Flyspray

If you are reporting a bug please provide as much information as possible to help understand and reproduce the problem:

Did you installed an official release or did you used an inoffical docker?!

database type and version, php version and OS version/linux distribution flavour, global or project settings you used that could be relevant for reproducing the problem

Steps done to create the problem: Deleate a Task

Expected behavior: Send a email

Experienced behavior:
Completely unexpected exception: Connection could not be established with host smtp.gmail.com [Connection timed out #110]
This should never happend, please inform Flyspray Developers

The last build is very old, it is possible to create a new build?
- The last RC: 2 years soon
- The last stable: 9 years soon

GitHub Releases section:
- https://github.com/Flyspray/flyspray/releases

Latest release
v1.0-rc9
136c339

Flyspray 1.0-rc9

@peterdd peterdd released this Apr 22, 2019

Stable: http://www.flyspray.org/docs/download/

Flyspray 0.9.9.7 - 28 May 2012

Before install FlySpray, remove “setup” folder, index.php:

PHP Deprecated: Required parameter $wikiName follows optional parameter $name in C:\WWW\flyspray10rc10\plugins\dokuwiki\inc\parser\xhtml.php on line 575
PHP Deprecated: Required parameter $wikiUri follows optional parameter $name in C:\WWW\flyspray10rc10\plugins\dokuwiki\inc\parser\xhtml.php on line 575
PHP Deprecated: Required parameter $wikiName follows optional parameter $title in C:\WWW\flyspray10rc10\plugins\dokuwiki\inc\parser\renderer.php on line 174
PHP Deprecated: Required parameter $wikiUri follows optional parameter $title in C:\WWW\flyspray10rc10\plugins\dokuwiki\inc\parser\renderer.php on line 174
PHP Deprecated: Required parameter $initialPos follows optional parameter $mode in C:\WWW\flyspray10rc10\plugins\dokuwiki\inc\parser\lexer.php on line 441
PHP Deprecated: Required parameter $matchPos follows optional parameter $mode in C:\WWW\flyspray10rc10\plugins\dokuwiki\inc\parser\lexer.php on line 441

After I upgraded to version 1.0 (the upgrade was successful), flyspray only shows a white page (and the source in firefox shows, that the page is completely white).

Please help us finding the roots of these bugs!

Please report what you were exactly doing before this happend, report us your steps made, the used php version, used OS version, and such information.

The application installer needs an overhaul, all strict notices fixed and the associated dependant tasks resolved.

Summary of TODO I found on the net:

• There is a very old project site of flyspray on sf.net . The info there should be updated or removed.

• Update info and keep an eye on http://alternativeto.net/software/flyspray/ from time to time.

• Keep an eye and update Flyspray info on wikipedia for example:
  • http://en.wikipedia.org/wiki/Bug_tracking_system
  • http://en.wikipedia.org/wiki/Comparison_of_issue-tracking_systems
  • http://en.wikipedia.org/wiki/Comparison_of_project_management_software
  • http://en.wikipedia.org/wiki/Comparison_of_help_desk_issue_tracking_software
  • http://de.wikipedia.org/wiki/Issue-Tracking-System

make a option in configuration file

me need set same $db1→set_charset(’utf8mb4’); for my MySQLi

have a problem with national letters

I see this error after i try enter national letters to the summary input text field for create new task

Query {UPDATE `flyspray_tasks` SET project_id = ?, task_type = ?, item_summary = ?, detailed_desc = ?, item_status = ?,
 mark_private = ?, product_category = ?, closedby_version = ?, operating_system = ?, task_severity = ?, task_priority = ?, 
last_edited_by = ?, last_edited_time = ?, due_date = ?, percent_complete = ?, product_version = ?, estimated_effort = ?
 WHERE task_id = ?} 
with params {1,1,тестовая задача,<p>sdfsdfdsfsd</p> ,2,0,4,0,1,2,4,1,1441344777,0,0,1,0,2} Failed!
(Incorrect string value: '\xD1\x82\xD0\xB5\xD1\x81...' for column 'item_summary' at row 1)

danoh on github wants to work on patch. Couldn’t find him here..

