Flyspray - The bug killer!

This is the Bug Tracking System for the Flyspray project. This is not a demo!

2019-04-22: Flyspray 1.0-rc9 released See https://github.com/Flyspray/flyspray/releases

ID Category Task Type  asc Severity Summary Status Progress Assigned To Due In Version Opened Last Edited
2568DocumentationBug ReportMedium[MANUAL] a missing image in "Understanding Permissions:...Unconfirmed
0%
101.09.201902.09.2019 Task Description

In the page http://www.flyspray.org/manual/group_permissions/ , it is written

Shown is an image of the permissions page for the Flyspray project’s Contributors group

but there is no image in there.

I can think of two ways of dealing with that I guess:

  1. add an image
  2. remove the sentence

What do you think?

1856Backend/CoreBug ReportMediumWrong timezonesResearching
0%
1227.03.201306.03.2015 Task Description

Hello,
when selecting timezone in user profile, it only offers offset based timezones. It should offer timezones like "Europe/Prague", instead, because in summer it is UTC+2 and in the winter UTC+1. Also UTC is the same as GMT.

Using offsets will cause invalid future and past times when crossing daylight saving or when something other changes.

Adding daylight checkbox is not enough and will cause additional troubles. Just use names and store them as ENUM in database, not offset. This problem is pretty complicated and the only solution is to use names and let libraries to solve it for you.

Thank you.

2215Text RenderingBug ReportLowwrong output of Geshi syntax highlighting for xml codeNew
0%
117.10.201631.12.2017 Task Description

Geshi 1.0.8.17 from https://github.com/easybook/geshi is quite slow at the current integration of Flyspray v1.0-rc3 on the first run. (But any further read uses the cache.)

But it produces garbled output for xml code highlighting:

Example without xml, just format as preformatted code:

<table>blabla</table>

Or as php syntax highlighting (even if it doesn’t contain a real php-tag ;-) ):

<table>blabla</table>

Example with xml choosen as language:

blabla

The table tag is stripped away instead of converting the tag for output inside code/pre tags (by converting the < and > chars). Maybe just a configuration issue?

1977Backend/CoreBug ReportLowWeird URL after closing task with referenceUnconfirmed
0%
115.03.201518.03.2015 Task Description

On Mac OS Safari:

I just closed a task and wrote the following into the comment for closing:

"See also F.S.#.14" (of course without the points). When I then click the link in the comment box (below the task details) I'm redirected to:
"http:/flyspray.stefan-herz%0Aog.tld/index.php?do=details&task_id=%0A14". No matter if #14 is closed or not.
It worked with Firefox.

Any suggestions?

2453Backend/CoreBug ReportMediumvalidate category before storing a new taskNew
0%
1.014.12.201714.12.2017 Task Description

Currently the category_id is not checked if the value is legal for the project when a new task is created.

  • must be unsigned int
  • must be an active category_id of the project or global category.
  • setting a category_id must be allowed - see project settings.

If invalid category_id is sent, deny creating task and show error message and show filled form again.

If no category_id is sent (or empty string) and category select is enabled:

  • either choose a default category

or

  • implement feature request FS#2451 and show that user should select a category.
2097User InterfaceBug ReportMediumUrl incorrect for view attachementUnconfirmed
0%
10116.01.201602.03.2016 Task Description

I’m using URL rewriting…

If I click on the link, the picture doesn’t appear.

https://flyspray.xxx.fr/task/27?getfile=8

It’s ok in task history. The right URL is

https://flyspray.xxx.fr/?getfile=8

.

2111Installer and UpgraderBug ReportMediumUpon trying to install flyspray release, setup says I'm...Planned
10%
224.03.201605.06.2016 Task Description

When I tried to install a instance of flyspray that is a release, I am greeted with a screen that says that I am trying to install a development version of flyspray. Due to me using shared hosting, I am unable to run any composer commands.

My version of flyspray was downloaded from flyspray.org, so why would this be happening? Thanks

2028Text RenderingBug ReportMediumupgrade dokuwiki 'plugin'New
0%
12.08.201520.08.2015 Task Description

I see php deprecation notices with php 5.6+ from the geshi syntax highlighter plugin of dokuwiki plugin sometimes. (seems to be go away on the second view, so probably not seen on cached views)

It can't be found easy with

grep -r preg_replace | grep '/e'

Because the preg_replace modifiers are added dynamic depending on the target programming language. At least in the version we have in flyspray.

