Flyspray - The bug killer!

This is the Bug Tracking System for the Flyspray project. This is not a demo!

2019-04-22: Flyspray 1.0-rc9 released See

ID Category  asc Task Type Severity Summary Status Progress Assigned To Due In Version Opened Last Edited
2128Text RenderingBug ReportLowGeshi (part of dokuwiki plugin for code blocks) uses de...Confirmed
2120.05.201605.05.2019 Task Description

The dokuwiki plugin uses a very old version of geshi for syntax highlighting which uses the deprecated /e modifier in preg_replace in two places rather than preg_replace_callback.

This can trigger warnings such as the following when initially parsing content which uses dokuwiki syntax and includes code:

PHP message: PHP Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /home/phpapps/flyspray/plugins/dokuwiki/inc/geshi.php on line 2058

PHP message: PHP Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /home/phpapps/flyspray/plugins/dokuwiki/inc/geshi.php on line 2067

This affects as well. Several hits came up on google when I search for the following due to the warnings having been displayed ahead of the page content (seen screenshot): flyspray preg_replace_callback

Because flyspray caches the results of processing dokuwiki content then the warnings don’t get emitted if the content has already been cached (so you may find that when you access the url in the screenshot that it doesn’t show the warnings unless you clear the cache entry for that task). Previews can get the warnings spat out as well if there are tagged code sections in the content.

I had a look at a more recent version of geshi ( from sourceforge) and they had fixed that issue in it (presumably along with a lot of other stuff) so I tried replacing plugins/dokuwiki/inc/geshi.php and plugins/dokuwiki/inc/geshi/* with the versions and that stopped the warnings. I haven’t extensively tested it, but it was processing stuff in code blocks correctly still on the couple of samples I tried.

I guess it’s a separate issue but the new flyspray theme doesn’t have any css styles to apply to the syntax highlighting (if you look at  FS#1107  you can see that, and in fact you can see it with the css bit below - if you inspect them with a browser dom inspector you can see that the genshi plugin has parsed and tagged the bits, but no styles are applied so its all just in the default colour). I can raise that as a separate task if worth doing? The following section in bluey stylesheet covered it I think:

.code .br0 {color:#6c6;}
.code .es0 {color:#009;font-weight:700;}
.code .kw1 {color:#b1b100;}
.code .kw2 {color:#000;font-weight:700;}
.code .kw3 {color:#006;}
.code .kw4 {color:#933;}
.code .me0 {color:#060;}
.code .nu0 {color:#c6c;}
.code .re4 {color:#099;}
.code .sc0 {color:#0bd;}
.code .sc1 {color:#db0;}
.code .sc2 {color:#090;}
.code .st0 {color:red;}
.code .co1,.code .co2,.code .coMULTI {color:gray;font-style:italic;}
.code .kw5,.code .re0,.code .re1,.code .re2 {color:#00f;}
2345Text RenderingBug ReportLow<hr> should be in allowed tagsUnconfirmed
220.02.201723.02.2017 Task Description

Because the hr tag is allowed in the new html comment editor it should be also allowed to display it in the ticket description.
class.tpl.php:875 –> just add it here

2085Text RenderingInformationMediumEnabling Color Coding options in CKEDITORUnconfirmed
130.10.201530.10.2015 Task Description


So I figured out that there are no color coding options (to set text color and background color) for text in the CKEDITOR. I did some changes to CKEDITOR to add those, however, once I submit the text, it does not retain the changes.

Is there a particular reason why these are not enabled in the first place?

I am thinking it would be good add these, so that we can make the important text pop-out to the users.

- Raju

2215Text RenderingBug ReportLowwrong output of Geshi syntax highlighting for xml codeNew
117.10.201631.12.2017 Task Description

Geshi from is quite slow at the current integration of Flyspray v1.0-rc3 on the first run. (But any further read uses the cache.)

But it produces garbled output for xml code highlighting:

Example without xml, just format as preformatted code:


Or as php syntax highlighting (even if it doesn’t contain a real php-tag ;-) ):


Example with xml choosen as language:


The table tag is stripped away instead of converting the tag for output inside code/pre tags (by converting the < and > chars). Maybe just a configuration issue?

