Flyspray - The bug killer!

This is the Bug Tracking System for the Flyspray project. This is not a demo!

2019-04-22: Flyspray 1.0-rc9 released See https://github.com/Flyspray/flyspray/releases

ID Category Task Type Severity Summary Status Progress Assigned To Due In Version   desc Opened Last Edited
2009User InterfaceFeature RequestLowEdit task flowNew
10%
2.0118.07.201507.08.2016 Task Description

Currently only a small portion of adjustements on a task is available in the “edit task” view.

To add or modify stuff in the current tab sections (comments, related tasks, notifications, effort tracking,..)
a user must go from edit task to view task page.

This not optimal for work flow.

To solve this quite much changes are needed. Because currently they are different http requests each with its own checks and request anwsers.

2190Backend/CoreFeature RequestLowenable move of a closed clask to other project without ...Researching
0%
06.08.201606.08.2016 Task Description

Problem: By replacing just the project_id of the closed task it is possible the task then has invalid field values within the target project.

Possible scenarios:

  1. Ignore invalid values within the target project
    • Pro: Easy to do, an immidiatly revert back to the old project would “heal” the task properties.
    • Contra: may effect accuracy and reliability of other parts like searching, listing, statistic calculations
  2. Silent change task field values to valid field values of the target project if necessary
    • Pro: relative easy to do
    • Contra: a bit loss of information, little side effects
  3. allow user to modify the fields that must be changed so that every field of the task has valid values within the target project
    • Pro: accuracy
    • Contra: a bit loss of information(fallback to default values) if there are no similiar field values selectable within the project
  4. allow user to modify the fields, fields or field select values that do not exists in target project will be automatically created.
    • Pro: accuracy
    • Contra: target project may be cluttered with too many fields/field values
  5. ???
2188Backend/CoreBug ReportVery LowIt should not possible to relate a task to itselfNew
0%
01.08.201601.08.2016 Task Description

Flyspray should show a warning, and maybe set the focus back to the field (only when it is a this-one-field-only-form.)

2142Backend/CoreBug ReportLowPost-authenticate redirect does not make use of baseurl...Unconfirmed
0%
28.06.201601.08.2016 Task Description

I run flyspray behind a reverse proxy with the front end url being https and with the actual back end server not being on a standard port and not using https.

Setting force_baseurl seems to sort most areas with flyspray’s url generation using that instead of picking up from $_SERVER, however post-authentication redirection does not do that it just processes redirect_to as is (which in my case means it picks up the protocol, name and port for the back end server rather than what’s set in force_baseurl).

./themes/CleanFS/templates/loginbox.tpl puts out $_SERVER[’REQUEST_URI‘] into a hidden redirect_to input field - on my setup on the front page that’s e.g. “/” or for a ticket url it would be “/index.php?do=details&task_id=999” so no protocol or hostname.

scripts/authenticate.php picks up that redirect_to value and just passes it to Flyspray::Redirect, which in turn calls FlySpray::absoluteURI on what it’s passed, and FlySpray::absoluteURI doesn’t use $baseurl to qualify the url.

Not sure what the best fix is - my suggestion would be that Redirect detects urls that aren’t fully qualified and adds the $baseurl on to the front of them, rather than calling absoluteURI (absoluteURI is used to set $baseurl if force_baseurl is unset, so that’s not appropriate to modify). Alternatively scripts/authenticate.php could check redirect_to and add $baseurl if needed.

2136User InterfaceBug ReportMediumAfter updating user properties as admin - return to wro...Confirmed
0%
308.06.201623.07.2016 Task Description

Logged in as admin, modify a users group membership. After clicking update, you are returned to your logged-in profile (admin in this case). It should re-display the user’s profile you are editing.

The ‘back’ button will return to updated page.

2074User InterfaceBug ReportMediumOpening tasks from tasklistNew
0%
1.0318.10.201518.07.2016 Task Description

Removing table on row click made it impossible to open a task’ details if you do not display the task id and summary on the task list, because now those two cells are the only clickable items to open a task, instead of the entire line being the hyperlink

1849Backend/CoreFeature RequestHighInstaller OverhaulPlanned
50%
1.1 devel515.03.201315.07.2016 Task Description

The application installer needs an overhaul, all strict notices fixed and the associated dependant tasks resolved.

