Flyspray - The bug killer!

This is the Bug Tracking System for the Flyspray project. This is not a demo!

2019-04-22: Flyspray 1.0-rc9 released See https://github.com/Flyspray/flyspray/releases

ID Category Task Type Severity Summary Status Progress Assigned To Due In Version   desc Opened Last Edited
1955Backend/CoreTODOLowCodestyleConfirmed
0%
1.1 devel307.03.201509.03.2015 Task Description

So, the new website is now online, the codestyle part is empty and I think we need to speak about them...

I can happily reformat the whole project once we have decided the whole thing. Don't forget, too strict code style leads to code style not being respected, so crap like max line length should be avoided. I personnaly don't know anybody coding from their mobile phones. I sometimes do check some code on it, but long lines never disturbed me as long as the line is not 5k chars long.

I think we should go for a standard one.

Things like:

- Do use brackets even if single lined condition
- Variable names have spaces replaced by the next words first letter in capital, start with a lower case
- Same goes for functions
- Etc etc. Pretty much of PSR-1 maybe 2

What I don't understand is the use of spaces, and I'd be for tabs instead of 4 spaces (some files use 2 spaces, some 3...). Most of the dev tools are by default set to use tabs and not spaces. And be seeing the code now we see that it clearly. So i'd be for reformatting into tabs, the whole, and same time fixing the broken identation in every files.

I could write it down for the website

2058Backend/CoreBug ReportLowClosing of github.com 'Issues' featureNew
0%
24.09.201524.09.2015 Task Description

As discussed with the team some time ago, a consolidation of places where issues are discussed is wanted.

One of the results was, that we do not want people post issues to github.com Issues and instead use our own bugs.flyspray.org
and to prefer "to eat our own dogfood" and a have central place to handle tasks.

As a result we tried to reduce the open issueas on github.com. I was in the process of moving 2 of still 7 open issues there to bugs.flyspray.org when suddenly the Issues on github.com were closed. :-( Now the last 5 issues there are lost at the moment for me and the audience, which where mostly informations to interested users, not bugs.

I think just closing it without an easy accessible alternative is not the best solution.

At least we should wait until the oauth2 authentication for github users should be implemented and setup on bugs.flyspray.org , so people browsing github.com, finding Flyspray project just can
"Login with github"-feature on bugs.flyspray.org.

The blocker to do this: Currently there is missing an option to "connect" an oauth "Login with github"- Login with an existend flyspray userlogin.

So that one userid in flyspray can:

  • login with username and password
  • login with one or more of his social accounts (github, facebook, microsoft, g+) if they are enabled (would it restrict to github.com accounts for bugs.flyspray.org)
1858Backend/CoreFeature RequestLowClone Tasks and ProjectsMaybe
0%
2.0102.04.201315.09.2017 Task Description

My workplace is piloting Flyspray for an internal project and one feature that my boss was asking about was the ability to clone tasks and projects.

We have reoccurring simultaneous projects that contain a large number of testing tasks, and tasks dependent on other tasks, which makes starting up a new project very tedious. If it was possible to clone the contents of a task, or an entire project, we could create template tasks/projects that would really speed up the workflow.

2439Backend/CoreFeature RequestLowClone a ProjectNew
0%
15.09.201715.09.2017 Task Description

There is a request for cloning a project on Flyspray mailing list:

Would be a very welcome features to have Project Templates for repetitive workflow. Any idea if its in the pipeline?
Thanks

Well, not yet.

The question is, how exactly you want that project clone.

Do you want just a rough copy of the project table entry?
Thats quite easy and can even be done without programming or writing a line of SQL just by using PHPMyAdmin (or similiar Tools for PostgreSQL) and copy a row of the project table for example.
See yellow marked project table on the right of the attached dbschema screenshot.

The other extreme is copying every project depending list table entries to new ones.
This sure requires some programming, but not too hard to add this to Flyspray. (all yellow marked tables in the attached dbschema screenshot.

