Flyspray - The bug killer!

This is the Bug Tracking System for the Flyspray project. This is not a demo!

2018-07-16: Flyspray 1.0-rc7 released See https://github.com/Flyspray/flyspray/releases

IDCategoryTask TypeSeveritySummaryStatusProgressAssigned ToDue In VersionOpenedLast Edited
2128Text RenderingBug ReportLowGeshi (part of dokuwiki plugin for code blocks) uses de...Confirmed
20%
2120.05.201616.06.2016 Task Description

The dokuwiki plugin uses a very old version of geshi for syntax highlighting which uses the deprecated /e modifier in preg_replace in two places rather than preg_replace_callback.

This can trigger warnings such as the following when initially parsing content which uses dokuwiki syntax and includes code:

PHP message: PHP Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /home/phpapps/flyspray/plugins/dokuwiki/inc/geshi.php on line 2058

PHP message: PHP Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /home/phpapps/flyspray/plugins/dokuwiki/inc/geshi.php on line 2067

This affects bugs.flyspray.org as well. Several hits came up on google when I search for the following due to the warnings having been displayed ahead of the page content (seen screenshot): flyspray preg_replace_callback

Because flyspray caches the results of processing dokuwiki content then the warnings don’t get emitted if the content has already been cached (so you may find that when you access the url in the screenshot that it doesn’t show the warnings unless you clear the cache entry for that task). Previews can get the warnings spat out as well if there are tagged code sections in the content.

I had a look at a more recent version of geshi (1.0.8.11 from sourceforge) and they had fixed that issue in it (presumably along with a lot of other stuff) so I tried replacing plugins/dokuwiki/inc/geshi.php and plugins/dokuwiki/inc/geshi/* with the 1.0.8.11 versions and that stopped the warnings. I haven’t extensively tested it, but it was processing stuff in code blocks correctly still on the couple of samples I tried.

I guess it’s a separate issue but the new flyspray theme doesn’t have any css styles to apply to the syntax highlighting (if you look at  FS#1107  you can see that, and in fact you can see it with the css bit below - if you inspect them with a browser dom inspector you can see that the genshi plugin has parsed and tagged the bits, but no styles are applied so its all just in the default colour). I can raise that as a separate task if worth doing? The following section in bluey stylesheet covered it I think:

.code .br0 {color:#6c6;}
.code .es0 {color:#009;font-weight:700;}
.code .kw1 {color:#b1b100;}
.code .kw2 {color:#000;font-weight:700;}
.code .kw3 {color:#006;}
.code .kw4 {color:#933;}
.code .me0 {color:#060;}
.code .nu0 {color:#c6c;}
.code .re4 {color:#099;}
.code .sc0 {color:#0bd;}
.code .sc1 {color:#db0;}
.code .sc2 {color:#090;}
.code .st0 {color:red;}
.code .co1,.code .co2,.code .coMULTI {color:gray;font-style:italic;}
.code .kw5,.code .re0,.code .re1,.code .re2 {color:#00f;}
2127User InterfaceFeature RequestLowoverhaul task detail page layoutNew
0%
120.05.201625.05.2016 Task Description

There was a question on the mailing list:

I have a suggestion, even though I don´t know if it´s possible to do it. But if it is, it would be great!
In the comments list of a given task, is it possible that the comments appear from the newest one to the oldest ones, and not as it is now, with the new ones coming at the end of the list? This is because I deal with long comments list for a given task, and it is becoming difficult to reach the last one, that is, the newest comment, because the order in the comments is on the top, the older ones. If this could be altered it would be great. Kind regards
Ana ...

Quick anwsers:

  1. Users can use ‘End’-key and ‘Pos1’-key on their keyboard to scroll to bottom and top of page. (lame anwser I know)
  2. Another quick anwser is to just reverse the comments array in the appropriate template themes/CleanFS/templates/details.tabs.comments.tpl :

Replace

<?php foreach($comments as $comment): ?>

with

<?php
$comments_latestfirst=array_reverse($comments);
foreach($comments_latestfirst as $comment): ?>

But the real problem I think is that the details page (and others too..) is not optimized for todays wide screens (landscape views). Laptops have FullHD or higher but the Flyspray users still have to scroll to get an overview of a task.