2319Installer and UpgraderBug ReportHighUpdate failed with "invalid byte sequence for encoding ...Unconfirmed
0%
223.11.201609.12.2016 Task Description

I’m trying to upgrade from 0.9.9.7 to 1.0-rc4 but the Upgrader stops with this message:

Query {UPDATE "tasks" SET detailed_desc = ?WHERE task_id = ?} with params {,400} Failed! (ERROR: invalid byte sequence for encoding "UTF8": 0xc3 0x3c)

Ubuntu 14.04.5 LTS
PostgreSQL 9.3.10

2449Backend/CoreBug ReportLowUnexepted exception on smtp gmail sendUnconfirmed
10%
729.10.201710.01.2018 Task Description

On creating task we got error on event which must send e-mail via “google mail”.

I hoped that in rc6 this will be solved but not. This error was the same on rc4.

2202Installer and UpgraderBug ReportHighUnable to upgradeUnconfirmed
0%
310.09.201611.10.2016 Task Description

I tried to upgrade from 0.9.9.7 to 1-0-rc1 but I end in an infinite redirection loop

I tried to use the github version, to change the domain name (hosted in dreamhost), to use/not-use the .htaccess, upgraded the version of php from 5.5 to 5.6, to change all the settings in the flyspray.conf.php file, but still having the error after to perform the Upgrade task and removing the setup dir

Used the prepacked dependencies since i cannot install them in this server

Thanks
Thanatermesis

2081User InterfaceBug ReportLowUI for adding comment while editing task doesn't use HT...Confirmed
0%
429.10.201506.11.2015 Task Description

While editing an existing task, there’s a “+” button you can click to add a comment as part of the edit. Unfortunately this is just a plaintext box instead of the HTML editor used everywhere else, so it’s impossible to get proper line/paragraph breaks if a comment is entered with this UI.

This problem makes it necessary to edit a task and add a comment as two separate steps, whereas in 0.9.9.6 it was possible to do them together in one step.

Note that this is the case with syntax_plugin=”none”. I don’t know if it’s also a problem when using other values for that setting.

2075NotificationsBug ReportHighToo spammy notifications under some circumstancesRequires testing
40%
1.019.10.201503.11.2015 Task Description

danoh on github wants to work on patch. Couldn’t find him here..

2007Backend/CoreBug ReportLowtime on project overview activity timelinesNew
0%
18.07.201518.07.2015 Task Description

I find it irritating to have the oldest activity on the right side and newest activity on the left side of the small activity bars.

There is also no time scale description. This could be added by showin it on :hover to keep the simple appearance.

A complete new feature would be to replace the image generation by rendering the bars in the html in the same request, e.g by inline svg or canvas element. This would enable adding some interactivity with the activity bars..
A related feature request is FS#1991 (project progress)

2318Installer and UpgraderBug ReportLowsyntax_plugin required when selected ckeditor in SetupRequires testing
50%
323.11.201607.12.2016 Task Description

When choosing HTML/CKEditor on the setup screen you are presented with an error stating that syntax plugin cannot be empty.

This is due to the option value being empty:

<select name="syntax_plugin">
			<option value="dokuwiki">Text/Dokuwiki</option>
			<option value="">HTML/CKEditor</option>
			</select>

A suggested fix is to remove the requirement to select an option (since you have to select one or the other anyway).

1749User InterfaceBug ReportLowSubmit form buttons on lower rightUnconfirmed
50%
117.06.201224.09.2015 Task Description

Any form should have its submit button directly below and to the right of the form.

This is most egregious on the New Task page where you have to scroll back up to the top right to submit.

2223GreekBug ReportVery LowSome strings need splitting or replacementUnconfirmed
0%
2124.10.201625.10.2016 Task Description

There is a conflict in meaning in some words. In English past tense (”he closed the task”) and past participle (”List of closed tasks”) is the same word. But in Greek they are two different words (past tense of close: έκλεισε, past participle of close: κλεισμένος/κλεισμένη/κλεισμένο/.../etc → (actually, past participle has 3 genders (male/female/neutral) x 2 grammatical numbers (singular/plural) x 4 grammatical cases (nominative/genitive/accusative/vocative)) = 24 combinations but we’ll deal with this later if needed).

So, strings that now are used both as past tense and past participle, or used both for singular and plural, must split and use a different string when past tense and a different string when past participle or singular/plural.

These strings are:

varvaluenotes
openedOpened It is used in Event log as past tense (meaning: “User X opened Y task” or “Y task was opened by X” → so in Greek must either use past tense or past participle as singular because it’s one task) and it is also used in Overview as past participle (meaning: “List of opened tasks” → so in Greek must use plural). On the other hand, the same message in task’s History uses var taskopened=”Task opened”. Maybe it would be best if var taskopened was used in Event log too instead of var opened. It would solve my problem.
closedClosed (same as above)
editedEdited (same as above)
2036Backend/CoreBug ReportVery Lowsession timeoutNew
0%
2121.08.201512.01.2016 Task Description

Got "wrong token" on creating a task whose form were open for a while in browser tab.