2028Text RenderingBug ReportMediumupgrade dokuwiki 'plugin'New
12.08.201520.08.2015 Task Description

I see php deprecation notices with php 5.6+ from the geshi syntax highlighter plugin of dokuwiki plugin sometimes. (seems to be go away on the second view, so probably not seen on cached views)

It can't be found easy with

grep -r preg_replace | grep '/e'

Because the preg_replace modifiers are added dynamic depending on the target programming language. At least in the version we have in flyspray.

2114TranslationsTODOMediumStandardize the priority meaning across flyspray transl...New
207.04.201626.03.2018 Task Description

Standardize the priority meaning across flyspray translations.


0 - priority unset (database field default value)

1 - defer (or very low priority, often results the task is defered, see “Eisenhower principle”)
2 - low
3 - normal
4 - high
5 - very high

6 - flash (house burns, catastrophic event, website down, “boss” decision)

Some other software (other task planers/ email programs) use a 1-5 step priority. So an export feature to other software may merge priority 6 to priority 5 for such software.

In 2012 meaning was changed only in english translation.

Before normal was priority 2 in a 1-6 range, after it is priority 4 in a 1-6 range.
It should be IMHO 3 in that 1-6 range.

2143TranslationsTODOVery Lowjscalendar: week start should be monday, ISO 8601Confirmed
201.07.201603.03.2019 Task Description

The current jscalendar shows sunday as the first day of the week by default.

Could be modified for a language by adding

// First day of the week. 0 means Sunday, 1 means Monday
Calendar._FD = 1;


See also

It should default to Monday as defined by ISO 8601.

2498TranslationsInformationLowApply variable in language keys to push the local site ...Unconfirmed
118.09.201802.11.2018 Task Description

Hi, in order for us to push our name (rather than flyspray) on emails, notifications, and GUI we had to edit the language file to replace the text “flyspray” with our install site name. That way notifications come from our company name rather than flyspray.

It would be nice if you could take the site name variable and add it to the language files in all keys that face the public user and all notifications. This would not only prevent editing of the lang file but also make setup alot faster.

Thanks so much..

2531TranslationsFeature RequestLowdetect usage of translation keywordsNew
110.01.201919.03.2019 Task Description

Some translation keywords of Flyspray are used at more than one code location.

To help translators doing the correct translations, it would help to show in what context a translation keyword is used.
Especially when a keyword is used more than once.

As we have our own translation helper integrated into Flyspray, we could show a ‘translation keyword usage counter’ there and maybe show on request in which file
a translation keyword is used.

It would also help to identify ‘abandoned’ translation keywords that are not used anymore by Flyspray source.

Also it would help to identify when a translation is used at more than one location with maybe different context.

I think we can use a regular expression and scan the whole Flyspray source for that.
(and maybe database entries if there are places that have translation keywords stored - I don’t think so, but better check that too first than forget that case)

The regular expression should match that examples case insensitive for the translation keyword report:


but also ugly cases like
l(    'report'
El ( "report"

case insensitive.

But not for example

920User InterfaceFeature RequestLowCharts (gantt, severities, OSes, opened-closed, ...)Researching
2.017806.05.200618.07.2015 Task Description

With all informations on flyspray, it's possible to generate a gantt chart.
For this, some php code exists :

2097User InterfaceBug ReportMediumUrl incorrect for view attachementUnconfirmed
10116.01.201602.03.2016 Task Description

I’m using URL rewriting…

If I click on the link, the picture doesn’t appear.

It’s ok in task history. The right URL is


1950User InterfaceTODOMediumSolve confusing Flyspray group settings vs Project grou...Confirmed
1.0907.03.201511.11.2015 Task Description

This is taken from FS#1753:

The second reason being there is no way that I know of to automatically set a project usergroup to new members. I only have 1 project, but it seems the Global groups aren’t working (can still see tasks if “View Tasks” is unchecked) and I don’t know how to fix that.

And what I have to say - it is hard to tell if you are on the Flyspray admin settings area or on the admin settings of a project.

Cheapest way is adding some CSS to distinguish this for the user.

But there is in fact more to do to make it user friendly.