2160Backend/CoreBug ReportLowCannot "accept" PM close request if already closedUnconfirmed
0%
14.07.201614.07.2016 Task Description

If a task creator requested closure, and someone (developer) closes the task explicitly, the PM request cannot be later ‘accepted’ and the PM request remains in the queue.

Workaround - Deny request and queue item is removed OK.

It looks like the PM request button invoked details.close which returns early if task is already closed.

2138User InterfaceFeature RequestVery LowOverhaul dokuwiki editor buttonbarNew
0%
17.06.201617.06.2016 Task Description

Rethink the current sets of buttons and their functionality.

Maybe a mousover hint/cheatsheet of available dokuwiki syntax is more helpful in writing fast and efficient.

  • buttongroup links http,email,ftp
  • buttongroup code, code php: why a single button for php? maybe a cheatsheet or subselect for choosing a language (read directory plugins/dokuwiki/inc/geshi for that). Or even better: Let the project administrator define what source code languages are used/popular in a software project and dependend of that setting prefer/promote that languages
  • I miss a blockquote- or cite-tag for citation, which is more semantic than bold, italic, underline buttons. Update: It is the > character followed by text!
  • Show a cheatsheet (by mouseover?) of dokuwiki smileys as defined at plugins/dokuwiki/conf , update to current config of dokuwiki, facepalm for instance is missing
8-) 8-O 8-o :-( :-) =) :-/ :-\ :-? :-D :-P :-o :-O :-x :-X :-| ;-) ^_^ :?: :!: LOL FIXME DELETEME

8-) icon_cool.gif 8-O icon_eek.gif 8-o icon_eek.gif :-( icon_sad.gif :-) icon_smile.gif =) icon_smile2.gif :-/ icon_doubt.gif :-\ icon_doubt2.gif :-? icon_confused.gif :-D icon_biggrin.gif :-P icon_razz.gif :-o icon_surprised.gif :-O icon_surprised.gif :-x icon_silenced.gif :-X icon_silenced.gif :-| icon_neutral.gif ;-) icon_wink.gif ^_^ icon_fun.gif (not working as first character on a line, bug?) :?: icon_question.gif :!: icon_exclaim.gif LOL icon_lol.gif FIXME fixme.gif DELETEME delete.gif

2139User InterfaceFeature RequestVery LowAdd project setting of popular used programming languag...New
0%
1.1 devel17.06.201617.06.2016 Task Description

This is at the moment just a bit brainstorming ..:

Let the project administrator define what source code languages are used/popular in a software project and dependend of that setting prefer/promote that languages at the dokuwiki editor buttonbar.

This requires probably an additional database field in the flyspay_projects table (if just used for dokuwiki that should be ok)

If thinking further like Filter me all software projects that may ontain CSS code on the projects overview, a m:n-table setup is thinkable. But thats maybe overengineering..
Or can we use the existing tag-feature for that and just ‘tag’ projects with tags?

2137Backend/CoreBug ReportLowfeature accesskey bad implemented by web browsersNew
0%
15.06.201615.06.2016 Task Description

My tests showed that the html accesskey feature is not well and consistent supported by current web browsers and is quite cumbersome to use.
And it seems it will not be better in future..

The only solution I see dropping that feature or replacing them with simple single-key-event javascript listeners, like it is currently done with keys o, j, k, n, and p.

accesskeys in Flyspray I talk about:

  • l (current SHIFT+ALT+l Firefox) login dialog / logout
  • a (current SHIFT+ALT+a Firefox) add new task
  • m (current SHIFT+ALT+m Firefox) my searches
  • t (current SHIFT+ALT+t Firefox) focus taskid search
  • e (current SHIFT+ALT+e + Enter Firefox) edit task
  • x or y? (current SHIFT+ALT+y Firefox) close task
  • s (current SHIFT+ALT+s Firefox) save task

Also related to Keyboard navigation: tabindex

2111Installer and UpgraderBug ReportMediumUpon trying to install flyspray release, setup says I'm...Planned
10%
224.03.201605.06.2016 Task Description

When I tried to install a instance of flyspray that is a release, I am greeted with a screen that says that I am trying to install a development version of flyspray. Due to me using shared hosting, I am unable to run any composer commands.