That means probably the session timed out on bugs.flyspray.org, so the anti csrf token doesn't existed anymore on the webserver.

It would'nt be a big problem if the browser backbutton works showing the ready written form again, but it was empty.

One solution would be temporarly storing it offline in the browser storages which are available with html5. But open for other simpler solutions..

2224GreekBug ReportVery LowSemicolon is a bad separatorUnconfirmed
0%
1124.10.201625.10.2016 Task Description

The symbol “;” in Greek is the question mark. So a list of semicolon-separated values looks like a series of questions in Greek. (looks like this: “cat? dog? rabbit?” ;-))

I suggest replacing semicolons with commas as list separators.

In email lists space is good choice too.

2018User InterfaceBug ReportLowreview keyboard navigationResearching
50%
1.1 devel526.07.201529.07.2019 Task Description

Keyboard navigation is not documented

At least there is no hint in the interface which keyboard shortcuts are available for fast navigation between task list and task details view.

Due to the dropping of the cookie storage for remembering last search or last selected task in favor of not interfering when multiple flyspray browser tabs are open (with e.g. different projects) ,
the caret list browsing with ‘j’,’k’,’o’ and details view isn’t useful at moment.

  1. keyboard based navigation must be documented somewhere, e.g. by providing hints (clickable icon for info or :hover ) at appropriate positions.
  2. navigation flow and technical realisation reviewed for keyboard power users

Edit: Currently handled by js event handler:

  • j move cursor down in task list
  • k move cursor up in task list
  • o open current selected task in task list
  • n next task on task details page
  • p previous task on task details page
grep -r 'accesskey' *

Current accesskeys (browserspecific + key):

  • a double usage for new task and newmultitask. Must hit [Enter] to open one of them; on newmultitask page it adds a new row.
  • e edit task on task details page
  • f copy firstline to the other rows on new multitask page
  • l show loginbox or logs you off
  • m toggle mysearchesbox
  • r reset? when dokuwiki plugin is used
  • s submit when dokuwiki plugin is used
  • w watch/unwatch task on task details page
  • n next task
  • p previous task
  • y close task
2490User InterfaceBug ReportMediumReset Password's Username field has maxlength of 20 - t...Confirmed
50%
1.0201.09.201810.09.2018 Task Description

I’ve set up an account with a username longer than 20 characters, but can’t reset the password because the
flyspray/index.php?do=lostpw
page username field has maxlength=”20” The maxlength for a new user registration seems to be 32 characters.

A related concern is that when setting up the default/admin user on first load of the system, I can use an email address as username (always my preference), but it’s actually not a valid username to create for others thereafter. Consider allowing ‘@’ character in usernames.

1608Installer and UpgraderBug ReportLowreserved characters cause database error after installa...Unconfirmed
0%
2.107.10.200903.03.2013 Task Description

the installer does not check for reserved characters when writing to flyspray.conf.php, causing parse_ini_file() to return an invalid database password.

2441Backend/CoreBug ReportMediumrefactor dokuwiki image tagsNew
0%
15.09.201715.09.2017 Task Description
I’ve tried inserting an image in the intro message but it doesn’t show. Is there something broken in the formattext.inc file? Seems unlikley because it’s so old but can’t work out why nothing shows.
Alan

I had to disable some parts last year within dokuwiki quickly due sever reported security issues in that area.

As tradeoff embedding images currently don’t work within dokuwiki textareas in Flyspray.

As I too wish that feature reappear working for my projects, this is on my personal list. But requires focused free time because must be made secure.

Maybe instead of using fetch.php of dokuwiki, we can use Flypsray’s ?getfile=id , which also checks permissions.
But must check also securly file types and maybe resize images to fit into the desired page (thumbnails).

1965Public RelationsBug ReportHighPR fixes for FS 1.0 on external sitesNew
0%
1.1 devel111.03.201524.07.2015 Task Description

Summary of TODO I found on the net:

  • There is a very old project site of flyspray on sf.net . The info there should be updated or removed.
2142Backend/CoreBug ReportLowPost-authenticate redirect does not make use of baseurl...Unconfirmed
0%
28.06.201601.08.2016 Task Description

I run flyspray behind a reverse proxy with the front end url being https and with the actual back end server not being on a standard port and not using https.