I attach a rough form mockup how could this could look like.

Possible solution

  1. add a new file scripts/ folder for instance copyproject.php (check admin permission)
  2. add a template file to themes/CleanFS/templates/copyproject.tpl
  3. Set a link to that clone form page somewhere, for example on the toplevel page of a project (see screenshot)
  4. Handle the adminuser (or add a clonepermission for that project manager usergroup) submitted form careful and savely either by includes/modify.inc.php (or like scripts/copyproject.php to keep it seperate from core)

The link to the clone form looks then ?project=123&do=copyproject

2214Backend/CoreInformationLowChanging status of task automaticallyUnconfirmed
0%
417.10.201606.11.2016 Task Description

Hello again,

I was wondering (again :-) ) if the following scenario is possible for this bug tracking solution:

Our company uses this bug tracker mainly for helpdesk issues. However, our main users (except IT department) don’t seem to easily understand how to change the status of a ticket, they aren’t interested in doing that also.

So I would like to know if there is a way that we can develop some automatisation in changing the status automatically after customer replies to a message.

Let’s see the following scenario:

  1. user A posts a new task
  2. user B assigns himself (or other) to that specific task - the status automatically is changed to Assigned
  3. user B replies to task by adding a comment - as a result of adding the new comment the task status should change automatically to Waiting for customer - without the need that user B to change the status
  4. user A checks the comment from user B and decides to comment back to him. After pressing the Add comment button, the status should change automatically to Waiting for assignee

If the task is needed to have another status, the users can change them manually, but the automated part should be the waiting for customer and assignee.

On a basic algorithm it shouldn’t be hard (if user is logged in and is task owner, then after comment, task detail - status changing to id 4-5 from task-statuses table on mysql; if user is logged in and assigned to task, after adding comment change status 4-5 from task-statuses table).

I saw this thing on an otrs platform and it is quite ok for a simple user like ours.

Is there any way that we can personalise the flyspray in this way?

If yes, please give us an elaborate answer with what I should do for this to work.

Thanks in advance.

1792Backend/CoreFeature RequestLowChanges from Deprecated 1.0.0New
0%
2.113.12.201203.03.2013 Task Description

Someone should go through all the changes from 1.0.0 and figure out which features should be ported to 1.0 devel and open tickets for them, and/or open tickets for the items that should be done in 2.0

2197Backend/CoreBug ReportHighChange Time for everyoneUnconfirmed
0%
121.08.201622.08.2016 Task Description

Flyspray does not recover the time set in php.ini. On display, the system has two hour delay.

2499User InterfaceBug ReportHighChange recaptcha from using file_get_contents to CurlUnconfirmed
0%
118.09.201802.11.2018 Task Description

The issue with many servers now and the reason that recaptcha does not work is because it requires servers to enable allow_url_fopen which is a huge security risk. That is why you get the warning message when you try to run recaptcha that file_get_contents failed to connect.

So the solution is to use Curl to do that job.

Here is the fixed file, excuse my mess i had not cleaned up my code yet... but recaptcha now works.

this file goes in the includes dir... you can clean up the file if you like again sorry about that.

2336Backend/CoreBug ReportHighCaptcha validation always fail on registrationUnconfirmed
0%
1301.02.201721.07.2018 Task Description

Correct or wrong code return false!

The results of Securimage Test Script on my server

This script will test your PHP installation to see if Securimage will run on your server.

