Flyspray

If you are reporting a bug please provide as much information as possible to help understand and reproduce the problem:

Did you installed an official release or did you used an inoffical docker?!

database type and version, php version and OS version/linux distribution flavour, global or project settings you used that could be relevant for reproducing the problem

Steps done to create the problem: Deleate a Task

Expected behavior: Send a email

Experienced behavior:
Completely unexpected exception: Connection could not be established with host smtp.gmail.com [Connection timed out #110]
This should never happend, please inform Flyspray Developers

The last build is very old, it is possible to create a new build?
- The last RC: 2 years soon
- The last stable: 9 years soon

GitHub Releases section:
- https://github.com/Flyspray/flyspray/releases

Latest release
v1.0-rc9
136c339

Flyspray 1.0-rc9

@peterdd peterdd released this Apr 22, 2019

Stable: http://www.flyspray.org/docs/download/

Flyspray 0.9.9.7 - 28 May 2012

Regardless if a gmail.com or other address (tested with my gmail and also other email address)

So this is probably a mail server problem. I try to reach server admin.

I can see my “unfinished registrations” tests in the admin→checks area, but received no emails (waited and checking spam folders too)

Hi,

I can’t see the Editor when I make new task. Also when I editing a exciting task.

See nothing to put any HTML code in it. Can you help me!?

I use this version: Flyspray 0.9.9.7

The application installer needs an overhaul, all strict notices fixed and the associated dependant tasks resolved.

After I upgraded to version 1.0 (the upgrade was successful), flyspray only shows a white page (and the source in firefox shows, that the page is completely white).

Please help us finding the roots of these bugs!

Please report what you were exactly doing before this happend, report us your steps made, the used php version, used OS version, and such information.

Summary of TODO I found on the net:

• There is a very old project site of flyspray on sf.net . The info there should be updated or removed.

• Update info and keep an eye on http://alternativeto.net/software/flyspray/ from time to time.

• Keep an eye and update Flyspray info on wikipedia for example:
  • http://en.wikipedia.org/wiki/Bug_tracking_system
  • http://en.wikipedia.org/wiki/Comparison_of_issue-tracking_systems
  • http://en.wikipedia.org/wiki/Comparison_of_project_management_software
  • http://en.wikipedia.org/wiki/Comparison_of_help_desk_issue_tracking_software
  • http://de.wikipedia.org/wiki/Issue-Tracking-System

make a option in configuration file

me need set same $db1→set_charset(’utf8mb4’); for my MySQLi

have a problem with national letters

I see this error after i try enter national letters to the summary input text field for create new task

Query {UPDATE `flyspray_tasks` SET project_id = ?, task_type = ?, item_summary = ?, detailed_desc = ?, item_status = ?,
 mark_private = ?, product_category = ?, closedby_version = ?, operating_system = ?, task_severity = ?, task_priority = ?, 
last_edited_by = ?, last_edited_time = ?, due_date = ?, percent_complete = ?, product_version = ?, estimated_effort = ?
 WHERE task_id = ?} 
with params {1,1,тестовая задача,<p>sdfsdfdsfsd</p> ,2,0,4,0,1,2,4,1,1441344777,0,0,1,0,2} Failed!
(Incorrect string value: '\xD1\x82\xD0\xB5\xD1\x81...' for column 'item_summary' at row 1)

danoh on github wants to work on patch. Couldn’t find him here..

I upgraded from 0.9.9 to 1.0-beta2 a few hours ago. I received an error about oauth during the upgrade (didn’t think to take a screenshot). In any case, the upgrade otherwise seemed to go smoothly. When I subsequently closed a few tasks people who weren’t assigned to receive notifications for those tasks, even old consultants whose account I had disabled years ago, received the email notification. I also received lots of bounced emails from accounts whose email addresses were no longer existant.

Has anyone else experienced this? I’ve gone into the database and null’d out the email addresses of old accounts to prevent further spam. Not only did it notify everyone who had an account (active or disabled) but it put their email address in the To: field for all to see.

Moving task to another project seems to require fields updated to target project options. This operation is not possible on the task category field and possibly others. Attempting to submit changes gives error:

“Oh, there are some incompatible properties set that must be resolved before moving this task to a different project.”

However, you cannot select a new value (from the target list) for the properties in question.

“Oh, there are some incompatible properties set that must be resolved before moving this task to a different project.”

Oh, but I am not moving the task to a different project. Just trying to edit my own submission.

“Edit this task” → “Save details”

See attached screen capture.

Flyspray does not recover the time set in php.ini. On display, the system has two hour delay.

Fatal error: Class 'League\OAuth2\Client\Provider\Github' not found in /html/bugs/includes/GithubProvider.php on line 11

I have downloaded this:
Precompiled with 3rd party libs for PHP5.6: flyspray-1.0-rc1_php56.tgz
and the file seems really dont exist.

I tried to upgrade from 0.9.9.7 to 1-0-rc1 but I end in an infinite redirection loop

I tried to use the github version, to change the domain name (hosted in dreamhost), to use/not-use the .htaccess, upgraded the version of php from 5.5 to 5.6, to change all the settings in the flyspray.conf.php file, but still having the error after to perform the Upgrade task and removing the setup dir

Used the prepacked dependencies since i cannot install them in this server

Thanks
Thanatermesis

When a anonymous user tries to display a ticket of a non public project (for example by entering a random ticket id), Flyspray exposes the title of the non public project in the header bar.

Edit by peterdd: also applies to project description

After updating from “1.0-rc6” to “1.0-rc7 dev” there is missing controls menu on writer. Look attachment.
How to solve this?

Is there any settings to enable this or I’m missing something...

The issue with many servers now and the reason that recaptcha does not work is because it requires servers to enable allow_url_fopen which is a huge security risk. That is why you get the warning message when you try to run recaptcha that file_get_contents failed to connect.

So the solution is to use Curl to do that job.

Here is the fixed file, excuse my mess i had not cleaned up my code yet... but recaptcha now works.

this file goes in the includes dir... you can clean up the file if you like again sorry about that.

Official release

Steps done to create the problem:
Insert correct (tested with gmail) data into the notification tab and click on “Test”

SSL and TLS are checked.

Expected behavior:
Send test email and confirm it.

Experienced behavior:
Following error message

Error message:
Warning: stream_socket_enable_crypto(): Peer certificate CN=`*.netcup.net’ did not match expected CN=`mail*.netcup.net’ in /var/www/vhosts/.netcup.net/httpdocs/**/flyspray/vendor/swiftmailer/swiftmailer/lib/classes/Swift/Transport/StreamBuffer.php on line 103 Completely unexpected exception: Unable to connect with TLS encryption
This should never happend, please inform Flyspray Developers

I administer a moderate-sized (~14K ticket) 1.0-rc9 instance running on a Fedora 32 host (php 7.4.16, mariadb 10.4.18) Following the upgrade instructions (ie transfer attachments, avatars, flyspray.conf.php) the setup/upgrade tool loads, and prompts me to upgrade.

It churns a while before refreshing the screen, claiming a successful 1.0-rc10 upgrade. However, the upgrade seems to not actually “stick”, because clicking on the “return” button I’m dropped back into the upgrader, which is once again claiming I’m running 1.0-rc9 and prompting me to perform the -rc10 upgrade.

According to Flyspray’s admin ‘checks’ tab:

* PHP 7.4.16
* MariaDB 10.4.18
* default_charset: utf8mb4
* default_collation: utf8mb4_unicode_ci
* All tables are ‘InnoDB’

There are no errors logged that I can find, but the upgrade is clearly not working. If I revert to the -rc9 php files, everything continues along as if nothing was done.

Any suggestions?

I administer a small personal (<1K ticket) 1.0-rc9 instance running on a Fedora 32 host (php 7.4.16, postgresql 12.6) Following the upgrade instructions (ie transfer attachments, avatars, flyspray.conf.php) the setup/upgrade tool loads, and prompts me to upgrade.

Unfortunately, the upgrade fails spectacularly, with a reported SQL error that belies what’s actually wrong. Here’s a snippet from the postgresql logs where the upgrade is failing:

2021-04-28 10:33:07.190 EDT [2032049] ERROR: column “attachment_id” of relation “flyspray_attachments” already exists
2021-04-28 10:33:07.190 EDT [2032049] STATEMENT: ALTER TABLE flyspray_attachments ADD COLUMN attachment_id SERIAL
2021-04-28 10:33:07.194 EDT [2032049] ERROR: current transaction is aborted, commands ignored until end of transaction block
2021-04-28 10:33:07.194 EDT [2032049] STATEMENT: ALTER TABLE flyspray_attachments ADD COLUMN task_id INTEGER
[…and everything else fails because the transaction aborted…]

It appears that the upgrade script is blindly trying to create columns that already exist in the -rc9 database, and postgresql is treating this as a failure. Because the entire upgrade happens within one transaction, this means the entire upgrade fails at the outset and won’t ever succeed.

The way past this specific problem is to make these ALTER TABLE operations conditional (eg “ALTER TABLE flyspray_attachments ADD COLUMN IF NOT EXISTS task_id INTEGER”).

This is taken from FS#1753:

The second reason being there is no way that I know of to automatically set a project usergroup to new members. I only have 1 project, but it seems the Global groups aren’t working (can still see tasks if “View Tasks” is unchecked) and I don’t know how to fix that.

And what I have to say - it is hard to tell if you are on the Flyspray admin settings area or on the admin settings of a project.

Cheapest way is adding some CSS to distinguish this for the user.

But there is in fact more to do to make it user friendly.

• TODO: list configurations for project(task types, categories, ..) in Manage Project should also show the system wide list values as hint to avoid duplication.
• TODO: project user groups overview should show system wide user group infos as info for project managers to avoid unnecessary complicated configuration settings.
• TODO: visualize related permissions that can overrule eachother like ‘view_task’ overrules ‘view_own_tasks’ to avoid misconfigurations

We should change the document logic a bit here. For public projects search engines like well structured pages more then others. And we get a consistent structure too in future for Flyspray.

This I have in mind

Project area name ("All Projects" or "Project name")

Admin setting / Project setting pages, title of the sub pages

Section names in these pages

Task view page

Toplevel project overview /dashboard

New Task page

Reports page

Roadmap page

MyProfile page

Standardize the priority meaning across flyspray translations.

Idea:

0 - priority unset (database field default value)

1 - defer (or very low priority, often results the task is defered, see “Eisenhower principle”)
2 - low
3 - normal
4 - high
5 - very high

6 - flash (house burns, catastrophic event, website down, “boss” decision)

Some other software (other task planers/ email programs) use a 1-5 step priority. So an export feature to other software may merge priority 6 to priority 5 for such software.

In 2012 meaning was changed only in english translation.

Before normal was priority 2 in a 1-6 range, after it is priority 4 in a 1-6 range.
It should be IMHO 3 in that 1-6 range.

display_errors = 1 should not set in include/fix.inc.php for releases or releases candidate, because with this it is not possibele to disable the error reporting globaly.

The problem is, if I want to enable full error reporting to logfile via “error_log=…” in php.ini, then the error will also full reported to user. Full error reporting is a hig risk for security.

Did you installed an official release or did you used an inoffical docker?!
flyspray-1.0-rc9

Steps done to create the problem:
Create a file php.in in base directory with follow contens:
error_reporting = E_ALL | E_STRICT
log_errors = On
display_errors = Off
error_log = /var/log/php-flyspray-errors.log

Expected behavior:
Errors only to log file

Experienced behavior:
All errors goes also to user.
The option “display_errors = Off” has no effect.