Hi,

I can’t see the Editor when I make new task. Also when I editing a exciting task.

See nothing to put any HTML code in it. Can you help me!?

I use this version: Flyspray 0.9.9.7

I upgraded from 0.9.9 to 1.0-beta2 a few hours ago. I received an error about oauth during the upgrade (didn’t think to take a screenshot). In any case, the upgrade otherwise seemed to go smoothly. When I subsequently closed a few tasks people who weren’t assigned to receive notifications for those tasks, even old consultants whose account I had disabled years ago, received the email notification. I also received lots of bounced emails from accounts whose email addresses were no longer existant.

Has anyone else experienced this? I’ve gone into the database and null’d out the email addresses of old accounts to prevent further spam. Not only did it notify everyone who had an account (active or disabled) but it put their email address in the To: field for all to see.

Moving task to another project seems to require fields updated to target project options. This operation is not possible on the task category field and possibly others. Attempting to submit changes gives error:

“Oh, there are some incompatible properties set that must be resolved before moving this task to a different project.”

However, you cannot select a new value (from the target list) for the properties in question.

“Oh, there are some incompatible properties set that must be resolved before moving this task to a different project.”

Oh, but I am not moving the task to a different project. Just trying to edit my own submission.

“Edit this task” → “Save details”

See attached screen capture.

Flyspray does not recover the time set in php.ini. On display, the system has two hour delay.

Fatal error: Class 'League\OAuth2\Client\Provider\Github' not found in /html/bugs/includes/GithubProvider.php on line 11

I have downloaded this:
Precompiled with 3rd party libs for PHP5.6: flyspray-1.0-rc1_php56.tgz
and the file seems really dont exist.

I tried to upgrade from 0.9.9.7 to 1-0-rc1 but I end in an infinite redirection loop

I tried to use the github version, to change the domain name (hosted in dreamhost), to use/not-use the .htaccess, upgraded the version of php from 5.5 to 5.6, to change all the settings in the flyspray.conf.php file, but still having the error after to perform the Upgrade task and removing the setup dir

Used the prepacked dependencies since i cannot install them in this server

Thanks
Thanatermesis

When a anonymous user tries to display a ticket of a non public project (for example by entering a random ticket id), Flyspray exposes the title of the non public project in the header bar.

Edit by peterdd: also applies to project description

After updating from “1.0-rc6” to “1.0-rc7 dev” there is missing controls menu on writer. Look attachment.
How to solve this?

Is there any settings to enable this or I’m missing something...

The issue with many servers now and the reason that recaptcha does not work is because it requires servers to enable allow_url_fopen which is a huge security risk. That is why you get the warning message when you try to run recaptcha that file_get_contents failed to connect.

So the solution is to use Curl to do that job.

Here is the fixed file, excuse my mess i had not cleaned up my code yet... but recaptcha now works.

this file goes in the includes dir... you can clean up the file if you like again sorry about that.

Official release

Steps done to create the problem:
Insert correct (tested with gmail) data into the notification tab and click on “Test”

SSL and TLS are checked.

Expected behavior:
Send test email and confirm it.

Experienced behavior:
Following error message

Error message:
Warning: stream_socket_enable_crypto(): Peer certificate CN=`*.netcup.net’ did not match expected CN=`mail*.netcup.net’ in /var/www/vhosts/.netcup.net/httpdocs/**/flyspray/vendor/swiftmailer/swiftmailer/lib/classes/Swift/Transport/StreamBuffer.php on line 103 Completely unexpected exception: Unable to connect with TLS encryption
This should never happend, please inform Flyspray Developers

I administer a moderate-sized (~14K ticket) 1.0-rc9 instance running on a Fedora 32 host (php 7.4.16, mariadb 10.4.18) Following the upgrade instructions (ie transfer attachments, avatars, flyspray.conf.php) the setup/upgrade tool loads, and prompts me to upgrade.

It churns a while before refreshing the screen, claiming a successful 1.0-rc10 upgrade. However, the upgrade seems to not actually “stick”, because clicking on the “return” button I’m dropped back into the upgrader, which is once again claiming I’m running 1.0-rc9 and prompting me to perform the -rc10 upgrade.