And for narrows views too (mobile phones, tablet portrait view)

The attached screenshot shows moving the task details tabs beside their task description if the display width is over 1200 css pixel. (and the reversed comments too ;-) ). Done with pure css media query:

E.g. add to a custom stylesheet file custom_detailswidescreen.css in folder themes/CleanFS/ :

@media only screen and (min-width: 1200px) and (orientation: landscape) {
.details .tab.active{
        display:inline-block;
}
 
.details .tab{
width:44%;
padding-left:0px;
/*margin-top:60px;*/
box-sizing:border-box;
}
 
.details .commenttext pre {
overflow:auto;
}
.details .comment_container .comment {
width:auto;
margin-left:30px;
display:block;
}
.details .comment_avatar {
position:absolute;
}
.details #comments .fa.fa-user{
font-size:30px !important;
}
 
#submenu li a{margin-left:0;}
 
.details #submenu{
display:inline-block;
position:absolute;
padding:1em 0 0;
margin-top:26px;
}
 
.details #content{
display:inline-block;
box-sizing:border-box;
vertical-align:top;
width:55%;
}
 
/* just a temporary fix: should be redone in theme.css with class instead ids*/
#comments, #related, #notify, #remind, #effort, #history {margin-top:72px;}
 
}

(Has still some problems with current 1.0-rc1 when the project selector wraps. Also tab labels wrap if not enough width available and tab content do not adapt.)

What do you think? How should the details page look on different display sizes? How can it improve the workflow of the user?

2126User InterfaceFeature RequestLowdynamic meta description (was: Change page title)Confirmed
0%
1.1 devel217.05.201617.05.2016 Task Description

Hello,

When i put a link in Discord for example, it detects “Flyspray, a Bug Tracking System written in PHP.” as title. How to change it ?

Edit by peterdd: adapted task title/summary to the root of the problem.

2124User InterfaceFeature RequestVery LowDefault avatar can't be restoredConfirmed
0%
227.04.201629.04.2016 Task Description

I unchecked the avatar allowed in the admin panel. I checked it back and set size to 50.
I have to upload an Avatar picture to restore it, but the previous avatar looked like to be html avatar.

Is there a way to restore the html one ?

note: ‘default avatar’ is currently just that guy from the fontawesome webfonts:

<i class="fa fa-user"></i>
2122Backend/CoreBug ReportMediumopen_basedir restrictions for FS_CACHE_DIR not respecte...Suspended
0%
422.04.201616.08.2016 Task Description

Edit by peterdd: renamed task summary

Affected versions: at least Flyspray 0.9.9(.7/*?) up to Flyspray 1.0 RC1

Original report: Title ‘Problem regarding 0.9.7 (1.0) to 1.0 RC-1 update’

I tried to update BT from modified version (database in original state) 0.9.7 to 1.0 RC-1 but I got strange error.

PHP is 5.6.

I try to use:
Precompiled with 3rd party libs for PHP5.6

and was doing as was written on upgrade procedure.

Strange is that “D:\SShopBT\includes\class.flyspray.php” there are errors regarding writtable path... Because the path is correct and all other Joomla and Wordpress web sites are working correctly..

After upgrade web site do not work att all. Login not working - just get error. So I must reverse (use backup) database and files.

Server is Windows Server and IIS (Internet Information Services)..

Complete error was (also seen in screenshot):

Warning: is_writable(): open_basedir restriction in effect. File(C:\PHP-temp) is not within the allowed path(s): (D:\) in D:\SShopBT\includes\class.flyspray.php on line 1162 
Warning: is_writable(): open_basedir restriction in effect. File(C:\PHP-temp) is not within the allowed path(s): (D:\) in D:\SShopBT\includes\class.flyspray.php on line 1164 
Warning: is_dir(): open_basedir restriction in effect. File(C:\Windows\TEMP\e865fa2fdfc11dbb32cc6262d247e766) is not within the allowed path(s): (D:\) in D:\SShopBT\includes\constants.inc.php on line 82 
Warning: Cannot modify header information - headers already sent by (output started at D:\SShopBT\includes\class.flyspray.php:1162) in D:\SShopBT\header.php on line 14 
Warning: Cannot modify header information - headers already sent by (output started at D:\SShopBT\includes\class.flyspray.php:1162) in D:\SShopBT\header.php on line 15 
Warning: Cannot modify header information - headers already sent by (output started at D:\SShopBT\includes\class.flyspray.php:1162) in D:\SShopBT\header.php on line 16 
Warning: session_start(): Cannot send session cookie - headers already sent by (output started at D:\SShopBT\includes\class.flyspray.php:1162) in D:\SShopBT\includes\class.flyspray.php on line 893 
Warning: session_start(): Cannot send session cache limiter - headers already sent (output started at D:\SShopBT\includes\class.flyspray.php:1162) in D:\SShopBT\includes\class.flyspray.php on line 893 
Warning: Cannot modify header information - headers already sent by (output started at D:\SShopBT\includes\class.flyspray.php:1162) in D:\SShopBT\index.php on line 93 
Warning: Cannot modify header information - headers already sent by (output started at D:\SShopBT\includes\class.flyspray.php:1162) in D:\SShopBT\index.php on line 94 Headers are already sent, this should not have happened. Please inform Flyspray developers.
2121Backend/CoreBug ReportMedium'my assigned tasks' uses like %?% search instead of use...Confirmed
90%
1.0319.04.201603.02.2018 Task Description

Problem: https://github.com/Flyspray/flyspray/pull/552

The button ‘My assigned tasks’ should search only by userid, not in username or realname with the LIKE ‘%...%’ operator.

Currently the button is using the same as doing an advanced search filling the ‘Assigned To’ input field. (currently ‘dev’ param) But that search param searches in userid, username and realname.

Edit: Implemented simpler solution: if param is digitsonly, then search by userid, otherwise by username and realname if that param exists.

2119Backend/CoreBug ReportMediumfunction filter_input not always availableResearching
0%
15.04.201615.04.2016 Task Description

filter_input() is in extension “Filter”.

It is enabled by default since PHP5.2, see http://php.net/manual/en/migration52.new-extensions.php but not “always”, see https://groups.google.com/forum/?hl=de#!topic/flyspray/QM75BvwPqGM

filter_input() is only used at 1 section in Flyspray (since 2014 up to v1.0rc1) in includes/fix.inc.php
This is the commit https://github.com/Flyspray/flyspray/commit/40861911260812c99682fe3456350cb63bb243a9

How do we solve it? Several possibilities:

2118User InterfaceFeature RequestLowShow overview of existing tags for usersNew
0%
1.1 devel09.04.201609.04.2016 Task Description

At several places it could be useful to let the user view available tags:

  1. When editing a task a toggle popup could show a list of selectable and existing tags.
  2. Make the list of tags searchable for the advanced search.
2116EmailBug ReportMediumError with email notificationUnconfirmed
0%
1908.04.201615.04.2016 Task Description

I have a major problem. At the first I thought that problem is on my server - Windows OS, IIS. But now when I have second bug tracker site on Apache server and error is the same I know that this is not server error but bug tracker error.

How can I help that we resolve this problem?

If e-mail need’s to be sent I got blank white page and nothing happens.

In attachment is my bug tracker with installer (setup) folder. If this somehow helps it?

Version which is used is 1.0 (latest on web) (edit by peterdd: was a mix of older Flyspray versions). The problem is that nothing works because e-mails are not working..

2114TranslationsTODOMediumStandardize the priority meaning across flyspray transl...New
0%
207.04.201626.03.2018 Task Description

Standardize the priority meaning across flyspray translations.

Idea:

0 - priority unset (database field default value)

1 - defer (or very low priority, often results the task is defered, see “Eisenhower principle”)
2 - low
3 - normal
4 - high
5 - very high

6 - flash (house burns, catastrophic event, website down, “boss” decision)

Some other software (other task planers/ email programs) use a 1-5 step priority. So an export feature to other software may merge priority 6 to priority 5 for such software.

In 2012 meaning was changed only in english translation.

Before normal was priority 2 in a 1-6 range, after it is priority 4 in a 1-6 range.
It should be IMHO 3 in that 1-6 range.

2112APIBug ReportMediumAssigned tickets aren't editable for lower privileged u...Unconfirmed
0%
231.03.201611.04.2016 Task Description

An assigned ticket can't be edited by a lower privileged user.