  • TODO: list configurations for project(task types, categories, ..) in Manage Project should also show the system wide list values as hint to avoid duplication.
  • TODO: project user groups overview should show system wide user group infos as info for project managers to avoid unnecessary complicated configuration settings.
  • TODO: visualize related permissions that can overrule eachother like ‘view_task’ overrules ‘view_own_tasks’ to avoid misconfigurations
1134User InterfaceFeature RequestLowadd icon/image for each projectPlanned
1.1 devel7329.11.200609.03.2015 Task Description

When we have several projects into flyspray, it's hard to see the project where I am when I add several tasks.
It's necessary to read the text.

To improve this, I think that it's a good idea if it's possible to add a color or an image with the logo project next to project title into web page. It will more simple to know where we are when we use flyspray.

2322User InterfaceFeature RequestMediumMention SystemNew
7107.12.201619.10.2019 Task Description

Hello together,

it would be nice, if you could mention user in your ticket or comment which are not following the task.
for example when i will type @nickname, the user “nickname” should be get a e-mail that he is mentioned in the ticket.

(if we are “fancy” then we can print a automcomplete after the @-sign ist typed)

2210User InterfaceInformationLowTasklist color for due dateUnconfirmed
612.10.201618.10.2016 Task Description


I was wondering if there is a way to make the task more visible if it wasn’t completed due to the date that was selected by a user - let’s say a yellowish background in tasklist, just like the ones from custom css based on severity, but that will take color if the task has the due date passed.

2303User InterfaceFeature RequestVery LowHome screen for private flyspraysRequires testing
625.10.201626.10.2016 Task Description

I use Flyspray as a closed system with all projects set to private. I use it as a main means of communication with my clients. In such a case it would be a good idea for visitors to see a home screen (preferably a blank/splash screen with login option only) and definitely not the All tasks title or project names ( FS#2302 ) or taskid search.

1040User InterfaceFeature RequestLowClose Multiple Tasks at onceNew
1.1 devel5317.08.200601.10.2015 Task Description

We don't close the tasks until the release is "made", that is we let them under "Requires Testing" with 100% complete. When the release/testing cycle is finished, somebody has to go task by task, and start closing them... it's a PITA ;)
It would be nice to have to option to select all the tasks you want to close, and that the "popup" when you enter the reason/etc, applied to all the tasks I selected...

I recall reading something about this in the past, but haven't found it; and if this is implemented, I haven't seen a way to do it in 099beta1

1736User InterfaceFeature RequestLowBe able to add colors for Task StatusesPlanned
1.1 devel516.05.201215.10.2015 Task Description

I often used color identifiers for my Task Statuses in my old bug tracking solution, and it helped me prioritize things, like confirming unconfirmed bugs. The only thing that currently has colors, is the severity- I’d like a possibility to have (customizable) colors for Task Statuses too.

1978User InterfaceBug ReportLowCompensate degraded usability due added token system an...Confirmed
1.0516.03.201512.10.2015 Task Description

Due to the needed implementation of an anti csrf system into Flyspray 1.0,
this are a side effect issues we need to address:

Due the required replacement of action links to form buttons:

  • The user cannot just see anymore the target url of the action by hovering over the link. We can compensate that in the simpliest case by using the title-tag as additional info to the user. Trust not full reestabilished that way, but better than nothing and user has fear to click a form button.

Javascriptless CSS3-toggles:

  • Some clickable labels don’t show pointer icon when :hover. CSS issue, easy fix.
2018User InterfaceBug ReportLowreview keyboard navigationResearching
1.1 devel526.07.201529.07.2019 Task Description

Keyboard navigation is not documented

At least there is no hint in the interface which keyboard shortcuts are available for fast navigation between task list and task details view.

Due to the dropping of the cookie storage for remembering last search or last selected task in favor of not interfering when multiple flyspray browser tabs are open (with e.g. different projects) ,
the caret list browsing with ‘j’,’k’,’o’ and details view isn’t useful at moment.

  1. keyboard based navigation must be documented somewhere, e.g. by providing hints (clickable icon for info or :hover ) at appropriate positions.
  2. navigation flow and technical realisation reviewed for keyboard power users

Edit: Currently handled by js event handler:

  • j move cursor down in task list
  • k move cursor up in task list
  • o open current selected task in task list
  • n next task on task details page
  • p previous task on task details page
grep -r 'accesskey' *

Current accesskeys (browserspecific + key):

  • a double usage for new task and newmultitask. Must hit [Enter] to open one of them; on newmultitask page it adds a new row.
  • e edit task on task details page
  • f copy firstline to the other rows on new multitask page
  • l show loginbox or logs you off
  • m toggle mysearchesbox
  • r reset? when dokuwiki plugin is used
  • s submit when dokuwiki plugin is used
  • w watch/unwatch task on task details page
  • n next task
  • p previous task
  • y close task
2098User InterfaceBug ReportMediumAttached image cannot be downloadedConfirmed
1.1 devel530.01.201610.01.2017 Task Description


- Attach an image to a task.
- It shows as a link in your task (cf. screenshot “Screenshot from 2016-01-29 18-34-31.png”).
- Click on the link.

Result: it opens a “popup” with the image displayed in it. If the image is big, the popup is just so huge the image is not visible without boring horizontal and vertical scrolling (see “Screenshot from 2016-01-30 15-07-26.png” which shows what I see when I click the image link on my task).
I can’t even right click to download from the menu since I see no “Save Image As” item. (see Screenshot-no-save-image-in-menu.png).

My workaround was that if I drag and drop the attachment link in the address bar, I finally get the expected image, which I can finally save as! This workaround was hard to find, and I expect most people will just get frustrated of being able to view an image attachment, yet not save it locally.

I proposes the following:
- a small “download” icon next to the image link in the task for direct download (without preview).
- a “download” link/icon on the top-left of the image display popup (to download while previewing).

And as a side feature (maybe I should make a separate report?), I suggest that by default the image display popup constrains the image to the screen size, with a “see real size” link, so that you don’t get the popup with huge scrolling when opening a big image on a smaller screen.

Note: of course this issue does not appear with non displayable attachment. If I have a zip or a document, it proposes me to download it directly.

2456User InterfaceBug ReportHighMissing GUI controlsUnconfirmed
509.02.201810.02.2018 Task Description

After updating from “1.0-rc6” to “1.0-rc7 dev” there is missing controls menu on writer. Look attachment.
How to solve this?

Is there any settings to enable this or I’m missing something...

2528User InterfaceBug ReportLowNew user registration doesn't check for duplicate usern...Confirmed
505.01.201907.01.2019 Task Description

Steps done to create the problem:
Visit in a private browser window (so you are logged out)

Put in an already taken username (e.g. Stefan or Stefan2)

Expected behavior:
Username gets red and a note appears that username already is taken

Experienced behavior:
Username gets green and registration of a new user proceeds with sending a notification mail with confirmation code.
After putting in the confirmation code in provided page, user gets presented a “username is already taken, choose another” (where?) message, and has to re-start registration process from beginning and hopefully this time choose a not taken name.

1481User InterfaceFeature RequestLowDiff visualisationUnconfirmed
4104.05.200809.03.2015 Task Description

Flyspray should be able to render attached patches visually like, for example, Bugzilla:

1967User InterfaceBug ReportLowKeep browser scroll position when sorting task listNew
1.1 devel412.03.201519.09.2015 Task Description

When I scroll down the page to see more of the task list and then click on one of the column headings to sot by this heading, the answer page doesn't scroll down to the table.

I think there are 2 technical solutions for that:

1. set an name/id a-anchor on top of the table and on each column heading link add for example '#tasklist'.

2. add a js-sorter with complete extra search and sort ajax-backend with e.g. libs from This requires aleso writing a server side handler for taking the ajax requests (respecting user permissions!) and is only usable if js in enabled in browser. So this second solution can only be a luxury comfort function.

1972User InterfaceFeature RequestLowAdvanced search form - ideas for faster/better usabilit...New
1.1 devel412.03.201518.03.2019 Task Description

This task can maybe splitted into separate sub tasks.

Task properties

Current situation

  • Currently 8 multi select fields with height of 5.5 visible options.
  • For most of the selects you must scroll to make the right selections.
  • floating


Multi select option styling

Some (not all, intentional!) browsers support CSS styling of option tags. For these who support it I think option styling is a good usability enhancement:

  • severity: We use background colors for styling in task list, so we should use the same colors for the select.
  • priority: maybe, but must be good distinguishable from severity styling. maybe not background, but maybe icons,borders,lines?
  • task type: This styling would be related to an other task, where I suggest icons/font icons for bugs, feature requests and TODO (see also themes/CleanFS/custom_example.css)
  • progress: maybe use the green %-bars as background styling
  • status: If for some status types very intuitive icons exists, they could be used for the options too.
  • due version: no idea yet, no option styling
  • reported version: no idea yet, no option styling

Update: CSS of option tags working in multi selects:

  • Firefox 64: yes
  • Safari 12: no
  • Google Chrome 71: no

So only Firefox. The intended styling could be also achieved by Javascript that renders alternative select boxes based on reading the original select boxes and their option attributes and show the user CSS styled div-tag or li-tag based constructs which do not have such restrictions.

Custom fields

  • challenge/doom level - doom faces: from easy/normal to bloody/angry face
  • os: logos like tux for linux, devil for bsd, window for ms, apple icon, osX icon, android, apple, iphone/smartphone icon, ipad/tablet icon, ..

But Consider: Different project may need different custom fields. Your gardening project may need no OS version selector.

  1. Make some intelligent positioning and sizing dependent on the count of options of the selects.
2031User InterfaceTODOLowRendering overduePlanned
1.1 devel412.08.201514.08.2015 Task Description

One of my task has 8.9166666666667 days left. This is very very very very accurate !

A rounding would look better !

Running Alpha2 now, Cannot use this on 'reported version' here on this site

Edit: Rounding is adhoc fixed on 2015-06-21 in dev in template file, but code should IMHO be centralized, not template, see comments

2081User InterfaceBug ReportLowUI for adding comment while editing task doesn't use HT...Confirmed
429.10.201506.11.2015 Task Description

While editing an existing task, there’s a “+” button you can click to add a comment as part of the edit. Unfortunately this is just a plaintext box instead of the HTML editor used everywhere else, so it’s impossible to get proper line/paragraph breaks if a comment is entered with this UI.

This problem makes it necessary to edit a task and add a comment as two separate steps, whereas in it was possible to do them together in one step.

Note that this is the case with syntax_plugin=”none”. I don’t know if it’s also a problem when using other values for that setting.

1236User InterfaceFeature RequestLowMark Issue As Verified or UnverifiableUnconfirmed
3409.04.200718.07.2016 Task Description

Currently, the Vote functionality provides users a way to say "this issue is important to me". In addition to that functionality, it would be great for users to have a "Verify" ability on open issues; it would provide users a way to say "yes, this happens to me as well".

A "Verified" label would fit nicely right under "Votes", to the right of the label would be "Yes | No", each option being a link. After clicking Yes or No, or if unable to specify (lack of permissions), the text would display "Yes - # | No - # (% verification)" where '%' is the result of ((Yes/(Yes+No))*100).

This feature should not show up on all issues, though. It does not make sense to "verify" a feature request or todo item, for example. When defining task types, the administrator would specify if a type was "Verifiable" by checking a box in a column next to "Show".

If implemented, two great, mini extra features would be:

  1. The ability for the administrator to set the number of "Yes" verifications an issue would need before it was elevated to the next priority, severity, or both (specified by the administrator).
  2. The ability for the administrator to set the number of "No" verifications an issue would need before it was lowered to the previous priority, severity, or both (specified by the administrator).

Both settings should have an option to be incremental (priority / status increased every x verifications) or not (increases once, no matter how many verifications are received); an "Incremental" checkbox would do nicely. Also, a little "Enabled" checkbox next to both settings would be clearer than having zero act as the disable mechanism.

As with voting, a permission should exist to enable or disable this option for a user group. For larger projects, moderators tasked with verifying bugs could be given the permission whereas smaller projects may leave verifications up to the community.

Lastly, a way to send a notification once the number of "Yes" verifications reached a certain value would also be a great addition.

1847User InterfaceFeature RequestLowMake default theme responsivePlanned
1.1 devel314.03.201316.10.2015 Task Description

I think it is time to think about an theme optimizied for mobile Devices.

We will not maintain several themes. We will review the current CleanFS theme to make it responsible instead.

