompting me to perform the -rc10 upgrade.

According to Flyspray’s admin ‘checks’ tab:

* PHP 7.4.16
* MariaDB 10.4.18
* default_charset: utf8mb4
* default_collation: utf8mb4_unicode_ci
* All tables are ‘InnoDB’

There are no errors logged that I can find, but the upgrade is clearly not working. If I revert to the -rc9 php files, everything continues along as if nothing was done.

Any suggestions?

The HTML accesskey attribute feature is differently accessible dependent of operating system, web browser and web browser configuration, and users keyboard layout and user language.

By taking advantage of the User-Agent HTTP header value provided by default by web browsers, Flyspray could better know of what kind of keyboard and browser the user sits in front off and show the key combinations for the accesskey feature that best fits the users environment.

Steps done to create the problem:
Visit https://bugs.flyspray.org/index.php?do=register in a private browser window (so you are logged out)

Put in an already taken username (e.g. Stefan or Stefan2)

Expected behavior:
Username gets red and a note appears that username already is taken

Experienced behavior:
Username gets green and registration of a new user proceeds with sending a notification mail with confirmation code.
After putting in the confirmation code in provided page, user gets presented a “username is already taken, choose another” (where?) message, and has to re-start registration process from beginning and hopefully this time choose a not taken name.

/index.php?do=admin&area=prefs

There’s a checkbox on this menu to toggle whether admins get notices for new user registrations or not. Ours is off, but I’m still getting those notices.

You cannot select the fields for export to csv. This means that the commentfield (edit: you mean task description, right?) is always exported too. As this commentfield task description (?) could contain quotes, comma’s etc (like people inserting copies of emails on an issue) it corrupts the output file and the file cannot be read by excel.

Pretty minor, but seems to show up regularly enough in our logs. The line in question:

$outfile = str_replace(' ', '_', $tasks[0]['project_title']).'_'.date("Y-m-d").'.csv';

When choosing HTML/CKEditor on the setup screen you are presented with an error stating that syntax plugin cannot be empty.

This is due to the option value being empty:

<select name="syntax_plugin">
			<option value="dokuwiki">Text/Dokuwiki</option>
			<option value="">HTML/CKEditor</option>
			</select>

A suggested fix is to remove the requirement to select an option (since you have to select one or the other anyway).

Notice: Only variables should be assigned by reference in /*/setup/index.php on line 883 
Notice: Only variables should be assigned by reference in /*/setup/index.php on line 949

Hi,
Where i can change severity and priority by default?
I want change severity to “Medium” by default for group Basic
I cant find this option in the Flyspray settings.

“Oh, there are some incompatible properties set that must be resolved before moving this task to a different project.”

Oh, but I am not moving the task to a different project. Just trying to edit my own submission.

“Edit this task” → “Save details”

See attached screen capture.

Both is a bit illogical, but both is currently possible!

1 ←- 1

So when setting the parent task id checked for creating loops is needed:

Loop with 2 tasks: 1 ←- 2 ←- 1

Loop with 3 tasks: 1 ←- 2 ←- 3 ←- 1
Loop with n tasks: 1 ←- ... ←- n < – 1

As I think there are currently no recursive reads that could lead to an endless loop, but should be kept in mind when someone wants to programm rendering a gantt chart.
E.g. by limiting the depth of subtasks for example.

currently absolute positioning overlapping deny button and not full visible

Possible better solution:

• cssbased toggle

• left:50%; width:300px;margin-left:-150px;margin-top:50px;