Session Functionality: Yes!
GD Support: Yes!
GD Version: bundled (2.1.0 compatible)
imageftbbox function: Yes!
TTF Support (FreeType): Yes!
JPEG Support: Yes!
PNG Support: Yes!
GIF Read Support: Yes!
GIF Create Support: Yes!
SQLite Support: Yes!
SQLite is available. If you choose to use it, Securimage can support users who do not accept cookies.
MySQL Support: Yes!
MySQL is available. If you choose to use it, Securimage can support users who do not accept cookies by storing codes in MySQL.
PostgreSQL Support: No
No PostgreSQL support.
LAME MP3 Support: No
LAME was not found, audio will work in WAV format, but not MP3. See Securimage HTML5 audio documentation for info.
Your server meets the requirements for using Securimage!

on modify.inc.php line:754 got

if( !Post::isAlnum('captcha_code') || !$image->check(Post::val('captcha_code'))) {
if( true == false || false == false ) {
2160Backend/CoreBug ReportLowCannot "accept" PM close request if already closedUnconfirmed
0%
14.07.201614.07.2016 Task Description

If a task creator requested closure, and someone (developer) closes the task explicitly, the PM request cannot be later ‘accepted’ and the PM request remains in the queue.

Workaround - Deny request and queue item is removed OK.

It looks like the PM request button invoked details.close which returns early if task is already closed.

2545User InterfaceInformationLowCan't delete system wide 'Task Statuses'Unconfirmed
0%
320.04.201905.05.2019 Task Description

From the ‘Task Statuses’ menu, when in the global project, the ‘delete’ cases are grayed out, preventing me from deleting them.

This is a problem for me because I would like to only have project specific statuses and I would like to name one of those statuses ‘Assigned’.

For now, I got around it renaming the system wide ‘Assigned’ status.

1798Backend/CoreFeature RequestLowBounty System New
0%
2.0113.12.201206.03.2015 Task Description

Add a system where people can donate towards a specific task. For example, I want to donate $10 if someone implements gravatars. The money sits in a pool, and then when someone claims that task and it is marked as completed by the admin, they get the bounty (less some commission that goes towards the project).

2325User InterfaceFeature RequestLowbig image attachments: fit to browser window width in L...New
0%
310.01.201711.01.2017 Task Description

Maybe this is not an issue, but my problem is: upload images approximately 3000 px x 2000 px and this image appears larger than the monitor
is it possible that the image is automatically resized to 800 px x xxx px size

(reported by Ivan Cilic)

2480Backend/CoreInformationLowBetter file organizationUnconfirmed
0%
110.08.201810.08.2018 Task Description

Save public files inside public or public_html directories, and non-public files outside of those directories;

config file

vendor directory

setup logic

etc

This goes onto another question/point - why are you deleting files from the vendor directory? It happens during composer install, and again after installation? Those files will just get put back if the user ever runs composer install again...

1924Backend/CoreBug ReportLowBetter errors messages on email errorNew
0%
1.1 devel11.07.201406.03.2015 Task Description

When entering the wrong SMTP information and then adding a user through Multiple New Users page, the error message is bad. It just says 'this should never happen'. Instead, we need to detect that it is an SMTP authentication error and report that issue to the user more clearly.

1720Backend/CoreFeature RequestLowBetter Access Control Lists and User / Group ManagementPlanned
0%
1.1 devel301.05.201220.03.2015 Task Description

We need to have a better way to do user rights, group rights and manage users.

Here is what I am thinking, global administration can go to a ACL tab. Click on it and you have a simple way to add a new user / group. Two tabs on top are User Rights and Group Rights. These are global so each project will inherit the global setting for user / group.

Clicking on User Rights tab will lists users with a table to grant user rights. Specific to that user, it would be the same for group rights tab.

You can also search by a user name. This will make things faster to find that specific user.

1736User InterfaceFeature RequestLowBe able to add colors for Task StatusesPlanned
50%
1.1 devel516.05.201215.10.2015 Task Description

I often used color identifiers for my Task Statuses in my old bug tracking solution, and it helped me prioritize things, like confirming unconfirmed bugs. The only thing that currently has colors, is the severity- I’d like a possibility to have (customizable) colors for Task Statuses too.

2086Backend/CoreBug ReportHighBasic User can see all Projects and TasksUnconfirmed
20%
803.11.201526.01.2017 Task Description

Since Update to Flyspray 1.0 Beta2 all users can see every task in every project.

The rights were set up correctly in Flyspray 1.0 Alpha and worked just fine.

1957User InterfaceFeature RequestLowautomatic temporary storing while writing/editing taskResearching
0%
209.03.201512.03.2015 Task Description

If I write a task and press the back button in the brower and go forward again, my expection is that the
text I wrote is still existing, even if I didn't save it.

It is frustrating losing a well thought issue editing and having it to rewrite.

2459User InterfaceFeature RequestLowAttachments on/off and max size setting in Admin Toolbo...Unconfirmed
0%
116.02.201803.03.2018 Task Description

It would be great if the Admin Toolbox had an attachments section with an on/off switch, a max size setting, and it would print out all the reasons why it can’t set it to your desired value.

This would help in situations like  FS#2458 , it would be more clear if there is a setting to turn on/off attachments instead of turning them on and off by setting the rights if the attachments folder.

This way if the attachments setting is On, the GUI could also print an error “Attachments folder must be writable” when it detects that the writable attribute does not match the desired setting.

2098User InterfaceBug ReportMediumAttached image cannot be downloadedConfirmed
50%
1.1 devel530.01.201610.01.2017 Task Description

Steps:

- Attach an image to a task.
- It shows as a link in your task (cf. screenshot “Screenshot from 2016-01-29 18-34-31.png”).
- Click on the link.

Result: it opens a “popup” with the image displayed in it. If the image is big, the popup is just so huge the image is not visible without boring horizontal and vertical scrolling (see “Screenshot from 2016-01-30 15-07-26.png” which shows what I see when I click the image link on my task).
I can’t even right click to download from the menu since I see no “Save Image As” item. (see Screenshot-no-save-image-in-menu.png).

My workaround was that if I drag and drop the attachment link in the address bar, I finally get the expected image, which I can finally save as! This workaround was hard to find, and I expect most people will just get frustrated of being able to view an image attachment, yet not save it locally.

I proposes the following:
- a small “download” icon next to the image link in the task for direct download (without preview).
- a “download” link/icon on the top-left of the image display popup (to download while previewing).

And as a side feature (maybe I should make a separate report?), I suggest that by default the image display popup constrains the image to the screen size, with a “see real size” link, so that you don’t get the popup with huge scrolling when opening a big image on a smaller screen.

Note: of course this issue does not appear with non displayable attachment. If I have a zip or a document, it proposes me to download it directly.

1843Backend/CoreFeature RequestLowAttach 1 ticket to multiple projectsMaybe
0%
2.007.03.201306.03.2015 Task Description

As title says

1521Backend/CoreFeature RequestLowAssignees should be able to see and create reminders fo...Unconfirmed
0%
22.11.200818.04.2009 Task Description

In version 0.9.9.5.1 (unfortunately I couldn't select this version in the dropdown list on the left), reminders can only be created and edited by Admins and Project Managers. I recommend to give Assignees the permission to create reminders for themselves. To minimize any programming impact, his may be done as part of the "edit own tasks" permission.

This topic has been reported by Engie as part of Bug #713 for version 0.9.8 as well: "Also it would be useful if a user could create reminder for himself." Although that bug is already closed ("fixed in devel"), this part is not yet solved in the current version.

2112APIBug ReportMediumAssigned tickets aren't editable for lower privileged u...Unconfirmed
0%
231.03.201611.04.2016 Task Description

An assigned ticket can't be edited by a lower privileged user.

Steps to reproduce:

  • One Project, Two Users. User A is Admin, User B is Basic
  • A creates a Task.
  • A take ownership of the Task. (it’s important to do this AFTER saving the task. You cannot assign User A if you are A in this moment. Maybe another Bug...!?)
  • Now B is allowed to take ownershop too. B click now “Add me to assignees”.
  • Now B can edit the task.
  • If B click “save”, the task can’t be saved, because some fields haven’t the correct values (esp: state is now “unconfirmed”). Many error messages said, that unexpected values exist

Some weird moments:

  • Why can B edit a task? He have no rights to edit tasks...
  • If B are Basic and have “edit own Task”-Right too, this bug also exist.
1670User InterfaceFeature RequestLowAssign Key-Shortcuts to form fieldsUnconfirmed
0%
04.12.201004.12.2010 Task Description

Forms should be submittable by using keyboard shortcuts.
S for submit.
Set-able via the accesskey attribute on HTML inputs.

2498TranslationsInformationLowApply variable in language keys to push the local site ...Unconfirmed
0%
118.09.201802.11.2018
2053Backend/CoreBug ReportLowambiguous user name displayNew
0%
1.1 devel17.09.201517.09.2015
2447Backend/CoreFeature RequestMediumAllow notifications when a new task is createdUnconfirmed
0%
226.10.201729.10.2017
2427Backend/CoreFeature RequestLowallow hotlinking (direct links) to uploaded filesUnconfirmed
0%
207.03.201709.03.2017
2136User InterfaceBug ReportMediumAfter updating user properties as admin - return to wro...Confirmed
0%
308.06.201623.07.2016
1972User InterfaceFeature RequestLowAdvanced search form - ideas for faster/better usabilit...New
0%
1.1 devel412.03.201518.03.2019
2344NotificationsBug ReportLowAdmins still get noticed for new users even with the op...Unconfirmed
50%
616.02.201724.03.2017
1485User InterfaceFeature RequestLowAdditional extended Printview for the TasksPlanned
0%
2.013.05.200811.03.2015
2089Backend/CoreBug ReportMediumadding same taskid as subtask or related task should be...New
50%
1.0207.11.201518.11.2016
2025User InterfaceFeature RequestLowAdding new tasks is too undiscoverableUnconfirmed
0%
109.08.201509.08.2015
2328Backend/CoreFeature RequestMediumAdd [key] support for each project instead of FS#Unconfirmed
0%
1120.01.201710.02.2017
1959User InterfaceFeature RequestLowAdd vote from tasklistPlanned
0%
1.1 devel09.03.201509.03.2015
1734Backend/CoreBug ReportLowAdd Timezone Selection to Admin PanelMaybe
0%
2.0112.05.201207.03.2015
2573Backend/CoreTODOLowadd rel nofollow,ugc,.. settingsNew
20%
peterdd114.09.201915.09.2019
2139User InterfaceFeature RequestVery LowAdd project setting of popular used programming languag...New
0%
1.1 devel17.06.201617.06.2016
2052Text RenderingFeature RequestLowAdd Markdown syntax option for task descriptionsUnconfirmed
0%
216.09.201508.08.2016
2572User InterfaceTODOLowadd link attributes ugc and nofollow to user generated ...New
0%
13.09.201913.09.2019
2096Backend/CoreFeature RequestVery LowAdd an option to force httpsMaybe
0%
316.01.201617.01.2016
1991User InterfaceFeature RequestMediumAbillity to drill into progress graph from toplevel vie...New
0%
17.04.201524.04.2015
2575Backend/CoreFeature RequestLowability to view and reset Flyspray default settingsNew
0%
19.09.201919.09.2019
2561Backend/CoreFeature RequestMediumability to limit assignee permissions (was:User without...Confirmed
0%
705.08.201908.08.2019
1971Backend/CoreFeature RequestLowa field like challenge level or doom levelNew
0%
12.03.201512.03.2015
2559Backend/CoreBug ReportLowa duplicate close accepted even when missing comment/ r...New
0%
peterdd29.07.201929.07.2019
2345Text RenderingBug ReportLow<hr> should be in allowed tagsUnconfirmed
0%
220.02.201723.02.2017
2121Backend/CoreBug ReportMedium'my assigned tasks' uses like %?% search instead of use...Confirmed
90%
1.0319.04.201603.02.2018
Showing tasks 251 - 300 of 301 Page 6 of 7<<First - 3 - 4 - 5 - 6 - 7 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing