Flyspray - The bug killer!

This is the Bug Tracking System for the Flyspray project. This is not a demo!

2019-04-22: Flyspray 1.0-rc9 released See

ID Category Task Type Severity Summary Status  desc Progress Assigned To Due In Version Opened Last Edited
2435Backend/CoreInformationLowMax attach a fileUnconfirmed
118.07.201718.07.2017 Task Description


Can you tell me which file to modify to increase the size of the attachments? Currently limited to 2mb. I would like to authorize 4mb

Thank you


2466Backend/CoreInformationLowHow to run under httpsUnconfirmed
1303.06.201802.12.2018 Task Description

I have changed the htaccess.dist into .htaccess and modified to force https.
However, despite having https activated on my site I cannot get Flyspray running, it’s waiting forever.When I abort I get a page without makeup. I have all other applications like cms and wiki running under https, so it is something I have not done in the flyspray configs obviously (as this site is running https too). But could you give me a hint?

I installed flyspray in a subdirectory, if that is something to know about...

regards, Albert

2476Backend/CoreInformationLowGuzzle/Guzzle is abandoned, should use library that's s...Unconfirmed
110.08.201810.08.2018 Task Description

(Working on a network monitoring system that really needs a ticketing system, saw this and since I speak PHP, thought it would be a good place to start... I just installed and am sharing my notes, do with them what you will!)

2477Backend/CoreInformationLowold style MySQL extension is abandoned ..Unconfirmed
110.08.201810.08.2018 Task Description

the old php mysql extension is long ago reached its demise, why bother supporting it?

I also see in the database connector that your supporting MySQL/PDO - why not settle on that? If the queries aren’t MySQL specific, it becomes easier to support other DB’s, etc.

2479Backend/CoreInformationLowUser table seems really complexUnconfirmed
110.08.201810.08.2018 Task Description

why not store all the user preferences in preferences or user_prefernces? Then users can just be simple username, email, password?

2480Backend/CoreInformationLowBetter file organizationUnconfirmed
110.08.201810.08.2018 Task Description

Save public files inside public or public_html directories, and non-public files outside of those directories;

config file

vendor directory

setup logic


This goes onto another question/point - why are you deleting files from the vendor directory? It happens during composer install, and again after installation? Those files will just get put back if the user ever runs composer install again...

2481Backend/CoreInformationLowMove to MVCUnconfirmed
10.08.201810.08.2018 Task Description

That way you can just protect the setup routes after installation, etc.

And have a much less cumbersome .htaccess file.

And take sensitive files outside of the server path and not risk letting them get out in the public

2482Backend/CoreInformationLowProtect issues by defaultUnconfirmed
110.08.201810.08.2018 Task Description

I get that your project is public and you want people visiting this site to see what issues you’re working on, but most people probably don’t want their bugs list open to the public;

Can this be protected/private by default?

2484Backend/CoreInformationLowIncrease min. version of PHP requirementUnconfirmed
10.08.201810.08.2018 Task Description

Then you can gracefully drop support of old MySQL extension AND drop the need for password compat, since BCRYPT and password_hash are built into PHP from version 5.5 onwards

2498TranslationsInformationLowApply variable in language keys to push the local site ...Unconfirmed
118.09.201802.11.2018 Task Description

Hi, in order for us to push our name (rather than flyspray) on emails, notifications, and GUI we had to edit the language file to replace the text “flyspray” with our install site name. That way notifications come from our company name rather than flyspray.

It would be nice if you could take the site name variable and add it to the language files in all keys that face the public user and all notifications. This would not only prevent editing of the lang file but also make setup alot faster.

Thanks so much..

2521EmailInformationLowTLS email with self-signed certificate doesn't work, "C...Unconfirmed
531.10.201803.11.2018 Task Description

I use a personal email server with a self-signed certificate (i’m not sure if it’s possible to use my https certificate for that? i don’t even kind of understand what all I did to get this email server setup, and I don’t really want to mess with it... especially since my https certificate comes from Let’s Encrypt... so i might have to muck with the email server every 60 days ... not sure?) ..

anyway, when I try to connect to it with Flyspray, I get above the Test Email button, “Completely unexpected exception: Unable to connect with TLS encryption
This should never happend, please inform Flyspray Developers”

Most systems have a way to override and accept an invalid cert, but I’m not seeing anything obvious about doing that with Flyspray. Does a function for this already exist, or do we need a way to do that? (alternatively, I would accept help in properly configuring my email lol)

2524EmailInformationLowSMTP Mailer doesn't accept custom portsUnconfirmed
05.11.201827.11.2018 Task Description

Did you installed an official release or did you used an inoffical docker?!
MySQL 8.0.12, 7.2.9 on debian buster

Steps done to create the problem:
Enter server:port at Mail-Settings

Expected behavior: would make use of the custom port

Experienced behavior:
TLS Errors

          if ($fs->prefs['email_tls']) {
              $swiftconn = Swift_SmtpTransport::newInstance($fs->prefs['smtp_server'], 587, 'tls');
          } else if ($fs->prefs['email_ssl']) {
              $swiftconn = Swift_SmtpTransport::newInstance($fs->prefs['smtp_server'], 465, 'ssl');
          } else {
              $swiftconn = Swift_SmtpTransport::newInstance($fs->prefs['smtp_server']);

Should be changed to

          $someTemporaryVariable = explode(':',$fs->prefs['smtp_server']);
          if ($fs->prefs['email_tls']) {
              $swiftconn = Swift_SmtpTransport::newInstance($someTemporaryVariable[0], $someTemporaryVariable[1] || 587, 'tls');
          } else if ($fs->prefs['email_ssl']) {
              $swiftconn = Swift_SmtpTransport::newInstance($someTemporaryVariable[0], $someTemporaryVariable[1] || 465, 'ssl');
          } else {
              $swiftconn = Swift_SmtpTransport::newInstance($someTemporaryVariable[0], $someTemporaryVariable[1] || 25);
2545User InterfaceInformationLowCan't delete system wide 'Task Statuses'Unconfirmed
320.04.201905.05.2019 Task Description

From the ‘Task Statuses’ menu, when in the global project, the ‘delete’ cases are grayed out, preventing me from deleting them.

This is a problem for me because I would like to only have project specific statuses and I would like to name one of those statuses ‘Assigned’.

For now, I got around it renaming the system wide ‘Assigned’ status.

2551AuthenticationInformationLowLDAP/AD integrationUnconfirmed
315.05.201904.09.2019 Task Description


Please advise if there are known issues when integrating Flyspray with Active Directory using LDAP.

2582Backend/CoreInformationLowHow to reach internal windows share (was: Internal URL)Unconfirmed
304.11.201905.11.2019 Task Description

I have installed flyspray on an internal server and have problems with the renaming of internal links.

For example:
I want to put this link in the comment section.

it shows the link correct,
but when you hover over the link it shows:

And on clicking on it, of course I can´t access the file, because it´s trying to open an external link.
I dont want it to be renamed from ‘\’ to ‘/’.

Can somebody help me please.

I tryed to find it in the sourcecodes, but I have almost no experience in PHP.

Thank you!

2599Backend/CoreInformationLowad post request on new task creationUnconfirmed
30.03.202030.03.2020 Task Description

I’m currently using flyspray

I want to make a little integration of our flyspray installation into slack.
I want make a POST request when a “new task is created”

Any experiment guy can help here ?
1. Where is the best place to achieve this quickly as “hack hardcode” 2. Im not php developer, is there any php lib in flyspray todo quick POST request without installing any additional lib.

2600Backend/CoreInformationLowError #17 when selecting a projectUnconfirmed
31.03.202031.03.2020 Task Description

When I am at the global projects page at index.php?do=admin&area=editallusers and now select a project from the dropdown menu at the top right, I get an error

FEHLER #17: Ungültiger Projektmanager-Bereich!

(according to the the translation area this is key 813: error17 Invalid PM area.)

If I select the project again, the projects start page will be shown correctly.

2613Public RelationsInformationVery LowEmail ist SignupUnconfirmed
116.09.202016.09.2020 Task Description

My School has blocked me from signing up for the Mailing list, how do I sign up or can you add me?

2587Backend/CoreTODOMediumdisplay_errors=1 should not set in release candidateUnconfirmed
18.12.201918.12.2019 Task Description

display_errors = 1 should not set in include/ for releases or releases candidate, because with this it is not possibele to disable the error reporting globaly.

The problem is, if I want to enable full error reporting to logfile via “error_log=…” in php.ini, then the error will also full reported to user. Full error reporting is a hig risk for security.

Did you installed an official release or did you used an inoffical docker?!

Steps done to create the problem:
Create a file in base directory with follow contens:
error_reporting = E_ALL | E_STRICT
log_errors = On
display_errors = Off
error_log = /var/log/php-flyspray-errors.log

Expected behavior:
Errors only to log file

Experienced behavior:
All errors goes also to user.
The option “display_errors = Off” has no effect.

Showing tasks 301 - 319 of 319 Page 7 of 7

Available keyboard shortcuts


Task Details

Task Editing