My version of flyspray was downloaded from flyspray.org, so why would this be happening? Thanks

1980User InterfaceFeature RequestMediumTasklist - PDF ExportMaybe
0%
2.0119.03.201526.05.2016 Task Description

Hello,

First of all, thanks for this great tool.
Can you please add also PDF export for Tasklist?

Thank You.

2127User InterfaceFeature RequestLowoverhaul task detail page layoutNew
0%
120.05.201625.05.2016 Task Description

There was a question on the mailing list:

I have a suggestion, even though I don´t know if it´s possible to do it. But if it is, it would be great!
In the comments list of a given task, is it possible that the comments appear from the newest one to the oldest ones, and not as it is now, with the new ones coming at the end of the list? This is because I deal with long comments list for a given task, and it is becoming difficult to reach the last one, that is, the newest comment, because the order in the comments is on the top, the older ones. If this could be altered it would be great. Kind regards
Ana ...

Quick anwsers:

  1. Users can use ‘End’-key and ‘Pos1’-key on their keyboard to scroll to bottom and top of page. (lame anwser I know)
  2. Another quick anwser is to just reverse the comments array in the appropriate template themes/CleanFS/templates/details.tabs.comments.tpl :

Replace

<?php foreach($comments as $comment): ?>

with

<?php
$comments_latestfirst=array_reverse($comments);
foreach($comments_latestfirst as $comment): ?>

But the real problem I think is that the details page (and others too..) is not optimized for todays wide screens (landscape views). Laptops have FullHD or higher but the Flyspray users still have to scroll to get an overview of a task.

And for narrows views too (mobile phones, tablet portrait view)

The attached screenshot shows moving the task details tabs beside their task description if the display width is over 1200 css pixel. (and the reversed comments too ;-) ). Done with pure css media query:

E.g. add to a custom stylesheet file custom_detailswidescreen.css in folder themes/CleanFS/ :

@media only screen and (min-width: 1200px) and (orientation: landscape) {
.details .tab.active{
        display:inline-block;
}
 
.details .tab{
width:44%;
padding-left:0px;
/*margin-top:60px;*/
box-sizing:border-box;
}
 
.details .commenttext pre {
overflow:auto;
}
.details .comment_container .comment {
width:auto;
margin-left:30px;
display:block;
}
.details .comment_avatar {
position:absolute;
}
.details #comments .fa.fa-user{
font-size:30px !important;
}
 
#submenu li a{margin-left:0;}
 
.details #submenu{
display:inline-block;
position:absolute;
padding:1em 0 0;
margin-top:26px;
}
 
.details #content{
display:inline-block;
box-sizing:border-box;
vertical-align:top;
width:55%;
}
 
/* just a temporary fix: should be redone in theme.css with class instead ids*/
#comments, #related, #notify, #remind, #effort, #history {margin-top:72px;}
 
}

(Has still some problems with current 1.0-rc1 when the project selector wraps. Also tab labels wrap if not enough width available and tab content do not adapt.)

What do you think? How should the details page look on different display sizes? How can it improve the workflow of the user?

1820Backend/CoreFeature RequestLowMerge comments, history, and detailsNew
0%
2.0317.01.201325.05.2016 Task Description

Should be more of a link thread of activity rather than segmented

2126User InterfaceFeature RequestLowdynamic meta description (was: Change page title)Confirmed
0%
1.1 devel217.05.201617.05.2016 Task Description

Hello,

When i put a link in Discord for example, it detects “Flyspray, a Bug Tracking System written in PHP.” as title. How to change it ?

Edit by peterdd: adapted task title/summary to the root of the problem.

2124User InterfaceFeature RequestVery LowDefault avatar can't be restoredConfirmed
0%
227.04.201629.04.2016 Task Description

I unchecked the avatar allowed in the admin panel. I checked it back and set size to 50.
I have to upload an Avatar picture to restore it, but the previous avatar looked like to be html avatar.

Is there a way to restore the html one ?

note: ‘default avatar’ is currently just that guy from the fontawesome webfonts:

<i class="fa fa-user"></i>
2119Backend/CoreBug ReportMediumfunction filter_input not always availableResearching
0%
15.04.201615.04.2016 Task Description

filter_input() is in extension “Filter”.

It is enabled by default since PHP5.2, see http://php.net/manual/en/migration52.new-extensions.php but not “always”, see https://groups.google.com/forum/?hl=de#!topic/flyspray/QM75BvwPqGM

filter_input() is only used at 1 section in Flyspray (since 2014 up to v1.0rc1) in includes/fix.inc.php
This is the commit https://github.com/Flyspray/flyspray/commit/40861911260812c99682fe3456350cb63bb243a9

How do we solve it? Several possibilities:

2116EmailBug ReportMediumError with email notificationUnconfirmed
0%
1908.04.201615.04.2016 Task Description

I have a major problem. At the first I thought that problem is on my server - Windows OS, IIS. But now when I have second bug tracker site on Apache server and error is the same I know that this is not server error but bug tracker error.

How can I help that we resolve this problem?

If e-mail need’s to be sent I got blank white page and nothing happens.

In attachment is my bug tracker with installer (setup) folder. If this somehow helps it?

Version which is used is 1.0 (latest on web) (edit by peterdd: was a mix of older Flyspray versions). The problem is that nothing works because e-mails are not working..

2112APIBug ReportMediumAssigned tickets aren't editable for lower privileged u...Unconfirmed
0%
231.03.201611.04.2016 Task Description

An assigned ticket can't be edited by a lower privileged user.

Steps to reproduce:

  • One Project, Two Users. User A is Admin, User B is Basic
  • A creates a Task.
  • A take ownership of the Task. (it’s important to do this AFTER saving the task. You cannot assign User A if you are A in this moment. Maybe another Bug...!?)
  • Now B is allowed to take ownershop too. B click now “Add me to assignees”.
  • Now B can edit the task.
  • If B click “save”, the task can’t be saved, because some fields haven’t the correct values (esp: state is now “unconfirmed”). Many error messages said, that unexpected values exist

Some weird moments:

  • Why can B edit a task? He have no rights to edit tasks...
  • If B are Basic and have “edit own Task”-Right too, this bug also exist.
2039Installer and UpgraderTODOLowReview INSTALL, README, documentation files for release...New
30%
1.023.08.201509.04.2016 Task Description

Check if the install, setup and upgrade instruction are correct:

  • dev/github versions (using composer for dependency resolving)
  • release versions (using composer or complete bundled binary releases containing all dependencies (ADODB, oauth2, ..)
1882EmailBug ReportMediumError with email notificationPlanned
0%
2.0622.12.201308.04.2016 Task Description

Hello,

First of all, thanks for this great tool, very user friendly.
I'm informing you as requested ("This should never happend, please inform Flyspray Developers" :)) because I'm getting this error message:

[Completely unexpected exception: Connection could not be established with host http://ssl0.ovh.net/ [php_network_getaddresses: getaddrinfo failed: Name or service not known #0]
This should never happend, please inform Flyspray Developers]

I set up the SMTP configuration (SSL) with information provided.

Enclosed in PHPinfo configuration, if it helps.

Thanks

2049Backend/CoreFeature RequestMediumDisplay login page or customizable page to anonymous us...Unconfirmed
0%
209.09.201504.04.2016 Task Description

Currently, if there are no public project, the anonymous users gets a blank page not very useful. It will be a good idea to have a global configuration parameter to display some customizable-page or maybe the login form instead.

1985Database QueriesFeature RequestVery LowFor developers - testing with huge flyspray data setsNew
0%
224.03.201516.03.2016 Task Description

Here I will put some sql examples for the current developers to have a base for testings:

Starting with a default installation with its 1 example project and 1 example task:

I hope we can put all this into valuable phpunit tests for automatic testing with travis-ci.

Still TODO, do not use:
After fresh Flyspray install, add some more projects:

INSERT INTO flyspray_projects (project_title,project_is_active,others_view,anon_open) VALUES('Inactive Project', 0, 1, 1);
INSERT INTO flyspray_projects (project_title,project_is_active,others_view,anon_open) VALUES('Active Project Anonymous Reporting', 1, 1, 1);
INSERT INTO flyspray_projects (project_title,project_is_active,others_view,anon_open) VALUES('Deleted Project', 1, 1, 1);
DELETE FROM flyspray_projects WHERE project_title LIKE 'Deleted Project'; -- delete to have an id gap
INSERT INTO flyspray_projects (project_title,project_is_active,others_view,anon_open) VALUES('Active Project NO Others View', 1, 0, 0);
-- There should now be 4 projects with ids (1,2,3,5).
-- Now lets add some extra roles for a few projects
INSERT INTO flyspray_groups (group_name,project_id,manage_project,view_tasks,open_new_tasks,modify_own_tasks,view_own_tasks,view_groups_tasks) VALUES('Project3 Manager', 3, 1, 1, 1, 1, 1, 1 );
INSERT INTO flyspray_groups (group_name,project_id,manage_project,view_tasks,open_new_tasks,modify_own_tasks,view_own_tasks,view_groups_tasks) VALUES('Project3 Reporter', 3, 0, 1, 0, 1, 1, 1 );
INSERT INTO flyspray_groups (group_name,project_id,manage_project,view_tasks,open_new_tasks,modify_own_tasks,view_own_tasks,view_groups_tasks) VALUES('Project5 Developer', 5, 0, 1, 1, 1, 1, 1 );
-- TODO
-- Then create some more users:
INSERT INTO flyspray_users(user_name,real_name,email_address,account_enabled,tasks_perpage,lang_code) VALUES('tester1','T1Developer','tester1@example.com',1,100,'en');
INSERT INTO flyspray_users(user_name,real_name,email_address,account_enabled,tasks_perpage,lang_code) VALUES('tester2','T2Reporter_P3Manager','tester2@example.com',1,100,'de');
INSERT INTO flyspray_users(user_name,real_name,email_address,account_enabled,tasks_perpage,lang_code) VALUES('tester3','T3Basic_P3Reporter_P5Developer','tester3@example.com',1,100,'fr');
-- And put them into a global group and a few into project roles too:
INSERT INTO flyspray_users_in_groups(user_id,group_id) VALUES(2,2);
INSERT INTO flyspray_users_in_groups(user_id,group_id) VALUES(3,3);
INSERT INTO flyspray_users_in_groups(user_id,group_id) VALUES(3,8);
INSERT INTO flyspray_users_in_groups(user_id,group_id) VALUES(4,4);
INSERT INTO flyspray_users_in_groups(user_id,group_id) VALUES(4,9);
INSERT INTO flyspray_users_in_groups(user_id,group_id) VALUES(4,10);
-- And lets fill the Database with 10 different configured task to simulate different cases:
INSERT INTO flyspray_tasks(project_id,task_type,item_status,supertask_id) VALUES(1,1,1,0); -- id2 in first project
INSERT INTO flyspray_tasks(project_id,task_type,item_status,supertask_id) VALUES(2,1,1,0); -- id3 in inactive project
INSERT INTO flyspray_tasks(project_id,task_type,item_status,supertask_id) VALUES(2,1,1,3); -- id4 in inactive project
INSERT INTO flyspray_tasks(project_id,task_type,item_status,supertask_id) VALUES(3,1,0,6); -- id5 status 0,supertask_id6
INSERT INTO flyspray_tasks(project_id,task_type,item_status,supertask_id) VALUES(3,1,0,0); -- id6
INSERT INTO flyspray_tasks(project_id,task_type,item_status,supertask_id) VALUES(3,1,1,6); -- id7
INSERT INTO flyspray_tasks(project_id,task_type,item_status,supertask_id) VALUES(5,1,1,0); -- id8
INSERT INTO flyspray_tasks(project_id,task_type,item_status,supertask_id) VALUES(5,1,1,8); -- id9
INSERT INTO flyspray_tasks(project_id,task_type,item_status,supertask_id) VALUES(5,1,1,9); -- id10
-- TODO
-- And now lets fill the database with many task referencing the 10 base tasks (10k or more rows) by repeating the following until enough (grows exponential x**2 !
INSERT INTO flyspray_tasks (project_id,task_type,item_status, supertask_id, item_summary) SELECT 3,1,1,FLOOR(RAND()*11),RAND() FROM flyspray_tasks;

These Examples can be used for finding bottle necks or problems on huge installations.