According to Flyspray’s admin ‘checks’ tab:

* PHP 7.4.16
* MariaDB 10.4.18
* default_charset: utf8mb4
* default_collation: utf8mb4_unicode_ci
* All tables are ‘InnoDB’

There are no errors logged that I can find, but the upgrade is clearly not working. If I revert to the -rc9 php files, everything continues along as if nothing was done.

Any suggestions?

I administer a small personal (<1K ticket) 1.0-rc9 instance running on a Fedora 32 host (php 7.4.16, postgresql 12.6) Following the upgrade instructions (ie transfer attachments, avatars, flyspray.conf.php) the setup/upgrade tool loads, and prompts me to upgrade.

Unfortunately, the upgrade fails spectacularly, with a reported SQL error that belies what’s actually wrong. Here’s a snippet from the postgresql logs where the upgrade is failing:

2021-04-28 10:33:07.190 EDT [2032049] ERROR: column “attachment_id” of relation “flyspray_attachments” already exists
2021-04-28 10:33:07.190 EDT [2032049] STATEMENT: ALTER TABLE flyspray_attachments ADD COLUMN attachment_id SERIAL
2021-04-28 10:33:07.194 EDT [2032049] ERROR: current transaction is aborted, commands ignored until end of transaction block
2021-04-28 10:33:07.194 EDT [2032049] STATEMENT: ALTER TABLE flyspray_attachments ADD COLUMN task_id INTEGER
[…and everything else fails because the transaction aborted…]

It appears that the upgrade script is blindly trying to create columns that already exist in the -rc9 database, and postgresql is treating this as a failure. Because the entire upgrade happens within one transaction, this means the entire upgrade fails at the outset and won’t ever succeed.

The way past this specific problem is to make these ALTER TABLE operations conditional (eg “ALTER TABLE flyspray_attachments ADD COLUMN IF NOT EXISTS task_id INTEGER”).

Everything is currently hard-coded. Create a plugin system that allows a module to be simply "dropped into" a plugins/ directory, enabled in the options, and have the plugin just work.

Possibilities might include alternative methods of notification, perhaps a documentation subsystem, or even simple things like voting for tasks.

The user should NOT have to edit existing Flyspray source code to make a plugin work.

I have been working with Eventum (http://www.mysql.org/downloads/other/eventum/) for quite sometime now and in contrast, I like Flyspray for its simplicity and practicality. But one thing I badly miss (and something that Eventum scores high) is a Workflow Engine. If not a sophisticated W.E., I (as an Admin / Manager) should be able define role-based state transition rules of the tasks reported in a particular project. For example, I should be able to implement the following scenario:

1. For a “Developer”, the subsequent tasks from various states. Likewise for other roles
2. “Developer” should not be able close out the bug reports. He/she can only flag them as implemented. The “Reporter” of the bugs or the “Manager” alone should be able to close out issues
3. ..
4. .. it will go on like that

This feature, in my opinion, is very crucial for corporate organizations to give a serious consideration to Flyspray.

Currently, only one owner can be applied per category (at least, that's what the tooltip implies). The ability to add more than one user, a user group, or a mix of the two to a category would be ideal.

Often times, more than one programmer will work on and maintain a feature that cannot be divided into subcategories with the various programmers dispersed accordingly. In such cases, setting all such programmers as owners of the category is beneficial in that they will all receive notifications.

Also, having a parent category's owner receive alerts if no owners are specified for a sub-category benefits from this ability. I may have a "User Interface" group that has all of my UI developers in it; assigning the group to the "User Interface" root category means all relevant developers find out about a new issue that was not directed elsewhere.

One potential conflict does arise with another Flyspray feature. If "Auto-assign a task to the category owner" is enabled, care must be taken to assign no users or the first user to the task; personally, I would prefer no one being assigned and seeing the wording changed to "Auto-assign a task to sole category owners". Worst case scenario would be another option asking if no one or the first user would be assigned to a task in that instance; if a group is specified, the first user in the group would be chosen.

Add a button to test mail configuration before notifications is accpeted