1969User InterfaceFeature RequestLowsearch form with Advanced search toggle layoutNew
1.1 devel312.03.201519.09.2015 Task Description

I think the button advanced search button should not be placed right beside seach input field as full button.

Maybe a small down arrow under the simple search form with a horizontal line and a title tag as tooltip.

Any comments?

2074User InterfaceBug ReportMediumOpening tasks from tasklistNew
1.0318.10.201518.07.2016 Task Description

Removing table on row click made it impossible to open a task’ details if you do not display the task id and summary on the task list, because now those two cells are the only clickable items to open a task, instead of the entire line being the hyperlink

2108User InterfaceFeature RequestMediumSupport local language when install FlysprayConfirmed
3103.03.201615.07.2016 Task Description

Please show install page as local language, Thank you.

2136User InterfaceBug ReportMediumAfter updating user properties as admin - return to wro...Confirmed
308.06.201623.07.2016 Task Description

Logged in as admin, modify a users group membership. After clicking update, you are returned to your logged-in profile (admin in this case). It should re-display the user’s profile you are editing.

The ‘back’ button will return to updated page.

2309User InterfaceBug ReportLowPHP noticed displayed on default "All Projects" page.Unconfirmed
302.11.201626.11.2016 Task Description

I am seeing some noticed on the front page of our tracker install that were not present prior to updating to 1.0rc3.

Notice: Undefined offset: 1 in <redacted>/scripts/index.php on line 202 Notice: Undefined offset: 2 in <redacted>/scripts/index.php on line 202

It’s displaying the full path to the files on the page.

There are effectively 2 issues here. One is that some kind of error is kicking up. Second is that it’s being shown to anyone who visits the site.

2325User InterfaceFeature RequestLowbig image attachments: fit to browser window width in L...New
310.01.201711.01.2017 Task Description

Maybe this is not an issue, but my problem is: upload images approximately 3000 px x 2000 px and this image appears larger than the monitor
is it possible that the image is automatically resized to 800 px x xxx px size

(reported by Ivan Cilic)

2545User InterfaceInformationLowCan't delete system wide 'Task Statuses'Unconfirmed
320.04.201905.05.2019 Task Description

From the ‘Task Statuses’ menu, when in the global project, the ‘delete’ cases are grayed out, preventing me from deleting them.

This is a problem for me because I would like to only have project specific statuses and I would like to name one of those statuses ‘Assigned’.

For now, I got around it renaming the system wide ‘Assigned’ status.

1809User InterfaceFeature RequestLow Searching closed tasks by Reason for closingMaybe
2.0217.01.201306.11.2015 Task Description

how can I search tasks by "Reason for closing"? There is an option for searching for status but I do not want search by tasks' status but by reason for closing it. Is it possible to do it?

1957User InterfaceFeature RequestLowautomatic temporary storing while writing/editing taskResearching
209.03.201512.03.2015 Task Description

If I write a task and press the back button in the brower and go forward again, my expection is that the
text I wrote is still existing, even if I didn't save it.

It is frustrating losing a well thought issue editing and having it to rewrite.

1990User InterfaceFeature RequestLowRoadmap view should also show due dates and sort each v...Confirmed
1.1 devel217.04.201524.04.2015 Task Description

Title says all. Small usability fix that will be big

2004User InterfaceBug ReportLowphp notice on unset params on reports pageNew
1.1 devel218.07.201519.09.2015 Task Description

If on the reports page some get params aren't set, there are notice warnings on the report result page



without start date,end date,result size

But it can be useful to have a bit shorter urls for sharing between authorized users instead the full params url.

Result page should use user default and project default settings fallbacks for the unset get params.

2047User InterfaceFeature RequestMediumInserting images/screenshots from bufferUnconfirmed
2104.09.201529.09.2015 Task Description

Good if adding functional about easy way for insert screenshots to task

2072User InterfaceFeature RequestLowSetting parent task interface is too hiddenConfirmed
2116.10.201516.10.2015 Task Description


Today i was installed flyspray from git master and found some error.

Any user interface missing any fields to set parent task. Show parent field options was added in “fields when add/edit/view task” field at preferences page for project, but no affect.


Flyspray version: Github master branch

2124User InterfaceFeature RequestVery LowDefault avatar can't be restoredConfirmed
227.04.201629.04.2016 Task Description

I unchecked the avatar allowed in the admin panel. I checked it back and set size to 50.
I have to upload an Avatar picture to restore it, but the previous avatar looked like to be html avatar.

Is there a way to restore the html one ?

note: ‘default avatar’ is currently just that guy from the fontawesome webfonts:

<i class="fa fa-user"></i>
2126User InterfaceFeature RequestLowdynamic meta description (was: Change page title)Confirmed
1.1 devel217.05.201617.05.2016 Task Description


When i put a link in Discord for example, it detects “Flyspray, a Bug Tracking System written in PHP.” as title. How to change it ?

Edit by peterdd: adapted task title/summary to the root of the problem.

2490User InterfaceBug ReportMediumReset Password's Username field has maxlength of 20 - t...Confirmed
1.0201.09.201810.09.2018 Task Description

I’ve set up an account with a username longer than 20 characters, but can’t reset the password because the
page username field has maxlength=”20” The maxlength for a new user registration seems to be 32 characters.

A related concern is that when setting up the default/admin user on first load of the system, I can use an email address as username (always my preference), but it’s actually not a valid username to create for others thereafter. Consider allowing ‘@’ character in usernames.

1697User InterfaceFeature RequestMediumDetailed Due Date, SMS Notification, Deadline Warning N...Unconfirmed
128.12.201106.10.2015 Task Description

Hi there,

I was looking for some issue management tool for the company I work for and Flyspray turned out to be almost perfect solution. I installed it easily and it works GREAT!
As I said, this turned out to be almost perfect solution, and this is because it lacks some features that my company needs.

  • Due Date with Hour/Minute part - to choose till what time during that day should task be done (ie. 27-12-2012, 17:27)

Away with needs of my company, I believe that these features will make Flyspray very interesting and more suitable for many small/medium companies.

Best regards,

Milan Vlajnic

1749User InterfaceBug ReportLowSubmit form buttons on lower rightUnconfirmed
117.06.201224.09.2015 Task Description

Any form should have its submit button directly below and to the right of the form.

This is most egregious on the New Task page where you have to scroll back up to the top right to submit.

1857User InterfaceFeature RequestLowLogin and then submit new taskResearching
2.0127.03.201306.03.2015 Task Description

when I wanted to use Flyspray to manage request from non-technical customer, I found one missing feature:

I have "report a problem" link on devel version of web site. But to submit new task, it is necessary to login into Flyspray.

It would be nice if there was an URL with login form if user is not logged in and "add new task" form if he is logged in.

Example scenario:
- Customer visits devel site after some time and finds some problem. He wants to report it.
- Customer clicks "report a problem" on the devel site and Flyspray is opened.
- Customer now see some wierd error message and has no idea what is wrong. If anonymous reports are allowed, he sees the form, but cannot upload screenshots and he must enter his e-mail address.

How it should be:
- Customer visits devel site after some time and finds some problem. He wants to report it.
- Customer clicks "report a problem" on the devel site and Flyspray is opened.
- Customer sees login form and (if anonymous reports are allowed) there is also "add new task" form below the login form.
- Customer clicks "login" (password is saved in browser).
- Customer now can fill report with all the comfort.

1970User InterfaceFeature RequestLowIcons for predefined task typesNew
1.1 devel112.03.201530.10.2015 Task Description

for toplevel, roadmap and task list view.

For roadmap: replace the current ‘-’ between the task id and task summary with icons.

For toplevel: most wanted tasks and assigned to myself

ul.tasks li {clear:left;}
content: "\code";
font-family: FontAwesome;

On task list the column text can be replaced by icons, moving the text to title attribute.

Maybe use css :content-before or :content-after for that.

I suggest following font-icons from fontawesome are the easiest way to implement:

  • Bug Report use fa-bug , red color
  • Feature Request use fa-star , yellow
  • TODO a bold T, blue ( or blue fa-check?, but check mark maybe too ambiguous)

Gain: you faster see what types of task are on roadmap milestones and task list exists.

Showing tasks 201 - 250 of 299 Page 5 of 6<<First - 2 - 3 - 4 - 5 - 6 -

Available keyboard shortcuts


Task Details

Task Editing