	
2105Backend/CoreFeature RequestMediumcountermeasures for 'add task anonymous' spamNew
0%
127.02.201627.02.2016 Task Description

Today I got first SPAM on bugtracker.

Question: Is it possible to enable CAPTCHA for anonymus task add?

Question 2: Is it possible to delete SPAM tasks.

2104Backend/CoreBug ReportLowfiltering by one user on tasks with multiple assignees ...New
0%
26.02.201626.02.2016
2101Backend/CoreBug ReportLowMobile view GUI bugConfirmed
20%
418.02.201624.02.2016
1973Backend/CoreTODOLowurl rewritePlanned
80%
1.1 devel214.03.201511.02.2016
1982Backend/CoreBug ReportLowdouble entries in assignees listNew
80%
1.1 devel320.03.201511.02.2016
2096Backend/CoreFeature RequestVery LowAdd an option to force httpsMaybe
0%
316.01.201617.01.2016
1812Backend/CoreFeature RequestLowMultiple email addressesPlanned
20%
1.1 devel317.01.201330.12.2015
2068Backend/CoreInformationLowDeprecated: mysql_connect(): The mysql extension is dep...Unconfirmed
0%
710.10.201508.12.2015
1962Backend/CoreFeature RequestLowSMS notification - sending notifications via sms same a...New
0%
211.03.201502.12.2015
2064NotificationsFeature RequestLowDeadline Alert - so Flyspray can send notifications som...Maybe
0%
106.10.201502.12.2015
2012Backend/CoreFeature RequestMediumManaging TagsNew
60%
1.1 devel418.07.201512.11.2015
1868Backend/CoreFeature RequestLowOne issue for multiple componentsMaybe
0%
2.0222.06.201312.11.2015
1950User InterfaceTODOMediumSolve confusing Flyspray group settings vs Project grou...Confirmed
50%
1.0907.03.201511.11.2015
2081User InterfaceBug ReportLowUI for adding comment while editing task doesn't use HT...Confirmed
0%
429.10.201506.11.2015
1809User InterfaceFeature RequestLow Searching closed tasks by Reason for closingMaybe
0%
2.0217.01.201306.11.2015
1966User InterfaceFeature RequestLowMy votes on myprofileNew
80%
1.1 devel11.03.201503.11.2015
2075NotificationsBug ReportHighToo spammy notifications under some circumstancesRequires testing
40%
1.019.10.201503.11.2015
1970User InterfaceFeature RequestLowIcons for predefined task typesNew
20%
1.1 devel112.03.201530.10.2015
2085Text RenderingInformationMediumEnabling Color Coding options in CKEDITORUnconfirmed
0%
130.10.201530.10.2015
2083User InterfaceInformationLowDrag and drop tasks on roadmapUnconfirmed
0%
30.10.201530.10.2015
2078User InterfaceBug ReportMediumlayout of requested close on small displaysNew
0%
1.026.10.201529.10.2015
2073Backend/CoreBug ReportLowCouldn't edit comment of anonymous reporterNew
0%
17.10.201517.10.2015
1847User InterfaceFeature RequestLowMake default theme responsivePlanned
20%
1.1 devel314.03.201316.10.2015
1736User InterfaceFeature RequestLowBe able to add colors for Task StatusesPlanned
50%
1.1 devel516.05.201215.10.2015
2071EmailBug ReportLowNew user e-mail validationConfirmed
0%
14.10.201514.10.2015
1978User InterfaceBug ReportLowCompensate degraded usability due added token system an...Confirmed
50%
1.0516.03.201512.10.2015
Showing tasks 201 - 250 of 316 Page 5 of 7

Available keyboard shortcuts

Tasklist

Task Details

Task Editing