Steps to reproduce:

  • One Project, Two Users. User A is Admin, User B is Basic
  • A creates a Task.
  • A take ownership of the Task. (it’s important to do this AFTER saving the task. You cannot assign User A if you are A in this moment. Maybe another Bug...!?)
  • Now B is allowed to take ownershop too. B click now “Add me to assignees”.
  • Now B can edit the task.
  • If B click “save”, the task can’t be saved, because some fields haven’t the correct values (esp: state is now “unconfirmed”). Many error messages said, that unexpected values exist

Some weird moments:

  • Why can B edit a task? He have no rights to edit tasks...
  • If B are Basic and have “edit own Task”-Right too, this bug also exist.
2111Installer and UpgraderBug ReportMediumUpon trying to install flyspray release, setup says I'm...Planned
10%
224.03.201605.06.2016 Task Description

When I tried to install a instance of flyspray that is a release, I am greeted with a screen that says that I am trying to install a development version of flyspray. Due to me using shared hosting, I am unable to run any composer commands.

My version of flyspray was downloaded from flyspray.org, so why would this be happening? Thanks

2108User InterfaceFeature RequestMediumSupport local language when install FlysprayConfirmed
30%
3103.03.201615.07.2016 Task Description

Please show install page as local language, Thank you.

2107Backend/CoreFeature RequestLowSupport CAS Server AuthenticateUnconfirmed
0%
102.03.201604.03.2016 Task Description

Please support Central Authentication Service, thank you.

2105Backend/CoreFeature RequestMediumcountermeasures for 'add task anonymous' spamNew
0%
127.02.201627.02.2016 Task Description

Today I got first SPAM on bugtracker.

Question: Is it possible to enable CAPTCHA for anonymus task add?

Question 2: Is it possible to delete SPAM tasks.

2104Backend/CoreBug ReportLowfiltering by one user on tasks with multiple assignees ...New
0%
26.02.201626.02.2016 Task Description

If you have a tasklist with tasks that have multiple assignees in a task and you search just by one of the assignees, the resulting tasklist shows only this user in the assignees column.

Expected: all assignees of the tasks are shown.

2102Backend/CoreBug ReportMediumstrict ordering of tags required New
0%
1.0219.02.201618.07.2017 Task Description

When saving the tag list at admin and project area, the ordering of the tags must be recalculated.

So it is not more legal to have a list ordering like (0,0,0,1,3,4,7)

That should be recalculated and stored as (1,2,3,4,5,6, 7) (or 0,1,2,3,4,5,6)
currently in file includes/modify.inc.php

Why?

The SQL for the tasklist uses currently GROUP_CONCAT (and a equivalent syntax for postgres) that groups by list_tag.list_position.
Well, we could just ‘group by’ the tag_id too, but with list_position value we can show the most important tags first.

3 times, and that 3 result fields must be in the same order. (tag id, tag name, tag class field)

Also that sql-query part there needs a little modification, but first fix that strict ordering.

Alternative

Don’t use group_concat() or similiar for list_tag.tag_name or list_tag.class. Instead load an indexed array once per http request and only when needed.

For instance as function within class.flyspray.inc.php:

        /**
         * load all tags into array
         *
         * compared to listTags of class project, this preloads all tags in flyspray database
         * ideally maximal called once per http request, then using the array index for getting info
         *
         * @return array
         */
        public static function getAllTags()
        {
                global $db;
                $at=array();
                $res = $db->Query('SELECT tag_id,project_id,list_position,tag_name,class,show_in_list FROM {list_tag} ORDER BY list_position ASC');
                while ($t = $db->FetchRow($res)){
                        $at[$t['tag_id']]=array(
                                'project_id'=>$t['project_id'],
                                'list_position'=>$t['list_position'],
                                'tag_name'=>$t['tag_name'],
                                'class'=>$t['class'],
                                'show_in_list'=>$t['show_in_list']
                        );
                }
                return $at;
        }

in scripts/index.php in function tpl_draw_cell():

function tpl_draw_cell($task, $colname, $format = "<td class='%s'>%s</td>") {
  global $fs, $db, $proj, $page, $user, $alltags;
...
  case 'summary':
...
    if($task['tagids']!=''){
                        # if global $alltags are yet undefined, preload the tags now.
                        if(!is_array($alltags)) {
                                $alltags=$fs->getAllTags();
...
 foreach($tagids as $tagid){
                                $tgs.='<i class="tag t'.$tagid
                                        .(isset($alltags[$tagid]['class']) ? ' ' .htmlspecialchars($alltags[$tagid]['class'], ENT_QUOTES, 'utf-8') : '').'" title="'.htmlspecialchars($alltags[$tagid]['tag_name'], ENT_QUOTES, 'utf-8').'"></i>';
                        }
2101Backend/CoreBug ReportLowMobile view GUI bugConfirmed
20%
418.02.201624.02.2016 Task Description

As you can see on screenshot attachment the GUI on mobile view is not OK.

I marked with red field what need to be fixed.

Phone used: Samsung Note 4.

2098User InterfaceBug ReportMediumAttached image cannot be downloadedConfirmed
50%
1.1 devel530.01.201610.01.2017 Task Description

Steps:

- Attach an image to a task.
- It shows as a link in your task (cf. screenshot “Screenshot from 2016-01-29 18-34-31.png”).
- Click on the link.

Result: it opens a “popup” with the image displayed in it. If the image is big, the popup is just so huge the image is not visible without boring horizontal and vertical scrolling (see “Screenshot from 2016-01-30 15-07-26.png” which shows what I see when I click the image link on my task).
I can’t even right click to download from the menu since I see no “Save Image As” item. (see Screenshot-no-save-image-in-menu.png).

My workaround was that if I drag and drop the attachment link in the address bar, I finally get the expected image, which I can finally save as! This workaround was hard to find, and I expect most people will just get frustrated of being able to view an image attachment, yet not save it locally.

I proposes the following:
- a small “download” icon next to the image link in the task for direct download (without preview).
- a “download” link/icon on the top-left of the image display popup (to download while previewing).

And as a side feature (maybe I should make a separate report?), I suggest that by default the image display popup constrains the image to the screen size, with a “see real size” link, so that you don’t get the popup with huge scrolling when opening a big image on a smaller screen.

Note: of course this issue does not appear with non displayable attachment. If I have a zip or a document, it proposes me to download it directly.

2097User InterfaceBug ReportMediumUrl incorrect for view attachementUnconfirmed
0%
10116.01.201602.03.2016 Task Description

I’m using URL rewriting…

If I click on the link, the picture doesn’t appear.

https://flyspray.xxx.fr/task/27?getfile=8

It’s ok in task history. The right URL is

https://flyspray.xxx.fr/?getfile=8

.

2096Backend/CoreFeature RequestVery LowAdd an option to force httpsMaybe
0%
316.01.201617.01.2016 Task Description

Can you add an option to force HTTPS ?

Thx.

2094EmailBug ReportHighAfter Upgrade All Users Receive Notifications for All T...Unconfirmed
0%
4106.01.201613.01.2016 Task Description

I upgraded from 0.9.9 to 1.0-beta2 a few hours ago. I received an error about oauth during the upgrade (didn’t think to take a screenshot). In any case, the upgrade otherwise seemed to go smoothly. When I subsequently closed a few tasks people who weren’t assigned to receive notifications for those tasks, even old consultants whose account I had disabled years ago, received the email notification. I also received lots of bounced emails from accounts whose email addresses were no longer existant.

Has anyone else experienced this? I’ve gone into the database and null’d out the email addresses of old accounts to prevent further spam. Not only did it notify everyone who had an account (active or disabled) but it put their email address in the To: field for all to see.

2089Backend/CoreBug ReportMediumadding same taskid as subtask or related task should be...New
50%
peterdd1.0207.11.201518.11.2016 Task Description

Both is a bit illogical, but both is currently possible! ;-)

1 ←- 1

So when setting the parent task id checked for creating loops is needed:

Loop with 2 tasks: 1 ←- 2 ←- 1

Loop with 3 tasks: 1 ←- 2 ←- 3 ←- 1
Loop with n tasks: 1 ←- ... ←- n < – 1

As I think there are currently no recursive reads that could lead to an endless loop, but should be kept in mind when someone wants to programm rendering a gantt chart.
E.g. by limiting the depth of subtasks for example.

2087Backend/CoreInformationHighSee no Editor in Add New TaskUnconfirmed
0%
4104.11.201505.11.2015 Task Description

Hi,

I can’t see the Editor when I make new task. Also when I editing a exciting task.

See nothing to put any HTML code in it. Can you help me!?