Setting force_baseurl seems to sort most areas with flyspray’s url generation using that instead of picking up from $_SERVER, however post-authentication redirection does not do that it just processes redirect_to as is (which in my case means it picks up the protocol, name and port for the back end server rather than what’s set in force_baseurl).

./themes/CleanFS/templates/loginbox.tpl puts out $_SERVER[’REQUEST_URI‘] into a hidden redirect_to input field - on my setup on the front page that’s e.g. “/” or for a ticket url it would be “/index.php?do=details&task_id=999” so no protocol or hostname.

scripts/authenticate.php picks up that redirect_to value and just passes it to Flyspray::Redirect, which in turn calls FlySpray::absoluteURI on what it’s passed, and FlySpray::absoluteURI doesn’t use $baseurl to qualify the url.

Not sure what the best fix is - my suggestion would be that Redirect detects urls that aren’t fully qualified and adds the $baseurl on to the front of them, rather than calling absoluteURI (absoluteURI is used to set $baseurl if force_baseurl is unset, so that’s not appropriate to modify). Alternatively scripts/authenticate.php could check redirect_to and add $baseurl if needed.

2454Backend/CoreBug ReportLowPHP warning in admin edit user areaNew
0%
15.01.201815.01.2018
2309User InterfaceBug ReportLowPHP noticed displayed on default "All Projects" page.Unconfirmed
0%
302.11.201626.11.2016
2330Backend/CoreBug ReportLowPHP Notice: Undefined offset: 0 in scripts/index.php o...Unconfirmed
50%
423.01.201730.01.2017
2004User InterfaceBug ReportLowphp notice on unset params on reports pageNew
0%
1.1 devel218.07.201519.09.2015
1988Installer and UpgraderBug ReportMediumPassword Field for AdminUnconfirmed
50%
302.04.201512.05.2015
2122Backend/CoreBug ReportMediumopen_basedir restrictions for FS_CACHE_DIR not respecte...Suspended
0%
422.04.201616.08.2016
2074User InterfaceBug ReportMediumOpening tasks from tasklistNew
0%
1.0318.10.201518.07.2016
1673Backend/CoreBug ReportHighOnly white screen after upgrade to 1.0 - reasonsConfirmed
10%
1.1 devel31412.01.201117.08.2016
2549User InterfaceBug ReportLowOauth register template always shows "Username already ...Unconfirmed
0%
06.05.201906.05.2019
2496EmailBug ReportLowNotification Mail - Link to the task invalid when quick...Waiting on Customer
0%
213.09.201814.09.2018
2343EmailBug ReportMediumNotification mailUnconfirmed
0%
214.02.201715.02.2017
2207Backend/CoreBug ReportHighNonpublic project titles and project description exposi...Confirmed
0%
1.0123.09.201629.09.2016
2528User InterfaceBug ReportLowNew user registration doesn't check for duplicate usern...Confirmed
50%
505.01.201907.01.2019
2071EmailBug ReportLowNew user e-mail validationConfirmed
0%
14.10.201514.10.2015
2044Database QueriesBug ReportHighNeed set_charset for DB connect in config fileConfirmed
10%
1.019204.09.201506.06.2018
2198User InterfaceBug ReportLowMulti-Select from tasklist offers options to those who ...Unconfirmed
0%
1122.08.201622.08.2016
2101Backend/CoreBug ReportLowMobile view GUI bugConfirmed
20%
418.02.201624.02.2016
2456User InterfaceBug ReportHighMissing GUI controlsUnconfirmed
80%
509.02.201810.02.2018
2055Backend/CoreBug ReportLowMake the csv export table fields respect the user permi...New
0%
1.1 devel17.09.201517.09.2015
1861Backend/CoreBug ReportMediumLogin-Page should redirect after login to the page, the...Confirmed
30%
1.1 devel4112.04.201309.07.2018
2078User InterfaceBug ReportMediumlayout of requested close on small displaysNew
0%
1.026.10.201529.10.2015
1967User InterfaceBug ReportLowKeep browser scroll position when sorting task listNew
20%
1.1 devel412.03.201519.09.2015
2038Backend/CoreBug ReportLowJscalendar must be replaced with something elseNew
0%
223.08.201524.08.2015
2188Backend/CoreBug ReportVery LowIt should not possible to relate a task to itselfNew
0%
01.08.201601.08.2016
2200User InterfaceBug ReportMediumIncomplete list of timezones available in the user pref...Unconfirmed
0%
26.08.201626.08.2016
Showing tasks 1 - 50 of 301 Page 1 of 7

Available keyboard shortcuts

Tasklist

Task Details

Task Editing