I use this version: Flyspray 0.9.9.7

2086Backend/CoreBug ReportHighBasic User can see all Projects and TasksUnconfirmed
20%
803.11.201526.01.2017 Task Description

Since Update to Flyspray 1.0 Beta2 all users can see every task in every project.

The rights were set up correctly in Flyspray 1.0 Alpha and worked just fine.

2085Text RenderingInformationMediumEnabling Color Coding options in CKEDITORUnconfirmed
0%
130.10.201530.10.2015 Task Description

Hi

So I figured out that there are no color coding options (to set text color and background color) for text in the CKEDITOR. I did some changes to CKEDITOR to add those, however, once I submit the text, it does not retain the changes.

Is there a particular reason why these are not enabled in the first place?

I am thinking it would be good add these, so that we can make the important text pop-out to the users.

- Raju

2083User InterfaceInformationLowDrag and drop tasks on roadmapUnconfirmed
0%
30.10.201530.10.2015 Task Description

On the roadmap it would make life a lot easier if it was possible to drag and drop tasks into versions.

2081User InterfaceBug ReportLowUI for adding comment while editing task doesn't use HT...Confirmed
0%
429.10.201506.11.2015 Task Description

While editing an existing task, there’s a “+” button you can click to add a comment as part of the edit. Unfortunately this is just a plaintext box instead of the HTML editor used everywhere else, so it’s impossible to get proper line/paragraph breaks if a comment is entered with this UI.

This problem makes it necessary to edit a task and add a comment as two separate steps, whereas in 0.9.9.6 it was possible to do them together in one step.

Note that this is the case with syntax_plugin=”none”. I don’t know if it’s also a problem when using other values for that setting.

2078User InterfaceBug ReportMediumlayout of requested close on small displaysNew
0%
1.026.10.201529.10.2015 Task Description

currently absolute positioning overlapping deny button and not full visible

Possible better solution:

  • cssbased toggle
  • left:50%; width:300px;margin-left:-150px;margin-top:50px;
2075NotificationsBug ReportHighToo spammy notifications under some circumstancesRequires testing
40%
1.019.10.201503.11.2015 Task Description

danoh on github wants to work on patch. Couldn’t find him here..

2074User InterfaceBug ReportMediumOpening tasks from tasklistNew
0%
peterdd1.0318.10.201518.07.2016 Task Description

Removing table on row click made it impossible to open a task’ details if you do not display the task id and summary on the task list, because now those two cells are the only clickable items to open a task, instead of the entire line being the hyperlink

2073Backend/CoreBug ReportLowCouldn't edit comment of anonymous reporterNew
0%
17.10.201517.10.2015 Task Description

I wanted edit/fix the comment of an anonymous reporter, but the edit shows empty content on editing..

(here on closed, but non yet implemented  FS#218 )

2072User InterfaceFeature RequestLowSetting parent task interface is too hiddenConfirmed
0%
2116.10.201516.10.2015 Task Description

Hello!

Today i was installed flyspray from git master and found some error.

Any user interface missing any fields to set parent task. Show parent field options was added in “fields when add/edit/view task” field at preferences page for project, but no affect.

Screenshots:

http://joxi.ru/vAWVOKGS9Y812W http://joxi.ru/D2P6dY7h0MnKr3 http://joxi.ru/1A5RGxwSVoM0rE

Flyspray version: Github master branch

2071EmailBug ReportLowNew user e-mail validationConfirmed
0%
14.10.201514.10.2015 Task Description

On flyspray/index.php?do=admin&area=newuser I sucessfuly register user with email ;

I don’t recieve popup with message ‘You did’nt enter valid e-mail address’

After that on new page i receive error:

Completely unexpected exception: Address in mailbox given [;] does not comply with RFC 2822, 3.6.2.
This should never happend, please inform Flyspray Developers

2068Backend/CoreInformationLowDeprecated: mysql_connect(): The mysql extension is dep...Unconfirmed
0%
710.10.201508.12.2015 Task Description

My version of PHP still shows deprecation warnings with flyspray.

Deprecated: mysql_connect(): The mysql extension is deprecated and will be removed in the future: use mysqli or PDO instead in /var/www/flyspray.itiab.co.nz/htdocs/adodb/drivers/adodb-mysql.inc.php on line 353

Have all mysql.connect instances been removed? The connect will be removed from PHP soon and will cause problems.

2066Installer and UpgraderFeature RequestMediumAutomated site update (like Wordpress)Unconfirmed
0%
209.10.201510.10.2015 Task Description

All is in the title

vote for this task please

2065User InterfaceFeature RequestMediumOne click signup (with facebook, twitter , Google, yaho...Unconfirmed
50%
1109.10.201503.03.2016 Task Description

Hello,

I wanted to request a feature that will DRAMATICALLY increase the popularity and the usage of flyspray worldwide which is :

One click signup

This can be done by using existing signup solutions like openID, live.com, Google, Facebook ,twitter, Yahoo, gravatar (these are the most universal according to http://www.alexa.com/topsites)

The goal is to give a new user the possibility to sign up in less than 15 sec (and mention this in the signup page)
2064NotificationsFeature RequestLowDeadline Alert - so Flyspray can send notifications som...Maybe
0%
106.10.201502.12.2015 Task Description

splitted from FS#1697 as own task

2063Backend/CoreFeature RequestVery Lowshow closed/open usage count on do=pm&area=XXXNew
0%
peterdd29.09.201529.09.2015 Task Description

Currently on

  • do=pm&area=version
  • do=pm&area=os
  • do=pm&area=resolution
  • do=pm&area=status
  • do=pm&area=tags
  • do=pm&area=tasktype

a count of usage in tasks is shown for every property.

Interesting would be if the counter shows the count for open/closed tasks on each row.

2062User InterfaceTODOLowreview do=admin&area=editallusersNew
20%
129.09.201509.07.2018 Task Description

Bugs

  • Small javascript issue: When checkbox of one users row clicked, it doesn’t select the checkbox because the row click event handler doubles the click (check and uncheck, tested with firefox41). Clicking in the row (not on the name) selects the checkbox. fixed
  • browser back button after delete of a user not working as expected. (fix it by redirect 303 , see modify.inc.php how it done for other form submits)

Missing features

  • no sorting possible of the table (like tasklist)
  • no paging (like on tasklist) OK, probably not needed: ~2000 user registrations on bugs.flyspray.org and no problem rendering the table in browser.
  • no filtering of user list possible
  • no helpful information for admins like registration date and last time of login of users (last login time requires a new field in flyspray_users)
  • no summary about users like how many exists or how many are currently online (requires storing sessions in a db session (e.g. flyspray_session) table instead php default session directory) on the install. Or a statistic graph of activity or peaks of new registrations over time.
  • maybe show user profile image too in the list.
  • choosable user field columns - partially implemented since 1.0-rc7 by selecting groups of user fields and calculated user fields: user stats, user settings
2059Backend/CoreFeature RequestLowusage of github automated/webhook notificationsNew
0%
24.09.201524.09.2015 Task Description

We have no API yet for Flyspray.

But someone could write a simple php-file that can be called by a github.com auto notification, whenever:

  • a commit on github.com for Flyspray/flyspray is made

Github.com provides the configuration of such notification for a possible target like

https://bugs.flyspray.org/api/github.php

or

https://bugs.flyspray.org/api/github.php?project=1

in the settings of a project.

What the file needs:

  • import some of the existing Flyspray classes from includes/
  • config or load the secrets that are provided by github.com in the setup for the automatic notification
  • check that secrets and more for authentication and authorization of requests coming from github.com
  • parse the messages for Flyspray identifiers like ' FS#1234 ' or 'fix  FS#1234 ' or 'related to  FS#1234 '
  • take actions on the results of that message parsing like making adding comment or modifying a task status
2058Backend/CoreBug ReportLowClosing of github.com 'Issues' featureNew
0%
24.09.201524.09.2015 Task Description

As discussed with the team some time ago, a consolidation of places where issues are discussed is wanted.

One of the results was, that we do not want people post issues to github.com Issues and instead use our own bugs.flyspray.org
and to prefer "to eat our own dogfood" and a have central place to handle tasks.

As a result we tried to reduce the open issueas on github.com. I was in the process of moving 2 of still 7 open issues there to bugs.flyspray.org when suddenly the Issues on github.com were closed. :-( Now the last 5 issues there are lost at the moment for me and the audience, which where mostly informations to interested users, not bugs.

I think just closing it without an easy accessible alternative is not the best solution.

At least we should wait until the oauth2 authentication for github users should be implemented and setup on bugs.flyspray.org , so people browsing github.com, finding Flyspray project just can
"Login with github"-feature on bugs.flyspray.org.

The blocker to do this: Currently there is missing an option to "connect" an oauth "Login with github"- Login with an existend flyspray userlogin.

So that one userid in flyspray can:

  • login with username and password
  • login with one or more of his social accounts (github, facebook, microsoft, g+) if they are enabled (would it restrict to github.com accounts for bugs.flyspray.org)
2057Backend/CoreBug ReportLowDo not resubmit forms on browser reload button or F5New
0%
122.09.201523.09.2015 Task Description

On some forms, when the user presses the reload button of this browser, the POST submit can be resubmitted.

Browsers can warn about this (Chromium, Firefox, Konqueror tested and they show a warning dialog) before executing the second POST.
But people on Flyspray mailing list wrote they experienced double comments.

Simple solution is just HTTP GET redirects after a successful POST. (HTTP 303 or HTTP 302)
But maybe there is a better method than a second roundtrip always needed?

Success, Error, or Warn-messages to the user are stored in the $_SESSION variable for displaying on the second GET request.
But I think that this is a bit ... mmh... not perfect.

For example, I would like to have in the direct response at which position in a form an input error is, not just the message bar in the top center as it is currently that just dissappear after a few seconds.

Also take care the browser back button still works as expected for the user.

2055Backend/CoreBug ReportLowMake the csv export table fields respect the user permi...New
0%
1.1 devel17.09.201517.09.2015 Task Description

Just moved issue #110 from https://github.com/Flyspray/flyspray/issues/110 to here for centralized task tracking.

Maybe just needs testing with current github master.

2054Backend/CoreFeature RequestLowFields for csv export choosable like for task listNew
0%
2.0117.09.201531.12.2017 Task Description

Currently the task list columns are used, which are choosed by admin or project manager for the task list view.

2053Backend/CoreBug ReportLowambiguous user name displayNew
0%
1.1 devel17.09.201517.09.2015 Task Description

With the existence of now two peoples named "Peter" on bugs.flyspray.org (I - peterdd , and PeterTheOne)
there are several places where the full names are display instead of usernames and the user can't know who is which "Peter" until he visits the users profile page.

Different solutions possible:

  • more profile image/gravatar usage where user names are shown
  • display username instead of full name
  • display full name and username (where much space available and precision needed)
  • ...
2052Text RenderingFeature RequestLowAdd Markdown syntax option for task descriptionsUnconfirmed
0%
216.09.201508.08.2016 Task Description

“Markdown is a lightweight markup language with plain text formatting syntax designed so that it can be converted to HTML and many other formats using a tool by the same name.[6][7] Markdown is often used to format readme files, for writing messages in online discussion forums, and to create rich text using a plain text editor.” - https://en.wikipedia.org/wiki/Markdown

2049Backend/CoreFeature RequestMediumDisplay login page or customizable page to anonymous us...Unconfirmed
0%
209.09.201504.04.2016 Task Description

Currently, if there are no public project, the anonymous users gets a blank page not very useful. It will be a good idea to have a global configuration parameter to display some customizable-page or maybe the login form instead.

2048Backend/CoreBug ReportLowerror when adding data containing national charactersUnconfirmed
0%
09.09.201509.09.2015 Task Description

this one is somehow tricky, it doesn't happens always but sometimes when fields or filenames contain national characters (I'm in Spain) flyspray returns an error looking like this one:

Query {INSERT INTO `flyspray_attachments` ( task_id, comment_id, file_name, file_type, file_size, orig_name, added_by, date_added) VALUES (?, ?, ?, ?, ?, ?, ?, ?)} with params {189,711,189_9c5d837bb10b7e0989a3c8be8d,application/pdf; charset=binary,736986,Guia de aplicación medidas difusicón y publicidad.pdf,4,1441827828} Failed! (Incorrect string value: '\xCC\x81n me...' for column 'orig_name' at row 1)

here we have a pdf named "Guia de aplicación medidas difusicón y publicidad.pdf" but I had this error also with titles or descriptions containing spanish letters...

2047User InterfaceFeature RequestMediumInserting images/screenshots from bufferUnconfirmed
0%
2104.09.201529.09.2015 Task Description

Good if adding functional about easy way for insert screenshots to task

Showing tasks 101 - 150 of 280 Page 3 of 6 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing